Shark IP3251CHT Vacuum Cleaner Manual

The Shark IP3251CHT is a high-performance cordless stick vacuum cleaner featuring DuoClean PowerFins technology, Anti-Hair Wrap brushroll, LED headlights, a detachable pod for handheld cleaning, multiple cleaning modes, a large-capacity dust cup, and a wall-mount charging dock. It is designed for versatile cleaning on various surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Vacuum 7. Maintenance & Cleaning 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean PowerFins brushroll, Detachable handheld pod, Wall-mount charging dock, LED headlights, Multiple cleaning attachments.

Feature	Description
DuoClean PowerFins	Dual brushrolls for carpets and hard floors
Anti-Hair Wrap brushroll	Prevents hair tangles during cleaning
LED headlights	Illuminates dark areas under furniture
Detachable handheld pod	Converts to a portable vacuum for above-floor cleaning
Multiple cleaning modes	Eco, Normal, and Max suction settings
Large-capacity dust cup	Easy-to-empty, washable dust cup
Wall-mount charging dock	For convenient storage and charging
POWER button	Turns vacuum on/off and cycles through modes
RELEASE button	Detaches handheld pod from stick
Battery indicator	LED lights show remaining battery charge

Assembly & Installation

Unpack and inspect all contents. Assemble the vacuum for first use.

Attach the handle: Insert the handle into the main body until it clicks securely.
Install the floor nozzle: Align the nozzle with the main body and push until it locks.
Mount the charging dock: Secure the dock to a wall using provided screws and anchors.
Place the vacuum on the dock: Ensure charging contacts align properly.

WARNING! Ensure the vacuum is turned off and unplugged from the charger during assembly. Keep small parts away from children.

First-Time Setup

Charge the vacuum fully before first use.

Initial charge: Place the vacuum on the charging dock; charge for at least 4 hours.
Battery indicator: Check that LED lights illuminate during charging.
Test operation: Press the POWER button to ensure vacuum turns on.
Attach accessories: Connect desired cleaning tools for handheld use.

CAUTION! Use only the provided charger and dock. Do not charge near water or heat sources.

Specifications

Model: Shark IP3251CHT.
Type: Cordless stick vacuum with handheld pod.
Technology: DuoClean PowerFins, Anti-Hair Wrap.
Battery: Rechargeable lithium-ion.
Run Time: Up to 60 minutes (Eco mode), 30 minutes (Normal), 15 minutes (Max).
Dust Cup Capacity: 0.7 quarts (dry).
Charging Time: Approximately 4 hours for full charge.
Weight: 7.5 lbs (with floor nozzle attached).
Included Accessories: Crevice tool, upholstery tool, dusting brush, wall-mount dock.

Controls and Settings

Main controls located on the handle. POWER button: Press to turn on/off; press repeatedly to cycle through Eco, Normal, and Max modes. RELEASE button: Press to detach handheld pod. Battery indicator: Shows charge level with LED lights.

Cleaning Modes: Eco (extended runtime, lower suction), Normal (balanced cleaning), Max (maximum suction for deep cleaning).

Accessory attachment: Push accessories onto the handheld pod until they click into place. Dust cup release: Press the release button to remove the dust cup for emptying.

Using the Vacuum

For floor cleaning: Use the floor nozzle on carpets or hard floors. For above-floor cleaning: Detach the handheld pod and attach desired tool.

Turn on the vacuum: Press the POWER button.
Select mode: Choose Eco, Normal, or Max based on cleaning needs.
Clean floors: Push the vacuum forward and back in overlapping strokes.
Switch to handheld: Press RELEASE button, attach tool, and clean upholstery, stairs, or crevices.
Empty dust cup: Press release button, hold over trash, and open the bottom lid.

Tip: Use the LED headlights to see debris in dark areas. Regularly empty the dust cup to maintain suction.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup after each use: Open the bottom lid and tap out debris.
Clean the filter: Remove and rinse the foam and felt filters monthly; air dry completely before reinserting.
Clear brushroll tangles: Turn off vacuum, remove floor nozzle, and cut away any wrapped hair or fibers.
Check for blockages: Inspect hose, nozzle, and accessories for obstructions.

WARNING! Always turn off and remove from charger before maintenance. Do not use the vacuum without filters installed.

Battery & Charging

Use the provided wall-mount charging dock.

Charging: Place vacuum on dock; ensure contacts connect. Battery indicator lights will show charging status. Run time varies by mode: Eco (up to 60 min), Normal (up to 30 min), Max (up to 15 min).

Battery care: Store in a cool, dry place. Avoid fully discharging the battery regularly. If not using for extended periods, store with a 50% charge.

Care & Storage

Store the vacuum on the wall-mount dock when not in use. Keep away from moisture and extreme temperatures.

CAUTION! Do not store with a wet filter or dust cup. Keep the vacuum and charger away from children and pets.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product contains a lithium-ion battery; follow local regulations for disposal.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Low battery/charging issue	Place on charger; ensure dock is plugged in; check power outlet.
Reduced suction	Full dust cup/clogged filter	Empty dust cup; clean or replace filters; check for blockages.
Brushroll not spinning	Hair/debris wrap	Turn off, remove nozzle, and clear brushroll of tangles.
Battery drains quickly	Mode setting/filter	Use Eco mode for longer runtime; ensure filters are clean and dry.
Vacuum won't charge	Dirty contacts/dock issue	Clean charging contacts on vacuum and dock; ensure dock is securely mounted.

Reset: Remove from charger, hold POWER button for 10 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com