Shark IONFLEX Vacuum Cleaner Manual

The Shark IONFLEX is a cordless, lightweight stick vacuum cleaner with DuoClean PowerFins technology, Flexology bendable wand, LED headlights, Anti-Allergen Complete Seal, and a removable battery. It features multiple cleaning modes, a self-cleaning brushroll, and converts to a handheld vacuum. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Flexology wand, DuoClean PowerFins floor nozzle, removable dust cup, removable battery, charging dock, and accessory attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach wand: Insert wand into main body until it clicks securely.
2. Attach floor nozzle: Connect floor nozzle to wand until it clicks.
3. Install battery: Insert battery into slot on main body until locked.
4. Place on charging dock: Dock charger on wall or flat surface; place vacuum on dock to charge.

WARNING! Ensure all parts are securely connected before use. Do not force connections.

First-Time Use

Fully charge battery before initial use.

1. Charge: Place vacuum on charging dock; LED indicator will show charging status.
2. Power on: Press POWER button to start vacuum.
3. Select mode: Use mode selector for Eco (longer runtime) or Max (maximum suction).
4. Begin cleaning: Push vacuum forward on floors; use attachments for above-floor areas.
5. Empty dust cup: Press release button to remove and empty dust cup after use.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Type: Cordless stick vacuum with handheld conversion.
• Technology: DuoClean PowerFins, Anti-Allergen Complete Seal.
• Battery: Removable lithium-ion, up to 50 minutes runtime (Eco mode).
• Charging Time: Approximately 3.5 hours for full charge.
• Dust Cup Capacity: 0.4 dry quarts.
• Weight: 7.5 lbs (with battery and floor nozzle).
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz charging dock.
• Warranty: 5-year limited warranty (subject to registration).

Controls and Modes

Main controls located on handle. POWER button: Turns vacuum on/off. Mode selector: Toggles between Eco (standard) and Max (high power).

LED Indicators: Battery status (green = charged, red = low, flashing = charging).

Cleaning Modes: Eco for extended cleaning on hard floors and low-pile carpets; Max for deep cleaning on high-pile carpets and concentrated messes. Flexology Wand: Bend wand by pressing release button and adjusting angle. Self-Cleaning Brushroll: Automatically removes hair wrap during operation.

Cleaning Attachments

Accessories for above-floor cleaning: attach to wand or handheld unit.

1. Crevice Tool: For tight spaces, edges, and corners.
2. Dusting Brush: For delicate surfaces, shelves, and electronics.
3. Upholstery Tool: For sofas, chairs, and stairs.
4. Under-Appliance Wand: For cleaning under refrigerators and furniture.

Tip: Ensure vacuum is off before changing attachments.

Operation Guide

For optimal cleaning performance.

1. Floor cleaning: Use floor nozzle on carpets and hard floors; vacuum in forward/backward motions.
2. Above-floor cleaning: Remove wand, attach desired tool, and use in handheld mode.
3. Under furniture: Bend Flexology wand to clean without moving furniture.
4. Empty dust cup: Press release button, remove cup, empty into trash, and reinstall.
5. Clean filters: Remove and rinse foam and felt filters monthly (see Maintenance).
6. Check brushroll: Regularly remove debris from brushroll area.

WARNING! Do not vacuum wet liquids, large objects, or hot ashes. Unplug charger when not in use.

Maintenance & Care

Regular maintenance ensures peak performance.

1. Empty dust cup after each use.
2. Clean filters monthly: Rinse foam and felt filters under water; air dry completely for 24 hours before reinstalling.
3. Clear brushroll: Remove hair and debris from brushroll regularly.
4. Inspect attachments: Keep tools free of blockages.
5. Store properly: Place vacuum on charging dock or in a dry area.

CAUTION! Do not use vacuum without filters installed. Ensure all parts are completely dry before reassembly.

Battery & Charging

Removable lithium-ion battery for cordless convenience.

1. Charging: Place vacuum on dock; LED will flash red while charging, solid green when fully charged.
2. Battery removal: Press battery release button to remove for storage or replacement.
3. Runtime: Up to 50 minutes in Eco mode, 15 minutes in Max mode.
4. Battery care: Store in a cool, dry place; avoid extreme temperatures.
5. Replacement: Use only Shark-approved batteries (model SV1106).

Note: Battery performance decreases over time; replace if runtime is significantly reduced.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Reset: Remove battery for 10 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com