Shark ION X40 Vacuum Cleaner Manual

The Shark ION X40 is a versatile cordless stick vacuum cleaner featuring a lightweight design, powerful suction, dual-brushroll system for multi-surface cleaning, LED headlights, a removable battery, and multiple cleaning modes. It includes a docking station, crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lightweight stick vacuum body, Dual-Brushroll system, LED headlights, Removable battery, Docking station, Crevice tool, Dusting brush, Upholstery tool.

Assembly & Setup

Unpack and inspect all contents. Assemble components as follows.

1. Attach handle: Insert handle into main body until it clicks securely.
2. Install battery: Slide battery into compartment until it locks.
3. Mount docking station: Use included screws to mount on wall near outlet.
4. Attach cleaning tools: Store tools on docking station or attach as needed.

WARNING! Ensure vacuum is turned off during assembly. Keep small parts away from children.

First-Time Use

Charge battery fully before first use.

1. Charge: Place vacuum on docking station; charge until indicator shows full (approx. 4 hours).
2. Power on: Press POWER button; select Eco mode for general cleaning.
3. Adjust settings: Use mode selector for Max power on carpets or Eco for hard floors.
4. Empty dust cup: Press release button to remove and empty after each use.

CAUTION! Do not use on wet surfaces. Ensure area is clear of large debris before vacuuming.

Specifications

• Type: Cordless Stick Vacuum Cleaner.
• Battery: Lithium-ion, removable, 40V.
• Run Time: Up to 40 minutes in Eco mode; 20 minutes in Max mode.
• Suction Power: Adjustable via Eco/Max modes.
• Brushrolls: Dual brushroll system for carpets and hard floors.
• Dust Cup Capacity: 0.5 liters.
• Weight: 7.5 lbs (without attachments).
• Charging Time: Approximately 4 hours.
• Included Tools: Crevice tool, dusting brush, upholstery tool.

Controls and Modes

Access controls via handle and body. Front Panel: POWER button, Mode selector, Battery indicator LEDs.

Handle: POWER trigger, Mode switch (Eco/Max).

Modes: Eco (standard cleaning, longer run time), Max (maximum suction for heavy dirt). Battery Indicator: 3 LEDs show charge level (green = high, yellow = medium, red = low). Maintenance: Empty dust cup regularly; clean filters monthly; check brushroll for obstructions.

Cleaning Attachments

Use appropriate tool for each surface. Attach by pressing into nozzle until click.

1. Crevice Tool: For edges, corners, and between cushions.
2. Dusting Brush: For shelves, blinds, and delicate surfaces.
3. Upholstery Tool: For sofas, chairs, and stairs.

Tip: Turn off vacuum before changing attachments.

Battery & Charging

Supports removable lithium-ion battery.

1. Charging: Place vacuum on docking station or plug charger directly into battery.
2. Battery Indicator: Check LEDs for charge status.
3. Replacement: Press battery release button to remove; insert spare battery.
4. Storage: Store in cool, dry place; charge fully before long storage.

WARNING! Use only Shark-approved batteries and chargers. Do not expose battery to extreme temperatures.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty Dust Cup: Press release button; empty after each use.
2. Clean Filters: Rinse foam and felt filters monthly; air dry completely before reinserting.
3. Clear Brushroll: Remove hair and debris from brushroll weekly.
4. Check for Blockages: Inspect hose and nozzle if suction decreases.

CAUTION! Unplug charger and remove battery before maintenance. Do not use water on electrical parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Remove and reinsert battery if unresponsive.

Service: 1-800-798-7398; www.sharkclean.com