Shark ION RV850 Series Vacuum Cleaner Manual

The Shark ION RV850 Series is a versatile robot vacuum cleaner featuring Wi-Fi connectivity, app control, voice command compatibility, multi-surface cleaning with brush rolls, self-cleaning brushroll technology, smart sensor navigation, a high-capacity dustbin, and rechargeable lithium-ion battery. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi & App 7. Cleaning Modes and Scheduling 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum unit, Charging Dock, Power Adapter, Side Brushes, Filter, User Manual.

Feature	Description
Wi-Fi Connectivity	Connects to home network for app and voice control
Multi-Surface Cleaning	Automatically adjusts between carpets and hard floors
Self-Cleaning Brushroll	Reduces hair wrap for easier maintenance
Smart Sensor Navigation	Detects and avoids obstacles, cliffs, and drop-offs
High-Capacity Dustbin	Easy-remove bin for quick debris disposal
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Voice Control	Works with Amazon Alexa and Google Assistant
SharkClean App	Schedule cleanings, select modes, monitor status
Dual Side Brushes	Sweeps debris from edges and corners
HEPA Filter	Captures allergens and fine dust

Unpacking and Setup

Unpack and inspect all contents. Prepare the charging area.

Place the Charging Dock: On a level surface against a wall, clear of obstacles on both sides.
Charge the Robot: Plug the power adapter into the dock, then into a wall outlet. Place the robot on the dock contacts.
Install Side Brushes: Snap the left and right side brushes onto the bottom of the robot.
Prepare Cleaning Area: Remove loose cords, small objects, and fragile items from the floor.

WARNING! Ensure the dock is on a stable, level surface. Keep away from stairs and heat sources.

First-Time Use

Fully charge the robot before first use; follow setup prompts in the app.

Initial Charge: Allow the robot to charge for at least 4 hours until the indicator light is solid.
Download the App: Search for "SharkClean" in your device's app store and install.
Connect to Wi-Fi: Follow in-app instructions to connect the robot to your home network.
Test Run: Press the CLEAN button on the robot or in the app to start a cleaning session.

CAUTION! Do not operate the robot on wet surfaces or use it to pick up liquids.

Specifications

Model Series: Shark ION RV850.
Power Source: Rechargeable Lithium-Ion Battery.
Charging Time: Approximately 4 hours.
Run Time: Up to 90 minutes per charge (varies by mode).
Dustbin Capacity: 0.5 liters.
Filtration: HEPA filter included.
Connectivity: 2.4 GHz Wi-Fi only.
Compatibility: iOS 10.0+, Android 5.0+, Amazon Alexa, Google Assistant.
Operating Noise Level: < 70 dB.
Weight: 6.8 lbs (3.1 kg).

Controls and Indicators

Access controls via physical buttons, SharkClean App, or voice commands. Robot Top: CLEAN/PAUSE button, SPOT CLEAN button, DOCK button, Wi-Fi Indicator Light, Battery/Status Light.

App Controls: Start/Pause, Dock, Spot Clean, Schedule, Mode Selection (Eco, Normal, Max), Cleaning History.

Indicator Lights: Solid blue (Charging/Full), Flashing blue (Cleaning/Error), Solid red (Low battery/Error). Wi-Fi Light: Solid (Connected), Flashing (Setup mode/Disconnected).

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and smartphone/tablet.

Ensure the robot is powered on and near your Wi-Fi router.
Open the SharkClean App and create/log in to your account.
Tap "Add Robot" and follow the on-screen instructions.
Select your Wi-Fi network and enter the password when prompted.
Wait for the connection confirmation in the app.

Tip: For voice control, link your Shark account in the Alexa or Google Home app after setup.

Cleaning Modes and Scheduling

Supports multiple cleaning modes and scheduled cleanings.

Start Cleaning: Press CLEAN on robot or app, or use voice command.
Modes: Select in app – Eco (quiet, longer runtime), Normal (balanced), Max (deep clean, shorter runtime).
Spot Clean: Press SPOT CLEAN button; robot cleans a concentrated 3-foot diameter area.
Schedule: In app, set daily or weekly cleaning schedules for specific times.
Pause/Resume: Press CLEAN button to pause; press again to resume.
Send to Dock: Press DOCK button on robot or in app, or use voice command.
Recharge & Resume: Enable in app; robot will return to dock when low, recharge, then finish the job.

WARNING! Always clear the floor of cables, socks, and other small objects before cleaning.

Maintenance and Care

Regular maintenance ensures optimal performance. Unplug the dock before maintenance.

Empty Dustbin: After each cleaning cycle, remove and empty the dustbin.
Clean Filter: Tap out debris weekly; rinse with cold water every 1-2 months (air dry 24 hrs).
Clean Brushes: Remove brushroll and side brushes monthly; clear any hair or debris.
Clean Sensors: Wipe cliff and navigation sensors with a dry cloth weekly.
Clean Charging Contacts: Wipe robot and dock contacts with a dry cloth monthly.

CAUTION! Do not use the robot without the filter installed. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. ICES-003 Compliance: Class B digital apparatus. Copyright © SharkNinja Operating LLC. Shark, Shark ION, and associated logos are trademarks of SharkNinja. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't start	Low battery/Not on dock	Place on charging dock; ensure power outlet is working.
Not connecting to Wi-Fi	Wrong network/Password	Ensure using 2.4 GHz network; re-enter password; restart robot and router.
Poor cleaning performance	Full dustbin/Clogged brush	Empty dustbin; clean filter; clear brushroll of debris.
Robot gets stuck frequently	Cluttered floor/Weak signal	Clear floor of obstacles before cleaning; ensure dock is in open area.
Error light flashing	Wheel/brush obstruction	Turn robot over; check and clear all wheels and brushes.
Not returning to dock	Blocked path/Dock moved	Ensure clear path to dock; do not move dock while cleaning.

Reset: Hold DOCK and SPOT CLEAN buttons for 10 seconds to reset Wi-Fi settings.

Service: 1-888-228-5531; sharkclean.com/support