Shark ION RV765 Vacuum Cleaner Manual

The Shark ION RV765 is a versatile, cordless stick vacuum cleaner designed for whole-home cleaning. It features a lightweight, self-standing design, a removable pod for handheld cleaning, a high-efficiency filter system, and a multi-surface brushroll. Powered by a rechargeable lithium-ion battery, it offers powerful suction for carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Removable handheld pod, Charging dock, Multi-surface brushroll, Crevice tool, Dusting brush, High-efficiency filter.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the handle: Insert the handle into the top of the main vacuum body until it clicks.
2. Install the floor nozzle: Align the nozzle with the connector on the vacuum body and push until it locks.
3. Connect the charging dock: Plug the power adapter into the dock and then into a standard 120V AC wall outlet.
4. Place vacuum on dock: Set the vacuum onto the charging dock to begin initial charging.

WARNING! Ensure all parts are securely connected before first use. Do not force connections.

First-Time Use

Fully charge the vacuum before first use. The battery indicator will show a solid light when charging is complete.

1. Remove from dock: Lift the vacuum straight up from the charging dock.
2. Select power mode: Press the POWER button to cycle between Eco (longer runtime) and Max (maximum suction) modes.
3. Begin cleaning: Push the vacuum forward on your floor surface. The brushroll will engage automatically.
4. Use attachments: For above-floor cleaning, press the RELEASE button to detach the pod and attach the desired tool.

CAUTION! Keep hair, loose clothing, fingers, and feet away from brushroll and openings.

Specifications

• Model: Shark ION RV765.
• Type: Cordless, rechargeable stick vacuum.
• Battery: Lithium-ion, rechargeable.
• Run Time: Up to 40 minutes in Eco mode.
• Charging Time: Approximately 3.5 hours for a full charge.
• Dust Cup Capacity: 0.5 dry quarts.
• Filtration: High-efficiency filter with foam and felt.
• Attachments: Multi-surface brushroll, crevice tool, dusting brush.
• Power Source: 120V AC, 60Hz charging adapter.
• Weight: 7.5 lbs (approx.).

Controls and Indicators

Main Controls: POWER button (On/Off, mode select), RELEASE button (pod detachment).

Indicator Lights: Battery status LEDs (show charge level). A flashing light indicates low battery or a charging error.

Power Modes: Eco (standard cleaning, longer runtime), Max (deep cleaning, maximum suction). Install: Ensure vacuum is properly seated on charging dock. Maintenance: Filter check indicator (if equipped).

Cleaning Modes & Attachments

Stick Mode: For everyday floor cleaning. Handheld Mode: Detach pod for stairs, furniture, and cars.

1. Turn off the vacuum before changing modes or attachments.
2. To detach pod: Press the RELEASE button and lift the pod away from the stick.
3. Attach tools: Press the tool directly onto the pod's nozzle until it clicks.
4. Select the appropriate tool: Use the crevice tool for tight spaces; dusting brush for shelves and blinds.

Tip: For best results on carpets, use slow, overlapping forward and backward strokes.

Emptying the Dust Cup

Empty the dust cup after every few uses or when the full line is reached.

1. Turn off and unplug the vacuum from the charger.
2. Press the dust cup release button and lift the cup away from the body.
3. Hold over a trash can. Press the bottom latch to open the door, allowing debris to fall out.
4. Close the door securely until it clicks. Reattach the dust cup to the main body.

WARNING! Do not use the vacuum if the dust cup is not properly attached. Empty in a well-ventilated area.

Maintenance & Filter Care

Regular maintenance ensures optimal performance and suction power.

1. Clean the filter: Remove the filter from the dust cup every month. Rinse with cold water only. Let it air dry for at least 24 hours completely before reinstalling.
2. Check the brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors to cut and remove strands if necessary.
3. Inspect openings: Ensure the floor nozzle, hose, and pod openings are free of blockages.

CAUTION! Never use the vacuum without the dry filter installed. Do not use soap or put filter in dishwasher.

Battery & Charging

The lithium-ion battery is not user-replaceable. For longest life, follow these guidelines.

• Charge fully before first use.
• Store the vacuum on the charging dock when not in use to keep it ready.
• If storing for more than a few months, charge to about 50% and store in a cool, dry place.
• The battery indicator will flash when charge is critically low.

WARNING! Use only the provided Shark charging dock and adapter. Do not expose battery to fire or extreme heat.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to interference acceptance. Copyright © SharkNinja Operating LLC. Shark and ION are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: If unresponsive, remove from charger, hold POWER button for 10 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com