Shark ION RV760 Series Vacuum Cleaner Manual

The Shark ION RV760 Series is a versatile, cordless stick vacuum cleaner designed for whole-home cleaning. It features a lightweight, self-standing design, a removable battery, a motorized brushroll for carpets and hard floors, a large-capacity dust cup, and multiple cleaning modes. The vacuum includes a docking station for charging and storage, various attachments for above-floor cleaning, and smart sensor technology. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Using Attachments 7. Cleaning & Maintenance 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motorized brushroll, Removable Lithium-Ion Battery, Docking Station, Crevice Tool, Dusting Brush, Upholstery Tool, and Charger.

Feature	Description
Motorized Brushroll	Deep cleans carpets and agitates debris on hard floors
Removable Battery	Lithium-ion battery for cordless operation; charges on dock
Self-Standing Design	Stands upright on its own for easy storage and pause during cleaning
Large Dust Cup	Easy-empty, bagless dust cup with large capacity
Cleaning Modes	Eco and Max modes for runtime or power adjustment
Smart Sensor Technology	Indicates brushroll status and battery level
Docking Station	Charges battery and stores vacuum and tools
POWER Button	Turns vacuum on/off and cycles through cleaning modes
Brushroll Release	Lever to remove brushroll for cleaning and maintenance
Dust Cup Release	Button to detach dust cup for emptying

Assembly & Setup

Unpack and inspect all contents. Assemble the vacuum for first use.

Insert the battery: Align the battery with the slot on the back of the vacuum and slide it in until it clicks.
Attach the handle: If not pre-assembled, align the handle with the main body and secure it according to the quick-start guide.
Place the docking station: Choose a location near an outlet. Plug the charger into the dock and then into a wall outlet.
Mount the vacuum: Place the vacuum onto the docking station to begin charging the battery.
Attach tools: Store the crevice tool, dusting brush, and upholstery tool on the dock or as preferred.

WARNING! Ensure the vacuum is turned off and the battery is correctly installed before first use. Keep the charger away from water.

First-Time Use

Fully charge the battery before first use. The indicator light on the dock will show charging status.

Charge: Place the vacuum on the dock. A full charge may take up to 3.5 hours.
Power On: Press the POWER button on the handle to turn on the vacuum in Eco mode.
Select Mode: Press the POWER button again to switch to Max mode for increased suction (reduces runtime).
Begin Cleaning: Push the vacuum forward on floors. The motorized brushroll will activate automatically.
Use Attachments: To clean above floors, detach the wand by pressing the release button and attach the desired tool.

CAUTION! Do not use on wet surfaces or to pick up liquids, large objects, or hot ashes.

Specifications

Model Series: Shark ION RV760 Series.
Type: Cordless Stick Vacuum.
Power Source: Removable Lithium-Ion Battery.
Charging Time: Approx. 3.5 hours for a full charge.
Run Time: Up to 40 minutes in Eco mode; up to 20 minutes in Max mode (varies with use).
Dust Cup Capacity: 0.5 dry quarts.
Filtration: Washable foam and felt filter.

Attachments Included: Crevice Tool, Dusting Brush, Upholstery Tool.

Weight: Approximately 7.5 lbs.

Input: Charger: 120V AC, 60Hz.

Controls and Modes

Main controls are located on the handle. Status indicators are on the vacuum body.

Power/Mode Button: Press once to turn on in Eco mode (standard cleaning). Press again to switch to Max mode (high power for deep cleaning). Press a third time to turn the vacuum off.

Brushroll Indicator Light: A light on the vacuum body will flash if the brushroll becomes clogged or obstructed. Turn off the vacuum and clear the blockage.

Battery Indicator Lights: Lights on the vacuum or dock show charging status and approximate battery level.

Wand Release Button: Press to detach the wand for above-floor cleaning.

Dust Cup Release Button: Press to remove the dust cup for emptying.

Using Attachments

For cleaning upholstery, stairs, ceilings, and tight spaces.

Turn off the vacuum.

Press the wand release button and detach the main vacuum body from the floor nozzle.

Attach the desired tool (Crevice Tool, Dusting Brush, or Upholstery Tool) directly to the handle or the end of the wand.

Turn the vacuum back on to use the attachment. Suction is provided, but the motorized brushroll is not active in this configuration.

When finished, turn off the vacuum, detach the tool, and reattach the floor nozzle until it clicks into place.

Tip: The dusting brush is ideal for delicate surfaces and fan blades. The crevice tool is perfect for corners and between cushions.

Cleaning & Maintenance

Regular maintenance ensures optimal performance and longevity.

Empty the Dust Cup: Press the release button, remove the dust cup, and hold it over a trash can. Open the bottom lid to empty. Close the lid and reattach.

Clean the Filter: Remove the foam and felt filter from the dust cup compartment. Rinse with cold water only. Let it air dry completely for at least 24 hours before reinstalling.

Clear Brushroll Blockages: Turn off and unplug the vacuum. Flip it over and press the brushroll release levers. Remove the brushroll and clear any hair, strings, or debris. Reinstall the brushroll and ensure it spins freely.

Check for Clogs: If suction is weak, check the dust cup, hose, wand, and nozzle for blockages.

WARNING! Do not use the vacuum without the filter installed. Do not immerse the main body, battery, or charger in water.

Battery & Charging

The removable battery charges on the docking station.

For best results, charge the battery fully before first use and after each use.

Store the vacuum on the docking station when not in use to keep the battery charged.

If the vacuum will not be used for an extended period, remove the battery and store it separately in a cool, dry place.

The battery is not user-serviceable. Do not attempt to open or repair it.

Battery runtime decreases over time with normal use. Replacement batteries are available from Shark.

CAUTION! Use only the charger provided. Do not expose the battery to fire, extreme heat, or puncture it.

Care & Storage

Store the vacuum on its docking station in a dry, indoor area. Keep tools stored on the dock.

Clean the exterior with a dry or slightly damp cloth. Do not use abrasive cleaners.

CAUTION! Do not store the vacuum or battery in direct sunlight, near heaters, or in temperatures below 40°F or above 104°F.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, ION, and associated designs are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Vacuum won't turn on Battery not charged/installed Place on dock to charge; ensure battery is fully inserted and clicked into place.

Weak suction or no suction Full dust cup, clog, or dirty filter Empty dust cup; check hose, wand, and nozzle for blockages; clean and dry the filter.

Brushroll not spinning Obstruction or overload Turn off vacuum, clear hair/debris from brushroll; ensure it is reinstalled correctly.

Battery not charging Faulty connection or charger Ensure vacuum is properly seated on dock; check that outlet is working; try a different outlet.

Vacuum turns off during use Battery depleted or overheating Recharge the battery; if in Max mode, switch to Eco mode for longer runtime. Allow unit to cool if overheated.

Unusual noise Foreign object in brushroll or airway Turn off immediately. Inspect brushroll, hose, and dust cup for obstructions and remove them.

Reset: If the vacuum behaves unexpectedly, remove the battery for 60 seconds, then reinstall it.

Service: For issues not resolved above, contact Shark Customer Service at 1-800-798-7398 or visit sharkclean.com.

Shark ION RV760 Series Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery not charged/installed	Place on dock to charge; ensure battery is fully inserted and clicked into place.
Weak suction or no suction	Full dust cup, clog, or dirty filter	Empty dust cup; check hose, wand, and nozzle for blockages; clean and dry the filter.
Brushroll not spinning	Obstruction or overload	Turn off vacuum, clear hair/debris from brushroll; ensure it is reinstalled correctly.
Battery not charging	Faulty connection or charger	Ensure vacuum is properly seated on dock; check that outlet is working; try a different outlet.
Vacuum turns off during use	Battery depleted or overheating	Recharge the battery; if in Max mode, switch to Eco mode for longer runtime. Allow unit to cool if overheated.
Unusual noise	Foreign object in brushroll or airway	Turn off immediately. Inspect brushroll, hose, and dust cup for obstructions and remove them.