Shark ION RV750C Vacuum Cleaner Manual

The Shark ION RV750C is a versatile, cordless stick vacuum cleaner featuring powerful suction, a rechargeable lithium-ion battery, multi-surface cleaning capabilities, a detachable handheld pod, LED headlights, a large dust cup with easy-empty mechanism, and various attachments for above-floor cleaning. It is designed for quick cleanups and whole-home cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Detachable handheld pod, Charging dock, Rechargeable battery, LED headlights on nozzle, Large capacity dust cup, Crevice tool, Upholstery tool, Multi-surface brush roll.

Assembly & Setup

Unpack all components and inspect for damage.

1. Insert the battery: Align and slide the battery into the main vacuum body until it clicks.
2. Attach the floor nozzle: Connect the nozzle to the vacuum tube until it locks securely.
3. Mount the charging dock: Use included screws to mount the dock on a wall near an outlet.
4. Place the vacuum on the dock: Ensure charging contacts align; the vacuum will charge automatically.

WARNING! Ensure the vacuum is turned off and the battery is properly installed before first use. Keep hands clear of moving parts.

First-Time Use

Fully charge the vacuum before initial use.

1. Charge: Place the vacuum on the charging dock; the indicator will light. A full charge takes approximately 3.5 hours.
2. Power on: Press the power button on the handle; the vacuum will start at the default suction setting.
3. Select mode: Use the mode button to switch between standard and max suction as needed.
4. Begin cleaning: Push the vacuum forward and back over surfaces; the brush roll will adjust automatically.

CAUTION! Do not use on wet surfaces or to pick up liquids, large objects, or hot ashes.

Specifications

• Model: Shark ION RV750C.
• Type: Cordless stick vacuum with detachable handheld.
• Battery: Rechargeable lithium-ion, 22.2V.
• Run Time: Up to 40 minutes on standard mode; up to 20 minutes on max mode.
• Charging Time: Approximately 3.5 hours for a full charge.
• Dust Cup Capacity: 0.5 dry quarts.
• Weight: 7.5 lbs (with battery).
• Attachments: Crevice tool, upholstery tool, charging dock.
• Warranty: 5-year limited warranty (see manual for details).

Controls and Indicators

Main Handle: POWER button (press to turn on/off), MODE button (toggle between standard and max suction).

Indicators: Battery LED lights (show charge level: green = high, amber = medium, red = low/flashing = charge needed).

Detaching Handheld: Press the release button near the pod to separate from the stick. Attachments: Press the release button on the handheld to remove the floor nozzle; attach tools directly to the handheld's suction port. Charging: Place vacuum on dock; a steady green light indicates full charge.

Cleaning Modes & Attachments

Use the floor nozzle for carpets and hard floors. For above-floor cleaning, detach the handheld pod.

1. Turn off the vacuum before changing attachments.
2. For floors: Use the floor nozzle; the brush roll adjusts automatically.
3. For crevices: Attach the crevice tool to the handheld pod for tight spaces.
4. For upholstery: Attach the upholstery tool to clean sofas, chairs, and stairs.
5. Select suction mode: Use standard for everyday cleaning; max for deep cleaning or high-pile carpets.

Tip: Regularly check the brush roll for hair or debris wraps and clean as needed.

Emptying the Dust Cup

Empty the dust cup when it reaches the MAX fill line or after each use.

1. Turn off and disconnect the vacuum from power.
2. Press the dust cup release button and remove the cup from the vacuum body.
3. Hold the cup over a trash bin; press the bottom latch to open the door and empty contents.
4. Close the door securely and reattach the dust cup until it clicks.
5. For thorough cleaning: Rinse the dust cup with water (if needed) and let it dry completely before reuse.

WARNING! Do not use the vacuum without the dust cup properly installed. Ensure the dust cup is completely dry before reattaching.

Battery & Charging

The lithium-ion battery is not user-replaceable; contact Shark for service.

Charging: Use only the provided charging dock. Store the vacuum on the dock when not in use to maintain charge. Battery Care: Avoid extreme temperatures; do not leave the vacuum on the charger continuously for extended periods. If the battery indicator flashes red, charge immediately. For long storage, charge fully and store in a cool, dry place.

Care & Maintenance

Regular maintenance ensures optimal performance.

• Clean the filter: Remove and tap the foam filter over a trash bin monthly; rinse with water every 3 months and let dry for 24 hours.
• Clear brush roll: Turn off vacuum; use scissors to cut away hair or strings wrapped around the roll.
• Check for blockages: Inspect the floor nozzle, tube, and dust cup if suction decreases.
• Wipe exterior: Use a dry cloth; do not use liquids or abrasive cleaners.

CAUTION! Always turn off and remove from charger before performing maintenance. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and SharkNinja are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: If unresponsive, remove from charger, hold power button for 10 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com