Shark ION RV700 NC Series Vacuum Cleaner Manual

The Shark ION RV700 NC Series is a versatile robot vacuum cleaner featuring Wi-Fi connectivity, smart home integration, multi-surface cleaning with brush rolls, a self-cleaning brushroll, HEPA filtration, voice control compatibility, and a self-emptying base. It offers multiple cleaning modes, scheduling, and zone cleaning via the SharkClean app. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging Dock, Side Brushes, Filter, Remote Control, Power Adapter.

Feature	Description
Self-Empty Base	Automatically empties dustbin into base after cleaning
Wi-Fi Connectivity	Connects to SharkClean app for remote control
HEPA Filtration	Captures 99.97% of dust and allergens
Multi-Surface Brushroll	Cleans carpets and hard floors
Voice Control	Works with Alexa and Google Assistant
Boundary Strips	Set no-go zones for the robot
Auto-Recharge & Resume	Returns to dock to recharge and resumes cleaning
Spot Clean	Intensively cleans a concentrated area
Max Mode	Maximum suction for deep cleaning
Quiet Mode	Reduced noise for quiet operation

Installation & Setup

Unpack and inspect all contents. Place on stable, level surface.

Charge the robot: Place robot on charging dock; ensure power is connected.
Install side brushes: Attach to bottom of robot until they click into place.
Set up Self-Empty Base: Place base against wall, plug into outlet, ensure clear space around it.
Install filter: Insert HEPA filter into dustbin.
Power on: Press POWER button on robot or dock.

WARNING! Keep hair, loose clothing, fingers, and feet away from brushrolls and openings. Do not use on wet surfaces.

First-Time Use

Fully charge before first use (approx. 4 hours).

Clear floor area: Remove cords, small objects, and obstacles.
Start cleaning: Press CLEAN on robot or use remote/app.
Map your home: Let robot complete full cleaning cycle to create map.
Set up app: Download SharkClean app, create account, connect robot to Wi-Fi.
Schedule cleaning: Use app to set daily/weekly cleaning schedules.

CAUTION! Do not pick up or move robot while cleaning. Ensure cliff sensors are clean.

Specifications

Model: Shark ION RV700 NC Series.
Suction Power: Adjustable (Eco, Normal, Max).
Battery: Lithium-ion, up to 90 minutes runtime.
Dustbin Capacity: 0.2 gallons (robot), 1.0 gallons (base).
Filtration: HEPA filter, washable.
Connectivity: 2.4 GHz Wi-Fi, Bluetooth.
Compatibility: Amazon Alexa, Google Assistant.
Cleaning Modes: Auto, Spot, Max, Quiet, Edge.
Power Source: 120V AC, 60Hz.
Weight: 8.6 lbs (robot).

Controls and Settings

Access controls via robot buttons, remote, or SharkClean app. Robot Buttons: POWER, CLEAN, SPOT, DOCK.

Remote: POWER, CLEAN, SPOT, DOCK, MAX, QUIET, ECO, DIRECTIONAL ARROWS.

App Settings: Cleaning schedules, zone cleaning, cleaning history, suction power, notifications. Robot Settings: Reset Wi-Fi (hold DOCK + SPOT for 10 seconds), factory reset. Voice Control: Enable via app, use commands with Alexa/Google Assistant.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Download SharkClean app from App Store or Google Play.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot until Wi-Fi light flashes.
Follow in-app instructions to connect robot to your network.
Name your robot and set preferences.

Tip: Ensure robot is near router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for different needs.

Auto Mode: Robot intelligently cleans entire floor area.
Spot Mode: Cleans a 3x3 foot area intensively.
Max Mode: Maximum suction for deep cleaning.
Quiet Mode: Reduced noise for quiet operation.
Edge Mode: Focuses on cleaning along walls and edges.
Scheduling: Set daily or weekly cleaning via app.
Zone Cleaning: Select specific rooms or areas to clean via app.
Voice Commands: "Alexa, tell Shark to start cleaning."

WARNING! Do not use on dark carpets or black floors as cliff sensors may misread surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dustbin: After each cleaning cycle or when full.
Clean filter: Rinse HEPA filter every month, air dry completely.
Clear brushroll: Remove hair and debris weekly.
Wipe sensors: Clean cliff and bumper sensors with dry cloth.
Check side brushes: Remove tangled hair, replace if worn.
Clean charging contacts: On robot and dock with dry cloth.

CAUTION! Unplug before maintenance. Do not use damaged parts. Allow filter to dry 24 hours before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398. This device complies with Industry Canada license-exempt RSS standard(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dock not powered/contacts dirty	Ensure dock is plugged in; clean charging contacts on robot and dock.
Robot not connecting to Wi-Fi	Network issues/incorrect setup	Ensure 2.4 GHz network; restart robot and router; redo setup in app.
Poor cleaning performance	Full dustbin/dirty filter	Empty dustbin; clean filter; clear brushroll of debris.
Robot getting stuck	Obstacles/cluttered floor	Clear floor of cords and small objects; use boundary strips.
Error beeps/lights	Brushroll jammed/wheels stuck	Turn off robot, clear jam, restart.

Reset: Hold DOCK and SPOT buttons for 10 seconds to reset Wi-Fi.

Service: 1-800-798-7398; sharkclean.com