Shark ION Rocket IR70 Series Vacuum Cleaner Manual

The Shark ION Rocket IR70 Series is a cordless, lightweight stick vacuum with powerful suction, a detachable pod for handheld cleaning, a multi-surface brushroll, LED headlights, and a rechargeable lithium-ion battery. It features multiple cleaning modes, a large dust cup, washable filters, and a wall-mount docking station for convenient storage and charging. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Vacuum 7. Maintenance & Cleaning 8. Battery & Charging 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Detachable handheld pod, Multi-surface brushroll, LED headlights, Rechargeable battery, Wall-mount docking station, Charger, Crevice tool, Dusting brush.

Feature	Description
Power Button	Turns vacuum on/off; toggles between cleaning modes
Battery Indicator	LED lights show remaining battery charge
Detach Button	Releases handheld pod from stick
Dust Cup Release	Opens dust cup for emptying
Brushroll On/Off	Switch to enable/disable brushroll for different surfaces
Charging Port	For connecting charger directly to vacuum
Wall Dock Mount	For storage and charging when mounted on wall
LED Headlights	Illuminates dark areas under furniture
Washable Filters	Foam and felt filters for maintaining suction
Multi-Surface Brushroll	Cleans carpets and hard floors

Assembly & Installation

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert the handle into the main body until it clicks into place.
Install the brushroll: Slide the brushroll into the cleaner head and secure the end caps.
Mount the docking station: Use included screws to mount the dock on a wall near an outlet.
Charge the vacuum: Place vacuum on dock or connect charger directly to charging port.

WARNING! Ensure vacuum is turned off and not charging during assembly. Keep fingers away from brushroll during installation.

First-Time Setup

Fully charge the vacuum before first use.

Charge: Place vacuum on dock or plug charger into vacuum and outlet. Charge until battery indicator shows full (approx. 4 hours).
Install filters: Ensure both foam and felt filters are correctly placed in dust cup.
Test operation: Press power button to turn on. Test on a small area to familiarize yourself with controls.
Adjust settings: Use brushroll on/off switch for carpets (ON) or hard floors (OFF).

CAUTION! Do not use vacuum without filters installed. Ensure docking station is securely mounted.

Specifications

Model: Shark ION Rocket IR70 Series.
Type: Cordless stick vacuum with detachable handheld.
Battery: Rechargeable lithium-ion, 22.2V.
Run Time: Up to 40 minutes on standard mode.
Charging Time: Approximately 4 hours for full charge.
Dust Cup Capacity: 0.4 dry quarts.
Filters: Washable foam and felt filters.
Weight: 7.5 lbs (with battery).
Attachments: Crevice tool, dusting brush.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power button (press once for standard mode, twice for max mode), Battery indicator LEDs (3 lights for charge level).

Body: Detach button (to release handheld pod), Dust cup release button, Brushroll on/off switch (located on cleaner head).

Cleaning Modes: Standard (balanced cleaning), Max (maximum suction for deep cleaning). Battery Indicator: Green LEDs show charge level (3=full, 2=medium, 1=low, flashing=needs charge).

Using the Vacuum

For floor cleaning: Use as stick vacuum. For above-floor cleaning: Detach handheld pod and use with attachments.

Turn on: Press power button. Select mode with additional presses.
Adjust brushroll: For carpets, ensure brushroll is ON. For hard floors, turn OFF to prevent scattering debris.
Empty dust cup: Press release button, remove cup, and empty into trash. Reinstall securely.
Use attachments: For crevices or dusting, attach tool to handheld pod nozzle.
Detach handheld: Press detach button to separate pod for portable cleaning.

Tip: Use LED headlights to see dust and debris under furniture. Empty dust cup when full to maintain suction.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Clean filters monthly: Rinse foam and felt filters under water, air dry completely for 24 hours before reinstalling.
Clear brushroll: Remove hair and debris from brushroll regularly. Use scissors to cut tangled fibers if needed.
Check for blockages: Inspect hose, nozzle, and dust cup path if suction decreases.
Wipe exterior: Use dry cloth to clean vacuum body.

WARNING! Do not use vacuum without filters. Ensure all parts are completely dry before reassembly.

Battery & Charging

Use only provided charger and docking station.

Charging: Place vacuum on dock or connect charger to port. Battery indicator will flash while charging.
Storage: Store vacuum on dock to keep it charged and ready.
Battery care: Avoid complete discharge. Charge after each use for best battery life.
Replacement: Battery is not user-replaceable. Contact Shark Customer Service for battery issues.

CAUTION! Do not expose battery to extreme temperatures. Do not use damaged charger or battery.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery disposal: Dispose of battery according to local regulations; do not incinerate.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery dead/not charged	Charge vacuum fully. Ensure charger is properly connected.
Reduced suction	Full dust cup/clogged filters	Empty dust cup. Clean filters. Check for blockages in hose or nozzle.
Brushroll not spinning	Brushroll off/tangled	Ensure brushroll switch is ON. Clear hair and debris from brushroll.
Battery not charging	Faulty connection/dock issue	Ensure vacuum is properly seated on dock. Try direct charger connection. Check outlet.
Vacuum turns off during use	Overheating/battery protection	Allow vacuum to cool for 45 minutes. Check for blockages causing motor strain.

Reset: Turn off vacuum, remove from charger, wait 10 seconds, then restart.

Service: 1-800-798-7398; sharkclean.com