Shark ION Rocket IR100 Series Vacuum Cleaner Manual

The Shark ION Rocket IR100 Series is a cordless, lightweight stick vacuum with powerful suction, a self-cleaning brushroll, a removable pod for handheld cleaning, and a rechargeable lithium-ion battery. It features multiple cleaning modes, a large dust cup, LED headlights, and compatibility with various Shark accessories. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Using Accessories 7. Cleaning & Maintenance 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Cordless stick vacuum body, Removable handheld pod, Self-cleaning brushroll, LED headlights, Dust cup with one-touch empty, Charging dock, Wall mount, Crevice tool, Dusting brush.

FeatureDescription
Powerful SuctionProvides strong pickup on carpets and hard floors
Self-Cleaning BrushrollReduces hair wrap for maintenance-free cleaning
Removable PodConverts to a handheld vacuum for above-floor cleaning
LED HeadlightsIlluminates hidden debris under furniture
Cordless DesignRechargeable lithium-ion battery for up to 30 minutes runtime
Large Dust Cup0.5-quart capacity with easy-empty mechanism
Multi-Surface CleaningAdjustable settings for carpets and hard floors
LightweightEasy to carry and maneuver around the home
Charging DockConvenient storage and charging station
Accessory StorageWall mount holds tools when not in use

Assembly & Setup

Unpack and inspect all contents. Ensure all parts are present.

  1. Attach the handle: Insert the handle into the main body until it clicks into place.
  2. Install the brushroll: Ensure it is properly seated and rotates freely.
  3. Attach accessories: Click the crevice tool or dusting brush into the accessory holder.
  4. Mount the charging dock: Use screws (included) to secure to wall near an outlet.
  5. Charge the vacuum: Place vacuum on dock; charge fully before first use (approx. 4 hours).

WARNING! Do not use if any parts are damaged. Keep battery away from heat sources.

First-Time Use

Fully charge the vacuum before initial operation.

  1. Power on: Press the power button on the handle.
  2. Select cleaning mode: Use the mode button to switch between Eco (long runtime) and Max (maximum suction).
  3. Begin cleaning: Glide over floors; the brushroll will automatically adjust.
  4. Empty dust cup: Press the release button and hold over trash bin to empty.
  5. Convert to handheld: Press the release button to detach the pod for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Controls and Modes

Power Button: Turns vacuum on/off. Mode Button: Toggles between Eco (standard) and Max (high power). Brushroll Indicator: LED shows brushroll status. Battery Indicator: Shows remaining charge.

Cleaning Modes: Eco for extended cleaning on hard floors/low-pile carpets; Max for deep cleaning on high-pile carpets or concentrated messes.

Handheld Conversion: Press release button to detach pod; attach accessories directly to pod nozzle.

Using Accessories

Crevice Tool: For tight spaces, corners, between cushions. Dusting Brush: For delicate surfaces, shelves, blinds.

  1. Ensure vacuum is off before attaching accessories.
  2. Insert accessory into nozzle or handheld pod until it clicks.
  3. Select appropriate mode (Max for deep crevices).
  4. Clean accessory after use; remove debris from bristles.

Tip: Store accessories on wall mount to keep them organized.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use: Press release button, empty into trash.
  2. Clean brushroll: Remove any tangled hair or fibers; check for blockages.
  3. Wash filters: Remove foam and felt filters monthly; rinse with water, air dry completely before reinstalling.
  4. Check for blockages: Inspect hose, nozzle, and dust cup path if suction decreases.
  5. Wipe exterior: Use a dry cloth to clean vacuum body.

WARNING! Do not use vacuum without filters installed. Ensure all parts are dry before reassembly.

Battery & Charging

Use only the provided charging dock. Battery life may vary with usage and age.

CAUTION! Do not attempt to disassemble or replace battery yourself.

Care & Storage

Store vacuum in a cool, dry place. Use wall mount to save floor space.

CAUTION! Do not store with a wet filter or in damp areas. Keep away from children and pets.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery depleted/not seatedCharge on dock for 4 hours; ensure battery is properly connected.
Reduced suctionFull dust cup/blockage/dirty filterEmpty dust cup; check for blockages in nozzle/hose; clean or replace filters.
Brushroll not spinningHair/debris wrapped around brushrollTurn off vacuum; remove brushroll and clear any obstructions.
Battery not chargingFaulty dock/power outletCheck power outlet; ensure vacuum is properly seated on dock; try different outlet.
Vacuum turns off during useOverheating/blockageAllow to cool for 45 minutes; check for blockages; clean filters.
Accessories not staying attachedWorn or damaged connectorEnsure accessory is fully inserted; contact customer service if damaged.

Reset: Turn off, remove battery for 30 seconds, reinsert, and charge fully.

Service: 1-800-798-7398; www.sharkclean.com

Shark ION Rocket IR100 Series Vacuum Cleaner Manual © - All Rights Reserved 2025