Shark ION ROBOT RV750CA Vacuum Cleaner Manual

The Shark ION ROBOT RV750CA is a Wi-Fi connected robotic vacuum cleaner with smart home integration, multi-surface cleaning capabilities, self-charging docking station, dual spinning side brushes, and high-efficiency filter. It features app control, voice command compatibility (Alexa/Google Assistant), scheduling, spot cleaning, and edge cleaning modes. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Configuration 4. Technical Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi and App 7. Cleaning Modes and Operation 8. Maintenance and Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic vacuum unit, Self-Charging Home Base, Power adapter, Dual side brushes, High-efficiency filter, Remote control (if included), Extra filter.

Feature	Description
Wi-Fi Connectivity	Enables app control and smart home integration
Self-Charging Home Base	Automatically returns to dock when battery is low
Multi-Surface Cleaning	Automatically adjusts suction for carpets and hard floors
Dual Spinning Side Brushes	Captures debris from edges and corners
High-Efficiency Filter	Traps dust and allergens
Voice Control	Works with Amazon Alexa and Google Assistant
Spot Cleaning Mode	Concentrates cleaning on a specific area
Edge Cleaning Mode	Focuses on cleaning along walls and edges
Scheduling	Set daily or weekly cleaning schedules via app
Cliff Sensors	Prevents falls from stairs and ledges

Unpacking and Setup

Unpack and inspect all contents. Place Home Base on a level surface against a wall.

Charge the robot: Place robot on Home Base, connect power adapter, and charge fully (approx. 4 hours).
Prepare cleaning area: Remove loose wires, small objects, and clutter from floor.
Install side brushes: Attach dual side brushes to bottom of robot (snap into place).
Install filter: Insert high-efficiency filter into dustbin compartment.

WARNING! Keep robot away from water and wet surfaces. Ensure Home Base is placed in an open area free of obstacles.

First-Time Configuration

Power on robot; follow app prompts for setup.

Download SharkClean app: Available on iOS App Store and Google Play Store.
Create account: Register or log in to your Shark account.
Connect to Wi-Fi: Follow in-app instructions to connect robot to your 2.4GHz Wi-Fi network.
Name your robot: Assign a unique name for voice control identification.
Set up voice control: Enable skill in Alexa or Google Home app and link your Shark account.

CAUTION! Ensure robot is fully charged before first use. Keep firmware updated via app.

Technical Specifications

Model: Shark ION ROBOT RV750CA.
Battery Type: Lithium-ion.
Run Time: Up to 90 minutes per charge.
Charging Time: Approximately 4 hours.
Dustbin Capacity: 0.4 liters.
Filter Type: High-efficiency filter (washable).
Wi-Fi Frequency: 2.4GHz only.
Compatibility: iOS 10.0+ and Android 5.0+.
Voice Control: Amazon Alexa, Google Assistant.
Power Source: 100-240V AC, 50/60Hz.
Operating Temperature: 32°F to 104°F (0°C to 40°C).

Controls and Indicators

Access controls via physical buttons, remote (if included), or SharkClean app.

Robot Top Panel: CLEAN (power/start), SPOT, DOCK (return to Home Base), Wi-Fi indicator light.

Indicator Lights: Solid blue (connected/running), Flashing blue (connecting/error), Solid red (charging), Off (charged/off).

App Controls: Start/Stop, Schedule, Mode selection (Auto, Spot, Edge), Suction power adjustment, Cleaning history.

Voice Commands: "Alexa, ask Shark to start cleaning," "Hey Google, tell Shark to dock."

Connecting to Wi-Fi and App

Ensure robot is powered on and near your Wi-Fi router during setup.

Open SharkClean app and tap "Add a Robot."
Select "RV750 Series" from list.
Press and hold CLEAN and DOCK buttons on robot until Wi-Fi light flashes blue.
Follow in-app prompts to connect to your 2.4GHz network.
Once connected, indicator will turn solid blue.

Tip: If connection fails, restart robot and router, ensure correct Wi-Fi password.

Cleaning Modes and Operation

Supports multiple cleaning modes for different needs.

Auto Mode: Default mode; robot cleans entire area in efficient pattern.
Spot Mode: Press SPOT button; robot spirals outward to clean concentrated area (approx. 3ft diameter).
Edge Mode: Robot follows walls and edges to clean baseboards.
Manual Control: Use directional arrows in app to drive robot manually.
Scheduling: Set daily or weekly cleaning times in app.
Pause/Resume: Press CLEAN button or use app to pause and resume cleaning.
Docking: Press DOCK button or use voice command to send robot to Home Base.

WARNING! Do not pick up or move robot while in operation. Keep pets and children away during cleaning cycles.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty dustbin after each cleaning cycle.
Clean filter weekly: Tap out debris, rinse under cold water, air dry 24 hours before reinstalling.
Remove and clean side brushes monthly; check for tangled hair or debris.
Clean sensors and charging contacts on robot and Home Base with dry cloth.
Check main brush roll for obstructions; remove hair or strings as needed.
Inspect wheels for debris; clean if necessary.

CAUTION! Do not use robot on wet surfaces. Always turn off and unplug before maintenance.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on Home Base to charge; ensure power adapter connected.
Wi-Fi connection issues	Router distance/password	Move robot closer to router; re-enter correct Wi-Fi password in app.
Robot not docking	Obstacles/ dirty sensors	Clear path to Home Base; clean sensors on robot and dock.
Poor cleaning performance	Full dustbin/dirty filter	Empty dustbin; clean or replace filter; check brush roll for obstructions.
Error beeps/lights	Stuck brush/wheel	Turn off robot; remove debris from brush roll and wheels; restart.
Voice commands not working	App not linked	Re-link Shark skill in Alexa/Google Home app; check robot online status.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to reset Wi-Fi settings.

Service: 1-800-798-7398; sharkclean.com/support