The Shark ION ROBOT RV700 Series is a smart robotic vacuum cleaner featuring Wi-Fi connectivity, app control, voice command compatibility (Alexa/Google Assistant), multi-surface cleaning with dual brushes, self-emptying base, smart sensor navigation, scheduling, spot cleaning, and edge cleaning modes. Powered by a rechargeable lithium-ion battery with auto-docking and recharge. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Robot vacuum, Self-Emptying Base, Charging Dock, Dual Side Brushes, Filter, Remote Control, Power Adapter.
| Feature | Description |
|---|---|
| Self-Emptying Base | Automatically empties robot dustbin into base bag |
| Wi-Fi Connectivity | Connects to SharkClean app for remote control |
| Voice Control | Works with Amazon Alexa and Google Assistant |
| Smart Sensor Navigation | Avoids obstacles and drops with sensors |
| Dual Multi-Surface Brushes | Cleans carpets and hard floors |
| Recharge & Resume | Auto-docks, recharges, and resumes cleaning |
| Spot Cleaning | Intensive clean in a concentrated area |
| Edge Cleaning | Focuses on cleaning along walls and edges |
| Schedule Cleaning | Set daily or weekly cleaning schedules |
| Filter Indicator | Alerts when filter needs cleaning/replacement |
Unpack and inspect all components. Place base on level surface.
WARNING! Keep base and robot away from stairs, heat sources, and water. Ensure proper ventilation around base.
Fully charge robot (approx. 4 hours).
CAUTION! Do not pick up or move robot during cleaning cycle. Allow it to return to base automatically.
Robot Buttons: CLEAN (start/pause), DOCK (return to base), SPOT (spot clean). Remote: CLEAN, DOCK, SPOT, EDGE, SCHEDULE, directional arrows.
App Controls: Start/Pause, Docking, Spot Clean, Edge Clean, Schedule, Cleaning History, Notifications.
Settings: Cleaning Mode (Auto/Spot/Edge), Suction Power (Eco/Normal/Max), Schedule (Daily/Weekly times), Do Not Disturb (quiet hours), Filter Reset, Wi-Fi Setup, Voice Assistant Link.
Requires 2.4GHz Wi-Fi network and SharkClean app.
Tip: Ensure robot is near router during setup. Disable VPN if connection fails.
Supports multiple cleaning modes for customized cleaning.
WARNING! Do not use on wet surfaces. Pick up loose cords and small objects to avoid entanglement.
Regular maintenance ensures optimal performance.
CAUTION! Do not use robot or base with wet filter. Unplug base before maintenance.
FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-888-228-5531. Battery: Lithium-ion; dispose of properly according to local regulations.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Robot not starting | Low battery/not docked | Place on charger; ensure charging contacts clean; wait for full charge. |
| Robot not connecting to Wi-Fi | Network issues/setup error | Ensure 2.4GHz network; restart robot and router; re-run app setup. |
| Poor cleaning performance | Full dustbin/clogged brush | Empty dustbin; clean filter; remove debris from brushes. |
| Robot getting stuck | Obstacles/cluttered floor | Clear floor of cords, small objects; use boundary strips if needed. |
| Base not emptying robot | Full bag/clog | Replace base bag; check hose for clogs; ensure robot is properly seated. |
| Error lights flashing | Various faults | Refer to manual error code chart; reset robot (hold CLEAN + DOCK 10 sec). |
Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.
Service: 1-888-228-5531; sharkclean.com/support