Shark ICZ160EUT Vacuum Cleaner Manual

The Shark ICZ160EUT is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister mode for above-floor cleaning, an Anti-Allergen Complete Seal with HEPA filter, a motorized brushroll for carpets, a wide upholstery tool, and a crevice tool. It is designed for deep cleaning on multiple surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with handle, Dust Cup, Motorized Brushroll, Lift-Away canister, Hose, Wide Upholstery Tool, Crevice Tool, HEPA Filter.

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

1. Attach handle: Align handle with body and push until it clicks into place.
2. Install hose: Connect hose to the designated port on the vacuum body.
3. Attach tools: Store tools on the onboard caddy or connect as needed.
4. Install filter: Place HEPA filter into the filter compartment.
5. Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; ensure area is clear of large debris.

1. Select mode: Choose upright or Lift-Away mode based on cleaning needs.
2. Adjust settings: Use brushroll on/off switch for floor type.
3. Begin vacuuming: Move vacuum slowly back and forth for effective cleaning.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum wet surfaces or large objects. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark ICZ160EUT.
• Type: Upright with Lift-Away canister.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Motorized brushroll, wide upholstery tool, crevice tool.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.2 dry quarts.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brushroll on/off. Body: Lift-Away release, dust cup release, hose port.

Settings: Upright mode for floors; Lift-Away mode for stairs and furniture. Brushroll on for carpets; off for hard floors. Suction power is automatic.

Maintenance indicators: Check filter light (if equipped). Cord wrap for storage.

Using Attachments

Attach tools to hose for above-floor cleaning.

1. Detach hose: Press release button and pull hose from body.
2. Connect tool: Insert tool end into hose until secure.
3. Select tool: Use wide upholstery tool for furniture; crevice tool for edges.
4. Clean: Move tool slowly over surface.
5. Return to storage: Reattach tools to caddy after use.

Tip: Ensure vacuum is on and hose is securely connected before use.

Lift-Away Mode

Enables portable cleaning for stairs, furniture, and tight spaces.

1. Activate: Press Lift-Away release button on body.
2. Lift canister: Detach canister from upright base.
3. Use hose: Extend hose and attach desired tool.
4. Clean: Carry canister to area; vacuum as needed.
5. Return: Place canister back onto base until it clicks.

WARNING! Do not pull hose excessively. Ensure canister is securely attached before using upright mode.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release; empty after each use.
2. Clean filter: Rinse HEPA filter under cold water every month; air dry 24 hours.
3. Clear brushroll: Remove hair and debris from brushroll regularly.
4. Check hose: Remove clogs if suction decreases.
5. Inspect cord: Ensure cord is not damaged.

CAUTION! Unplug before maintenance. Do not use damaged cord or filter.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com