Shark ICZ160EU Series Vacuum Cleaner Manual

The Shark ICZ160EU Series is a versatile cordless stick vacuum cleaner featuring powerful suction, a removable battery, multiple cleaning modes, LED headlights, a motorized brushroll for carpets and hard floors, a large dust cup with easy-empty system, washable filters, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Attachments & Accessories 7. Cleaning Operations 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Removable Lithium-ion Battery, Charging Dock, Motorized Brushroll, LED Headlights, Dust Cup with Release Button, Washable Foam and Felt Filters, Crevice Tool, Upholstery Tool, Dusting Brush.

FeatureDescription
Power ButtonTurns vacuum on/off; press to cycle through power modes
Battery Release ButtonReleases battery for charging or replacement
Dust Cup ReleaseButton to detach dust cup for emptying
Brushroll On/Off SwitchActivates/deactivates motorized brushroll
LED HeadlightsIlluminates dark areas under furniture
Wand Release ButtonDetaches wand for handheld use
Charging ContactsConnects to dock for battery charging
Filter Access DoorOpens to remove foam and felt filters
Attachment HolderStores crevice tool and dusting brush on dock
Wall MountIncluded for storage on wall

Assembly & Setup

Unpack and inspect all contents. Assemble for first use.

  1. Insert Battery: Align battery with slot on vacuum body; push until it clicks.
  2. Attach Wand: Insert wand into vacuum body until it clicks securely.
  3. Attach Floor Nozzle: Connect floor nozzle to wand until it clicks.
  4. Install Charging Dock: Mount on wall using provided screws or place on stable surface.
  5. Charge Battery: Place vacuum on dock; ensure charging indicator lights up.

WARNING! Ensure vacuum is turned off during assembly. Keep hair, loose clothing, and fingers away from brushroll.

First-Time Use

Fully charge battery before first use (approx. 4 hours).

  1. Power On: Press Power Button; vacuum will start in standard mode.
  2. Select Mode: Press Power Button again to cycle through modes (Eco, Standard, Max).
  3. Begin Cleaning: Push vacuum forward on floor; LED lights will illuminate.
  4. Use Attachments: Detach wand to use crevice tool, upholstery tool, or dusting brush.
  5. Empty Dust Cup: Press release button when full; empty into trash.

CAUTION! Do not use on wet surfaces. Keep vacuum away from heat sources.

Specifications

Controls and Modes

Main controls located on vacuum body. Power Button: Turns on/off and cycles modes. Brushroll Switch: Toggles brushroll on/off for different surfaces.

Cleaning Modes: Eco (extended run time, lower suction), Standard (balanced cleaning), Max (maximum suction for deep cleaning).

Indicator Lights: Battery status (green=charged, red=low, flashing=charging). Brushroll Indicator: Shows when brushroll is active. Filter Reminder: Flashes when filter needs cleaning.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

  1. Crevice Tool: For tight spaces, corners, between cushions.
  2. Upholstery Tool: For sofas, chairs, stairs.
  3. Dusting Brush: For delicate surfaces, shelves, blinds.
  4. Motorized Brushroll: For carpets and hard floors (built into floor nozzle).

Tip: Attach tools directly to wand or handheld vacuum for above-floor cleaning.

Cleaning Operations

Optimize cleaning based on surface type.

  1. Hard Floors: Use with brushroll ON for debris pickup.
  2. Carpets: Use with brushroll ON for deep cleaning; Max mode for high-pile.
  3. Above-Floor: Detach wand; attach appropriate tool.
  4. Emptying Dust Cup: Press release button; hold over trash; close securely.
  5. Cleaning Filters: Remove and rinse every 3 months or as needed.
  6. Brushroll Maintenance: Remove hair and threads regularly; check for blockages.

WARNING! Do not vacuum sharp objects, liquids, or hot ashes. Turn off before maintenance.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty Dust Cup: After each use or when full.
  2. Clean Filters: Rinse with water every 3 months; air dry completely before reinserting.
  3. Clear Brushroll: Remove tangled hair and debris with scissors or cleaning tool.
  4. Check Blockages: Inspect wand, hose, and nozzle for obstructions.
  5. Battery Care: Store in cool, dry place; avoid complete discharge.
  6. Clean Exterior: Wipe with dry cloth; do not use chemicals.

CAUTION! Ensure vacuum is unplugged from charger and turned off before maintenance. Do not immerse in water.

Regulatory Information

CE Compliant: Meets European Union safety and environmental standards. WEEE Directive: Do not dispose with household waste; recycle appropriately. RoHS Compliant: Contains no hazardous substances above permitted levels. For support, visit www.sharkclean.eu or contact customer service at 00800 00 000 000.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not charged/deadPlace on charger; ensure contacts are clean; check indicator light.
Reduced suctionFull dust cup/clogged filterEmpty dust cup; clean filters; check for blockages in nozzle/wand.
Brushroll not spinningSwitch off/obstructionEnsure brushroll switch is ON; remove debris from brushroll ends.
Battery not chargingDirty contacts/faulty dockClean charging contacts on vacuum and dock; try different outlet.
Vacuum shuts off unexpectedlyOverheating/full dust cupAllow to cool; empty dust cup; check filter for clogs.
LED lights not workingBattery low/connection issueRecharge battery; ensure wand is properly connected.

Reset: Turn off, remove battery for 30 seconds, reinsert, and recharge.

Service: 00800 00 000 000; www.sharkclean.eu

Shark ICZ160EU Series Vacuum Cleaner Manual © - All Rights Reserved 2025