Shark HYDROVAC WD210ANZ Vacuum Cleaner Manual

The Shark HYDROVAC WD210ANZ is a versatile wet/dry vacuum cleaner designed for powerful cleaning on both hard floors and carpets. It features a self-cleaning brushroll, multi-surface cleaning modes, a large-capacity dust cup, HEPA filtration, and advanced suction technology. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Unpacking and Setup 4. Specifications 5. Controls and Indicators 6. Basic Operation 7. Wet Pickup Mode 8. Maintenance and Cleaning 9. Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motor unit, Dust cup with HEPA filter, Self-cleaning brushroll, Handle with controls, Power cord, Hose and wand assembly, Attachments (crevice tool, dusting brush).

Feature	Description
Self-cleaning brushroll	Automatically removes hair and debris during use
Wet/Dry capability	Cleans both liquid spills and dry debris
HEPA filtration	Captures 99.9% of dust and allergens
Multi-surface modes	Adjustable settings for carpets and hard floors
Large capacity dust cup	2.0L capacity for fewer emptyings
Advanced suction	Powerful motor for deep cleaning
LED indicators	Shows power status and brushroll activity
Lightweight design	Easy to carry and maneuver
Accessory storage	Built-in holder for tools on unit
Washable components	Dust cup and filters are washable

Safety Information

Read all instructions before use to prevent injury or damage.

Use only as described in manual. For household use only.
Do not use to pick up flammable or combustible liquids.
Unplug before servicing, maintenance, or attachment changes.
Do not use with damaged cord or plug. Do not handle plug with wet hands.
Keep hair, loose clothing, fingers, and body parts away from openings.

WARNING! To reduce risk of fire, electric shock, or injury: Do not leave vacuum running unattended. Do not use outdoors or on wet surfaces unless in wet pickup mode.

Unpacking and Setup

Unpack and inspect all components. Assemble before first use.

Attach handle: Align handle with unit and secure with provided screws.
Install wand: Insert wand into hose connection until it clicks.
Attach floor nozzle: Connect wand to floor nozzle.
Install filter: Place HEPA filter into dust cup, then attach dust cup to unit.
Plug into standard 120V outlet.

CAUTION! Ensure all parts are securely connected before operation.

Specifications

Model: WD210ANZ
Power: 120V, 60Hz, 12 Amps
Suction Power: Advanced cyclonic suction
Dust Cup Capacity: 2.0 liters (dry), 1.5 liters (wet)
Filtration: HEPA filter, washable
Cord Length: 25 feet
Weight: 15.4 lbs
Noise Level: ≤75 dB
Warranty: 5-year limited warranty

Controls and Indicators

Handle controls: POWER button, Surface switch (Carpet/Hard Floor), Brushroll on/off.

LED Indicators: Power (green), Brushroll active (blue), Full cup alert (red).

Power: Press to turn on/off. Surface switch: Select Carpet for deep cleaning, Hard Floor for gentle suction. Brushroll control: Turn brushroll on for carpets, off for hard floors or delicate rugs. Full cup indicator: Lights when dust cup needs emptying.

Basic Operation

For dry pickup on carpets and hard floors.

Plug in and ensure dust cup and filter are installed.
Select surface mode: Carpet or Hard Floor.
Press POWER button to start.
Move vacuum forward and back in overlapping strokes.
Empty dust cup when full indicator lights or suction decreases.

Tip: For best results, empty dust cup after each use and clean filter monthly.

Wet Pickup Mode

For liquid spills. Requires wet filter installation.

Turn off and unplug vacuum.
Remove dry filter and install wet filter (included).
Ensure dust cup is empty and dry.
Plug in and turn on. Use on wet surfaces only.
After use, empty liquid immediately and clean all parts.
Let components dry completely before storage.

WARNING! Do not use wet pickup mode on carpets. Do not vacuum large amounts of water (over 1.5L).

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove, empty into trash.
Clean filter: Remove HEPA filter, tap to remove dust, wash with cold water every month. Air dry 24 hours.
Clean brushroll: Remove nozzle, clear debris from brushroll ends.
Check hose and wand: Remove clogs with long object.
Wipe exterior: Use damp cloth; do not immerse in water.

CAUTION! Unplug before maintenance. Ensure all parts are completely dry before reassembly.

Storage

Store in cool, dry place. Wrap cord around hooks. Store attachments on unit.

CAUTION! Do not store with wet components. Ensure vacuum is completely dry.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	No power	Check outlet; ensure plug is secure; check circuit breaker.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for clogs.
Brushroll not spinning	Obstruction	Turn off, unplug, and clear debris from brushroll ends.
Overheating	Clogged filter	Clean or replace filter; let vacuum cool for 60 minutes.
Unusual noise	Foreign object	Turn off and check for objects in brushroll, hose, or wand.

Reset: Unplug for 60 minutes if unit overheats.

Service: 1-800-798-7398; sharkclean.com