Shark HYDROVAC WD201 Vacuum Cleaner Manual

The Shark HYDROVAC WD201 is a versatile wet/dry vacuum cleaner designed for both liquid spills and dry debris. It features a powerful motor, large-capacity tank, HEPA filtration system, multiple nozzle attachments, automatic shutoff, easy-empty design, and cord storage. Powered by 120V AC, 60Hz. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Wet & Dry Vacuuming 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum unit with motor, Detachable tank, Hose, Power cord, Nozzle attachments, HEPA filter, Wheels for mobility.

Feature	Description
Wet/Dry Capability	Handles both liquids and solid debris
Large Capacity Tank	Easy-to-remove tank for quick emptying
HEPA Filtration	Traps 99.9% of dust and allergens
Automatic Shutoff	Turns off when tank is full (wet mode)
Multiple Attachments	Crevis tool, floor nozzle, brush tool included
Powerful Suction	Adjustable suction control
Cord Storage	Built-in hooks for neat cord wrap
Wheels	Easy maneuverability on various surfaces
ON/OFF Switch	Simple power control
Filter Access	Easy removal for cleaning or replacement

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat, stable surface.

Attach wheels: Insert wheels into slots on base until they click into place.
Install tank: Place tank onto base, ensuring it locks securely.
Connect hose: Attach hose to vacuum port on tank, twist to lock.
Attach nozzle: Choose desired nozzle (floor, crevis, brush) and connect to hose end.
Install filter: For dry vacuuming, ensure HEPA filter is properly seated in lid.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, perform a quick test to ensure proper operation.

Select mode: Ensure correct filter is installed (dry filter for debris, no filter for liquids).
Power on: Plug in, press ON/OFF switch to start.
Test suction: Place hand over nozzle to feel suction; adjust control if available.
Empty tank: After use, unplug, detach tank, and empty contents.
Clean filter: Rinse or tap dry filter after each use to maintain suction.

CAUTION! Never use without filter for dry debris. Do not vacuum hot ashes or flammable liquids.

Specifications

Tank Capacity: 10 gallons (wet/dry).
Motor Power: 5.0 HP peak.
Filtration: HEPA filter (washable).
Cord Length: 20 feet.
Hose Length: 7 feet.
Attachments: Floor nozzle, crevis tool, brush tool.
Weight: 15 lbs (empty).
Power Source: 120V AC, 60Hz.
Noise Level: ≤75 dB.

Controls and Settings

Main unit features: ON/OFF switch, Suction control dial, Tank release latch, Cord wrap hooks.

Operation: For dry vacuuming, install HEPA filter. For wet vacuuming, remove filter. Use suction control to adjust power. Automatic shutoff activates when tank is full in wet mode.

Maintenance: Empty tank when full. Clean filter regularly. Check hose for clogs. Store in dry location.

Attachments & Accessories

Included attachments: Floor nozzle for large areas, Crevis tool for tight spaces, Brush tool for delicate surfaces.

Select appropriate attachment for task.
Push attachment onto end of hose until it clicks.
To remove, press release button (if present) and pull straight off.

Tip: Store attachments in designated bag or hang on wall to prevent loss.

Wet & Dry Vacuuming

Supports both wet and dry pickup with proper setup.

Dry vacuuming: Install HEPA filter. Use floor nozzle for large debris, brush for dust.
Wet vacuuming: Remove filter. Use floor nozzle for spills. Tank will auto-shutoff when full.
Emptying: Unplug vacuum. Detach tank by pressing release latch. Pour contents into drain.
Cleaning: Rinse tank with water after wet use. Allow to dry completely before reuse.
Clog removal: If suction decreases, check hose and nozzle for blockages.

WARNING! Do not vacuum flammable liquids, hot ashes, or sharp objects. Unplug before emptying tank.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

After each use: Empty tank, clean filter (tap or rinse), wipe exterior with damp cloth.
Monthly: Check hose for cracks or clogs. Inspect wheels and cords for damage.
Filter replacement: Replace HEPA filter every 6-12 months or when damaged.
Storage: Store in cool, dry place with cord wrapped and attachments stored.

CAUTION! Always unplug before maintenance. Do not immerse motor unit in water.

Safety Features

Automatic Shutoff: Prevents overflow in wet mode. Double-Insulated Motor: Reduces electric shock risk. HEPA Filtration: Contains allergens and fine particles.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Plug/outlet issue	Check power cord is plugged in; test outlet with another device.
Loss of suction	Full tank/clogged filter	Empty tank; clean or replace filter; check hose for blockages.
Motor overheats	Continuous use/clog	Turn off and let cool for 30 minutes; check for clogs in hose.
Tank not sealing	Debris on seal/latch	Clean tank rim and seal; ensure latch is fully engaged.
Leaking liquid	Cracked tank/loose hose	Inspect tank for cracks; ensure hose connection is tight.

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com