Shark HYDROVAC WD200UK Series Vacuum Cleaner Manual

The Shark HYDROVAC WD200UK Series is a powerful wet/dry vacuum cleaner designed for versatile cleaning tasks. It features a high-performance motor, large-capacity tank, HEPA filtration system, multiple suction modes, various attachments for different surfaces, cord management, and easy-empty dirt cup. Powered by standard household outlet. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum unit with motor, Detachable tank, Hose assembly, Power cord, Various cleaning attachments, HEPA filter, Cord wrap hooks.

Assembly & Setup

Unpack all components and inspect for damage.

1. Assemble main unit: Attach wheels and handle according to instructions.
2. Install filter: Place HEPA filter in designated compartment.
3. Connect hose: Attach hose to vacuum inlet until it clicks securely.
4. Attach accessories: Select appropriate tool for cleaning task.
5. Plug into power outlet: Ensure outlet is grounded and accessible.

WARNING! Ensure all parts are securely connected before operation. Keep hair, loose clothing, and fingers away from suction inlet.

First-Time Use

Prepare vacuum for initial operation.

1. Check filter installation: Ensure HEPA filter is properly seated.
2. Select dry mode: For regular vacuuming of dust and debris.
3. Test suction: Turn on unit and verify proper operation.
4. Adjust suction power: Use dial control for appropriate surface.
5. Empty after use: Always empty tank after each cleaning session.

CAUTION! Do not use for wet pickup without installing foam filter sleeve. Never immerse unit in water.

Specifications

• Model Series: WD200UK
• Tank Capacity: 2.0 gallons (7.6 liters)
• Motor Power: High-performance 6.0 amp motor
• Filtration: HEPA filter with foam sleeve for wet pickup
• Cord Length: 20 feet (6.1 meters)
• Suction Control: Adjustable dial with multiple settings
• Attachments: Crevice tool, dusting brush, upholstery tool
• Power Source: 120V AC, 60Hz
• Weight: 10.5 lbs (4.8 kg)
• Warranty: 5-year limited warranty

Controls and Settings

Main unit controls: Power switch, Suction control dial, Tank release button, Hose release button.

Operation: POWER switch (On/Off), SUCTION CONTROL (Low/Medium/High), TANK RELEASE (for emptying), HOSE RELEASE (for accessory changes).

Settings: Dry mode (standard filter), Wet mode (with foam sleeve), Carpet mode (higher suction), Hard floor mode (reduced suction). Maintenance indicators: Filter check light (if equipped), Tank full indicator. Storage: Cord wrap hooks, Attachment holders on unit.

Using Attachments

Select appropriate attachment for cleaning task.

1. Crevice tool: For tight spaces, corners, and edges.
2. Dusting brush: For delicate surfaces, blinds, and electronics.
3. Upholstery tool: For furniture, curtains, and car interiors.
4. Extension wands: For reaching high or difficult areas.

Tip: Ensure attachment clicks securely into hose before use. Clean attachments regularly to maintain suction power.

Wet & Dry Vacuuming

Supports both wet and dry pickup with proper configuration.

1. Dry vacuuming: Use standard HEPA filter for dust, dirt, and debris.
2. Wet vacuuming: Install foam filter sleeve before picking up liquids.
3. Liquid capacity: Do not exceed maximum fill line on tank.
4. After wet use: Empty immediately and clean all components.
5. Suction adjustment: Use lower setting for delicate surfaces.
6. Tank emptying: Press release button and pour contents carefully.
7. Filter maintenance: Wash foam sleeve after wet use; dry completely.
8. Storage: Ensure unit is completely dry before storing.

WARNING! Never use without proper filter for the task. Do not vacuum flammable liquids, hot ashes, or sharp objects.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty tank: After each use to prevent odors and mold.
2. Clean filter: Tap dry filter to remove dust; wash foam sleeve as needed.
3. Inspect hose: Check for clogs or damage regularly.
4. Clean attachments: Remove hair and debris from brushes.
5. Check seals: Ensure all gaskets and seals are intact.
6. Store properly: In dry location away from extreme temperatures.

CAUTION! Unplug unit before performing any maintenance. Allow all parts to dry completely before reassembly.

Storage & Care

Proper storage extends product life.

Wrap cord securely around hooks. Store attachments in designated holders. Ensure tank is completely empty and dry. Store in cool, dry place away from direct sunlight. Keep out of reach of children.

CAUTION! Do not store with liquids in tank. Avoid storing in damp areas to prevent mold growth.

Regulatory Information

UL Listed: Certified for safety standards. ETL Certified: Meets North American safety requirements. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398. Model WD200UK complies with applicable FCC regulations for home use.

Troubleshooting

Reset: Unplug for 10 minutes if unit overheats.

Service: 1-800-798-7398; www.sharkclean.com/support