Shark HYDROVAC WD200 B Vacuum Cleaner Manual

The Shark HYDROVAC WD200 B is a versatile wet/dry vacuum cleaner designed for both liquid spills and dry debris. It features a powerful motor, large-capacity tank, HEPA filtration system, multiple attachments for various surfaces, easy-empty design, and cord storage. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Wet & Dry Vacuuming 8. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum unit with motor, Detachable tank, Hose with wand, Power cord with storage, HEPA filter, Wet filter foam sleeve, Crevice tool, Dusting brush, Floor nozzle.

Feature	Description
Power Switch	Turns vacuum on/off
Tank Release Latches	For detaching tank for emptying
Hose Port	Connection point for hose and attachments
HEPA Filter	Traps fine dust and allergens
Wet Foam Sleeve	For liquid pickup (use with tank empty)
Cord Hook	For wrapping and storing power cord
Carry Handle	For easy transport
Tank Capacity Indicator	Shows when tank is full
Accessory Storage	Holds tools on unit
Suction Control	Adjusts suction power (on some models)

Assembly & Setup

Unpack all parts and inspect for damage.

Attach wheels/casters (if required): Snap into base slots.
Install filter: Place HEPA filter into top motor unit; ensure secure.
Attach hose: Push hose end firmly into hose port on tank.
Connect wand and tools: Extend wand and click desired tool into end.
Plug into grounded outlet.

WARNING! Ensure unit is unplugged during assembly. Do not use if any part is damaged.

First-Time Use

Before first use, ensure tank is clean and dry.

For dry vacuuming: Ensure HEPA filter is installed; tank is empty and dry.
For wet pickup: Install wet foam sleeve over filter; ensure tank is empty.
Turn power switch to ON (I).
Begin vacuuming; monitor tank capacity.
After use, turn off (O) and unplug.

CAUTION! Do not use for wet pickup without wet foam sleeve. Do not immerse motor unit in water.

Specifications

Model: Shark HYDROVAC WD200 B.
Type: Wet/Dry Vacuum.
Tank Capacity: 5 gallons (dry) / 4 gallons (wet).
Motor: Powerful suction motor with overload protection.
Filtration: HEPA filter + wet foam sleeve.
Hose Length: 5 ft.
Cord Length: 15 ft.
Attachments: Crevice tool, dusting brush, floor nozzle.
Power Source: 120V AC, 60Hz.
Weight: 12 lbs (empty).

Controls and Settings

Main unit: Power switch (ON/OFF), Tank release latches, Suction control dial (if equipped).

Operation: Plug in, select attachment, turn on. For delicate surfaces, reduce suction if adjustable.

Emptying: Turn off and unplug. Press latches to detach tank. Empty contents into trash or drain. Rinse tank if used for wet pickup; dry completely before reuse. Filter maintenance: Replace HEPA filter every 6-12 months or when dirty. Clean wet foam sleeve after each wet use; air dry.

Using Attachments

Attachments click onto wand or hose end.

Crevice Tool: For tight spaces, corners, between cushions.
Dusting Brush: For delicate surfaces, blinds, shelves, upholstery.
Floor Nozzle: For large floor areas; may have brush roll.
Extension Wand: For reaching high or under furniture.

Tip: Ensure attachment is securely clicked to prevent air loss.

Wet & Dry Vacuuming

Follow correct procedure for each type.

Dry Vacuuming: Use with HEPA filter only. Empty tank when full indicator shows or suction decreases.
Wet Pickup: Install wet foam sleeve. Ensure tank is empty and dry before starting. Do not let liquid reach motor unit. Empty tank immediately after use; clean and dry.
Large Debris: Use floor nozzle; avoid large objects that may clog hose.
Fine Dust/Allergens: Use HEPA filter to trap particles.

WARNING! Never use without appropriate filter. Do not vacuum flammable liquids or hot ashes.

Maintenance & Cleaning

Regular maintenance ensures performance and longevity.

Unplug before any maintenance.
Empty tank after each use.
Clean tank with mild detergent; rinse and dry thoroughly.
Check and clean HEPA filter monthly; replace when dirty or every 6-12 months.
Inspect hose for clogs; clear if necessary.
Wipe exterior with damp cloth; do not use harsh chemicals.
Store in cool, dry place with cord wrapped.

CAUTION! Do not wash motor unit. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power / won't turn on	Not plugged in / outlet issue	Check plug and outlet; try different outlet; check circuit breaker.
Loss of suction	Full tank / clog / dirty filter	Empty tank; check hose and attachments for clogs; clean or replace filter.
Motor overheats	Clog / filter dirty	Turn off, unplug, let cool. Clear clogs; clean filter.
Leaking from tank	Not sealed properly / damaged tank	Ensure tank is latched securely; check for cracks; replace if damaged.
Unpleasant odor	Dirty filter / tank not cleaned	Clean tank thoroughly; replace filter.
Wet pickup not working	Wet foam sleeve not installed	Install wet foam sleeve before wet vacuuming.

Reset: If motor overheats, turn off, unplug, let cool for 30 minutes before restarting.

Service: 1-800-798-7398; www.sharkclean.com