Shark HYDROVAC WD101 Vacuum Cleaner Manual

The Shark HYDROVAC WD101 is a versatile wet/dry vacuum cleaner designed for powerful suction on both wet spills and dry debris. It features a high-capacity tank, multiple attachments for various cleaning tasks, a washable filter, and a convenient cord storage system. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: High-capacity collection tank, Motor unit with suction control, Washable foam and felt filters, Crevice tool, Upholstery brush, Extension wand, Power cord with storage hooks.

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat, stable surface.

1. Attach wheels: Insert axles into base and secure with provided clips.
2. Install tank: Place collection tank onto base, ensuring it clicks into place.
3. Attach motor unit: Align motor unit with tank lid and twist to lock.
4. Install filter: For dry vacuuming, insert foam filter over cage; for wet, use foam and felt filters.
5. Attach hose: Connect hose to motor unit port and secure with locking collar.

WARNING! Ensure all parts are securely connected before use to prevent leaks or detachment.

First-Time Use

Before first use, ensure vacuum is fully assembled and filters are installed correctly.

1. Check filters: Ensure correct filter is installed for your cleaning task (dry or wet).
2. Plug in: Insert plug into a grounded 120V outlet.
3. Select mode: Set suction control to appropriate setting (Low for delicate surfaces, High for deep cleaning).
4. Test operation: Turn ON/OFF switch to verify motor runs smoothly.
5. Empty tank: After use, empty and rinse tank thoroughly.

CAUTION! Do not use without filters installed. Always unplug before maintenance.

Specifications

• Model: HYDROVAC WD101.
• Tank Capacity: 10 gallons.
• Motor: 5.0 HP peak.
• Suction Control: Adjustable (Low/High).
• Filters: Washable foam (wet/dry) and felt (wet).
• Hose Length: 7 feet.
• Cord Length: 10 feet.
• Attachments: Crevice tool, upholstery brush, extension wand.
• Power Source: 120V AC, 60Hz.
• Weight: 15 lbs (empty).

Controls and Components

Main Controls: ON/OFF switch, Suction control dial, Tank lid release button.

Components: Motor unit, Collection tank with carry handle, Hose with locking collar, Wheels for mobility, Power cord with storage hooks.

Operation: Turn ON/OFF switch to start/stop motor. Adjust suction control dial for desired power. Press tank lid release to remove lid for emptying. Use carrying handle to move vacuum. Wrap cord around storage hooks when not in use.

Using Attachments

Attachments enhance cleaning for specific tasks.

1. Attach hose to tool: Insert tool into hose end until it clicks.
2. Crevice tool: Use for baseboards, between appliances, and in corners.
3. Upholstery brush: Use on furniture, curtains, and stairs to gently remove dust and hair.
4. Extension wand: Attach to hose for floor cleaning or high reach areas.
5. Detach: Press release button on hose collar and pull tool out.

Tip: Ensure attachments are securely connected to prevent loss of suction.

Wet Pickup Mode

For cleaning liquid spills, flooded areas, or wet debris.

1. Install filters: Use both foam and felt filters over cage.
2. Check tank: Ensure tank is empty and securely locked.
3. Turn on: Set suction control to High for liquids.
4. Clean: Move vacuum slowly over wet area; do not submerge motor or hose.
5. Empty: Turn off and unplug. Release lid and empty liquid immediately. Rinse tank.
6. Dry filters: Remove and air-dry filters completely before reuse.

WARNING! Do not vacuum flammable liquids or hot ashes. Always unplug before emptying wet tank.

Dry Vacuum Mode

For dust, dirt, debris, and small particles.

1. Install filter: Use foam filter only over cage.
2. Attach tool: Select appropriate attachment for task.
3. Turn on: Adjust suction control as needed.
4. Vacuum: Move attachment over surface in slow, overlapping strokes.
5. Empty: Turn off and unplug. Release lid and empty debris into trash. Tap filter to remove dust.

Note: For fine dust, empty tank frequently to maintain suction.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty tank after each use.
2. Clean filters: Rinse foam and felt filters with water; air-dry completely.
3. Inspect hose: Check for clogs or damage; clear obstructions.
4. Wipe exterior: Use damp cloth to clean motor unit and tank.
5. Store properly: Coil cord on hooks; store in dry area.

CAUTION! Never operate with wet filters or damaged parts. Unplug before all maintenance.

Regulatory Information

This vacuum cleaner complies with relevant safety standards. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is intended for household use only.

Troubleshooting

Reset: If motor overheats, unplug and allow to cool for 30 minutes before restarting.

Service: 1-800-798-7398; www.sharkclean.com