Shark HYDROVAC WD100C Series Vacuum Cleaner Manual

The Shark HYDROVAC WD100C Series is a powerful wet/dry vacuum cleaner designed for versatile cleaning tasks. It features a high-capacity tank, powerful suction for both wet spills and dry debris, multiple nozzle attachments, a washable filter, and a durable, portable design. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Setup & Installation 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Attachments & Accessories 7. Wet & Dry Vacuuming 8. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-capacity collection tank, Powerful motor unit, Washable foam filter, Carrying handle, On-board accessory storage, Power cord with wrap, Hose with locking connectors, Floor nozzle, Crevice tool, Dusting brush.

Feature	Description
Wet/Dry Capability	Vacuums both liquids and solid debris
Tank Capacity	Large volume tank for extended cleaning
Washable Filter	Reusable foam filter for easy maintenance
Powerful Suction	High-performance motor for effective cleaning
Accessory Storage	Convenient on-board storage for nozzles and tools
Locking Hose	Secure connection to prevent dislodging during use
Carrying Handle	Integrated handle for easy portability
Cord Wrap	Built-in cord management for tidy storage
Floor Nozzle	For efficient cleaning of hard floors and low-pile carpets
Specialized Tools	Crevice tool and dusting brush for detailed cleaning

Setup & Installation

Unpack and inspect all contents. Assemble components on a flat, stable surface.

Assemble the tank: Place tank on floor, ensure it is level and secure.
Attach the motor unit: Align and lock motor unit onto the top of the tank until it clicks into place.
Connect the hose: Insert hose end into the tank inlet and twist to lock.
Attach desired nozzle/tool: Press accessory onto the end of the hose or extension wand.
Plug into a grounded electrical outlet.

WARNING! Ensure the unit is unplugged during assembly. Do not use if any parts are damaged.

First-Time Use

Before first use, ensure the filter is clean and properly installed.

Check filter: Remove motor unit, ensure foam filter is seated correctly on the filter cage.
Dry vacuuming: For dry debris, ensure tank is empty and dry. Attach floor nozzle or tool.
Wet vacuuming: For liquids, ensure filter is removed. Do not use filter when vacuuming large amounts of liquid.
Power on: Plug in, press the power switch to begin vacuuming.
Empty tank: Turn unit off and unplug before emptying collected debris or liquid.

CAUTION! Never vacuum flammable liquids, hot ashes, or sharp objects. Do not submerge any part of the unit in water.

Specifications

Model Series: HYDROVAC WD100C.
Tank Capacity: [Specify capacity, e.g., 10 gallons].
Motor: High-efficiency, bypass motor.
Power Cord: Long-length cord with grounded plug.
Filter System: Washable foam filter.
Hose Length: [Specify length] flexible hose.
Included Tools: Floor nozzle, crevice tool, dusting brush.
Power Source: 120V AC, 60Hz.
Weight: [Specify weight] lbs.

Controls and Functions

Main unit features: Power Switch, Tank Release Latches, Hose Inlet, Cord Wrap.

Operation: Power Switch turns motor ON/OFF. Tank Latches allow for easy removal of the tank for emptying. Hose Inlet provides secure connection point. Always ensure hose and tools are securely locked before operation.

For wet pickup, remove the foam filter. For dry pickup, always use the foam filter to protect the motor. The float valve will automatically shut off suction if the tank becomes full of liquid to prevent overflow into the motor.

Attachments & Accessories

Use the correct attachment for the cleaning task.

Floor Nozzle: For large area cleaning on hard floors and carpets.
Crevice Tool: For tight spaces, corners, and along edges.
Dusting Brush: For delicate surfaces, upholstery, and blinds.
Extension Wands (if included): For extended reach.

Tip: Store attachments on the unit's built-in storage clips when not in use.

Wet & Dry Vacuuming

Follow proper procedures for different types of pickup.

Dry Vacuuming: Ensure filter is installed. Vacuum debris. Empty tank when full or after use.
Wet Vacuuming: Remove foam filter before vacuuming liquids. Do not use filter. Vacuum liquid until tank is full or suction stops (auto-shutoff). Empty tank immediately after use.
After Wet Pickup: Rinse tank with clean water. Allow tank and internal parts to air dry completely before storage or dry vacuuming. Reinstall clean, dry filter for dry use.
Clog Removal: Turn off and unplug unit. Disconnect hose and check for blockages in hose, nozzle, or inlet.

WARNING! Never leave liquid in the tank for extended periods. Always dry components thoroughly to prevent mold and motor damage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Empty Tank: Empty after every use. For liquids, empty immediately.
Clean Filter: Rinse foam filter in lukewarm water. Squeeze out excess water and allow to air dry completely before reinstalling.
Inspect Hose & Tools: Check for cracks or clogs. Clear any obstructions.
Clean Tank: Wipe interior with a damp cloth. Do not use harsh chemicals.
Check Motor Unit: Keep vents clear of dust and debris.

CAUTION! Always unplug the vacuum before performing any maintenance. Do not operate with a wet or damp filter.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full tank, clogged hose/filter, loose connection	Empty tank. Check and clear hose, nozzle, and inlet. Ensure filter is clean and dry. Check all connections are tight.
Motor won't start	Unit not plugged in, full tank (wet mode), tripped thermal protector	Plug in unit. Empty tank if full of liquid. Allow motor to cool for 30-60 minutes if overheated.
Liquid leaking	Tank not sealed properly, damaged tank or gasket	Turn off and unplug. Ensure tank is locked onto motor unit correctly. Inspect tank seal and lid for damage.
Unusual noise/vibration	Foreign object in impeller, loose parts	Turn off and unplug. Check for and remove debris from hose, inlet, or fan chamber. Tighten any loose components.
Filter gets wet during dry vacuuming	Filter installed during wet pickup, liquid in debris	Remove filter and allow to dry completely. Do not use filter for wet pickup.

Service: For repairs, contact authorized service center. Do not attempt to disassemble motor unit.

Support: 1-800-798-7398; sharkclean.com