Shark HYDROVAC WD100 Series Vacuum Cleaner Manual

The Shark HYDROVAC WD100 Series is a powerful wet/dry vacuum cleaner designed for versatile cleaning tasks. It features a high-capacity tank, powerful suction for both wet spills and dry debris, a HEPA filtration system, multiple attachments for various surfaces, and an easy-empty design. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Setup & Assembly 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Operating Modes 7. Cleaning & Maintenance 8. Storage & Care 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Main vacuum unit with motor, Detachable tank, Hose and wand assembly, Power cord, HEPA filter, Wet nozzle and squeegee, Crevice tool, Dusting brush, Carpet nozzle.

Feature	Description
Wet/Dry Capability	Cleans both liquid spills and dry debris
HEPA Filtration	Traps 99.9% of dust and allergens
Large Capacity Tank	Easy to detach and empty
Powerful Suction	Adjustable suction control
Multiple Attachments	For floors, carpets, upholstery, and crevices
Easy-Empty Design	Quick-release tank for mess-free disposal
On-Board Storage	Attachments store on the unit
Power Switch	Turns vacuum on/off
Suction Control Dial	Adjusts suction power for different surfaces
Cord Wrap	Integrated cord storage

Setup & Assembly

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the tank: Align tank with base and lock into place until it clicks.
Connect hose: Insert hose end into the tank port and twist to secure.
Attach wand: Insert wand into hose end and lock.
Choose attachment: Select appropriate tool (floor nozzle, brush, etc.) and attach to wand.
Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, ensure all parts are properly assembled and tank is empty and dry.

Check filter: Ensure HEPA filter is correctly installed in the lid.
Select mode: Set suction control dial to appropriate setting (Low for delicate surfaces, High for carpets).
Power on: Plug in and turn on power switch.
Begin cleaning: Move nozzle slowly over surface for effective cleaning.
Empty tank: When full, turn off, unplug, detach tank, and empty contents.

CAUTION! Do not use on wet surfaces with electrical appliances plugged in. Avoid vacuuming large objects that may clog hose.

Specifications

Model Series: WD100 Series.
Tank Capacity: 10 gallons (dry) / 8 gallons (wet).
Motor Power: High-efficiency motor for powerful suction.
Filtration: HEPA filter (washable).
Cord Length: 20 feet.
Hose Length: 7 feet.
Attachments Included: Floor nozzle, crevice tool, dusting brush, wet nozzle, squeegee.
Power Source: 120V AC, 60Hz.
Weight: 15 lbs (empty).

Controls and Parts

Main Unit: Power switch, Suction control dial, Tank release latch, Hose port, Cord wrap. Tank: Lid with filter, Carry handle, Drain plug (for wet mode).

Attachments: Floor nozzle (for carpets/hard floors), Crevice tool (tight spaces), Dusting brush (furniture/upholstery), Wet nozzle & squeegee (liquid pickup).

Operation: Turn power switch ON/OFF. Adjust suction with dial. Use tank release to detach. Empty via drain plug or by removing lid.

Operating Modes

Dry Mode: For dust, dirt, debris on carpets and hard floors. Wet Mode: For liquid spills; ensure filter is removed or wet filter installed.

Select appropriate attachment for surface.
Set suction control (Low for rugs, High for carpets).
Move nozzle slowly in overlapping strokes.
For wet pickup, use wet nozzle and empty tank immediately after use.

Tip: For best results on carpets, make several passes in different directions.

Cleaning & Maintenance

Regular maintenance ensures optimal performance and longevity.

Empty tank after each use.
Clean filter monthly: Rinse HEPA filter under cold water and air dry completely before reinstalling.
Check hose for clogs: Disconnect and clear any blockages.
Wipe exterior with damp cloth; do not immerse in water.
Inspect attachments for wear and clean as needed.

WARNING! Always unplug before maintenance. Do not operate without filter installed.

Storage & Care

Store in a cool, dry place. Wrap cord around cord wrap. Store attachments on unit or in provided bag.

CAUTION! Do not store with wet tank; ensure tank and filter are completely dry to prevent mold and odors.

Safety Information

Read all instructions before use. Do not use near flammable liquids or in explosive atmospheres. Keep hair, loose clothing, and fingers away from openings. Use only Shark-approved accessories.

Warranty & Support

Shark HYDROVAC WD100 Series comes with a 5-year limited warranty. Register your product online at sharkclean.com. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full tank/clogged filter/hose blockage	Empty tank; clean filter; check hose and attachments for clogs.
Vacuum not turning on	Power cord/outlet issue	Check power cord connection; try different outlet; ensure power switch is ON.
Leaking tank	Improperly sealed lid/cracked tank	Ensure lid is locked; check tank for cracks; replace if damaged.
Unusual noise	Foreign object in impeller/hose	Turn off and unplug; inspect hose and motor area for obstructions.
Bad odor	Wet filter/tank not cleaned	Clean and dry filter thoroughly; wash tank with mild detergent and dry.

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com