Shark HV330UK Series Vacuum Cleaner Manual

The Shark HV330UK Series is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features DuoClean technology for both carpets and hard floors, Anti-Allergen Complete Seal technology, LED headlights, a large dust cup capacity, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, wand, hose, dust cup, and accessory tools.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into main body until it clicks.
2. Connect hose: Attach hose to wand and main body ports.
3. Install floor nozzle: Slide nozzle onto wand until secure.
4. Attach tools: Store tools on accessory caddy or main body clips.
5. Plug into mains power (230V, 50Hz).

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure foam and felt filters are installed.
2. Empty dust cup: Press release button to remove and empty.
3. Select floor setting: Use brushroll on/off for carpets vs. hard floors.
4. Adjust suction: Use power settings for different surfaces.
5. Test attachments: Connect tools to hose for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark HV330UK Series.
• Power: 700W motor.
• Dust Cup Capacity: 0.9 litres.
• Cord Length: 7.5 metres.
• Technology: DuoClean, Anti-Allergen Complete Seal.
• Filters: Washable foam and felt filters.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 230V AC, 50Hz.
• Weight: 6.8 kg.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power button, suction control (Low/High), brushroll on/off switch.

Body: Dust cup release, wand release, hose connector, accessory storage.

Settings: Brushroll on for carpets; off for hard floors. Suction high for deep cleaning; low for delicate rugs. Lift-Away mode: Detach pod for stairs and furniture. LED lights: Automatically illuminate in dark areas.

Using Attachments

For above-floor cleaning: Connect tools to hose or wand.

1. Detach hose from wand or body.
2. Insert tool into hose end.
3. Select appropriate suction setting.
4. Clean upholstery, crevices, dust surfaces.
5. Return tools to storage clips after use.

Tip: Use dusting brush for delicate surfaces; crevice tool for tight spaces.

Cleaning Modes

Upright mode: For floors. Lift-Away mode: Portable cleaning.

1. Upright: Use floor nozzle attached to wand.
2. Lift-Away: Press release button to detach pod; carry to clean stairs or furniture.
3. Above-floor: Use hose with attachments.
4. Adjust suction as needed for different tasks.

WARNING! Do not use vacuum to pick up sharp objects that could damage filters.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full or after each use.
2. Clean filters: Rinse foam and felt filters monthly; air dry 24h.
3. Check brushroll: Remove hair and debris regularly.
4. Inspect hose: Clear blockages if suction reduces.
5. Store properly: Wrap cord; store in dry place.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

Complies with EU directives for electrical safety and electromagnetic compatibility. CE marked. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Reset: Unplug for 30 minutes if motor overheats.

Service: 0800 862 0453; www.sharkclean.co.uk