Shark HV300NZ Vacuum Cleaner Manual

The Shark HV300NZ is a versatile upright vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal with HEPA filter, LED headlights, Lift-Away capability for portable cleaning, and a self-cleaning brushroll. It is designed for deep cleaning on carpets and hard floors, capturing dust and allergens. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Anti-Allergen Complete Seal system, HEPA filter, LED headlights, Lift-Away pod, crevice tool, dusting brush, upholstery tool, and wand.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into vacuum body until it clicks.
2. Attach floor nozzle: Connect floor nozzle to wand or Lift-Away pod.
3. Install filters: Ensure HEPA and foam filters are properly seated.
4. Charge battery (if cordless model): Plug charger into outlet and connect to vacuum.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in vacuum (if corded) or ensure battery is charged.

1. Select floor setting: Use brushroll on for carpets; off for hard floors.
2. Adjust suction: Use suction control for delicate rugs or high-pile carpets.
3. Begin cleaning: Push vacuum forward and back slowly for best results.
4. Use attachments: Detach wand or Lift-Away pod for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes to avoid damage.

Specifications

• Model: Shark HV300NZ.
• Type: Upright vacuum with Lift-Away.
• Technology: DuoClean PowerFins, Anti-Allergen Complete Seal.
• Filtration: HEPA filter, foam filter.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Cord length: 25 feet (corded models).
• Dust cup capacity: 1.5 quarts.
• Power Source: 120V AC, 60Hz (corded) or rechargeable battery (cordless).
• Weight: 15.2 lbs.

Controls and Settings

Main controls located on vacuum body and handle.

Body: POWER button, brushroll on/off, suction control, dust cup release. Handle: Wand release, attachment holder.

Settings: Brushroll on (carpets), brushroll off (hard floors), suction high/max, suction low/eco. Indicators: LED lights for power and filter status. Maintenance: Empty dust cup when full; clean filters monthly.

Using Attachments

Attachments for above-floor cleaning: crevice tool, dusting brush, upholstery tool.

1. Detach wand: Press wand release button on handle.
2. Connect tool: Insert tool into wand or hose end.
3. Select suction: Use appropriate suction setting for task.
4. Clean: Use tool on furniture, stairs, blinds, or tight spaces.

Tip: Store attachments on vacuum body for easy access.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty into trash; reinstall.
2. Clean filters: Remove HEPA and foam filters; tap out debris; rinse if needed (air dry completely).
3. Clear brushroll: Turn off vacuum; remove debris from brushroll with scissors or tool.
4. Check for blockages: Inspect hose, wand, and nozzle for obstructions.

WARNING! Unplug vacuum before maintenance. Do not use damaged filters.

Storage & Care

Store in cool, dry place. Wrap cord around hooks (if corded).

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Turn off, unplug, check filters and blockages, then restart.

Service: 1-800-798-7398; sharkclean.com