Shark HV300BR Vacuum Cleaner Manual

The Shark HV300BR is a versatile upright vacuum cleaner featuring a powerful motor, HEPA filtration system, multi-surface brush roll, Lift-Away technology for portable cleaning, LED headlights, and a variety of attachments for above-floor cleaning. It is designed for residential use on carpets, hard floors, and upholstery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, dust cup, handle with controls, floor nozzle with brush roll, wand, and accessory attachments.

FeatureDescription
Powerful Suction MotorProvides strong suction for deep cleaning carpets and floors
HEPA Filtration SystemCaptures 99.9% of dust and allergens, trapping them inside the dust cup
Multi-Surface Brush RollAutomatically adjusts between carpets and hard floors
Lift-Away TechnologyDetachable pod for portable cleaning above floors
LED HeadlightsIlluminates dark areas under furniture
Large Capacity Dust CupEasy-to-empty, bagless design
Accessory StorageBuilt-in caddy for storing attachments on the vacuum
Adjustable HandleErgonomic design for comfortable use
Brush Roll ShutoffAllows gentle cleaning on delicate rugs
Wand Release ButtonQuickly detach wand for above-floor cleaning

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

  1. Attach the handle: Align handle with main body and push down until it clicks into place.
  2. Connect the wand: Insert wand into the socket on the front of the vacuum until secure.
  3. Attach floor nozzle: Connect nozzle to the wand by aligning arrows and pushing together.
  4. Install attachments: Store crevice tool, dusting brush, and upholstery tool in built-in caddy.
  5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; turn on power switch.

  1. Select surface setting: Use brush roll switch for carpets (ON) or hard floors/delicate rugs (OFF).
  2. Adjust suction power: Use power dial on handle for high or low suction as needed.
  3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
  4. Empty dust cup: Press release button to remove and empty cup when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Controls and Settings

Main controls located on handle and body. Handle: Power switch, suction power dial, brush roll on/off button. Body: Dust cup release, wand release, Lift-Away button.

Settings: Suction Power (High/Low), Brush Roll (On/Off for carpets vs. hard floors), Headlights (Auto-on when powered).

Maintenance indicators: Filter check light alerts when filters need cleaning. Empty dust cup when full indicator appears.

Using Attachments

For above-floor cleaning: detach wand and attach desired tool.

  1. Turn off vacuum and unplug from outlet.
  2. Press wand release button to detach wand from floor nozzle.
  3. Choose attachment: crevice tool for tight spaces, dusting brush for surfaces, upholstery tool for furniture.
  4. Attach tool to end of wand or directly to hose.
  5. Plug in vacuum, turn on, and clean.

Tip: Use the pet hair tool for removing pet hair from carpets and furniture.

Lift-Away Mode

Enables portable cleaning of stairs, furniture, and above-floor areas.

  1. Ensure vacuum is turned off.
  2. Press Lift-Away button on body to detach pod from floor nozzle.
  3. Carry pod by handle; hose extends for reach.
  4. Attach desired tool directly to hose or use wand.
  5. Turn on power switch on pod to begin cleaning.
  6. Reattach pod to floor nozzle by aligning and pressing down until it clicks.

WARNING! Do not use Lift-Away mode on wet surfaces. Keep hose away from sharp edges.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use: Press release button, remove cup, empty into trash.
  2. Clean filters monthly: Remove HEPA and foam filters, rinse with water, air dry completely before reinstalling.
  3. Clear brush roll weekly: Remove floor nozzle, cut away wrapped hair and debris with scissors.
  4. Check for clogs: If suction is weak, inspect hose, wand, and nozzle for blockages.
  5. Inspect cord and plug for damage regularly.

CAUTION! Always unplug vacuum before maintenance. Ensure filters are completely dry before reinserting.

Care & Storage

Unplug and wind cord neatly after each use. Store in a cool, dry place.

CAUTION! Do not store vacuum with wet filters. Avoid storing in damp areas to prevent mold and mildew.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower outlet/cordCheck outlet; ensure cord is plugged in securely; try different outlet.
Loss of suctionFull dust cup/clogged filtersEmpty dust cup; clean filters; check hose and nozzle for blockages.
Brush roll not spinningObstruction/switch settingTurn off, unplug, clear debris from brush roll; ensure brush roll switch is ON.
Vacuum overheatsClogged filters/full dust cupTurn off, unplug, let cool; empty dust cup and clean filters.
Unusual noiseForeign object in brush roll or hoseTurn off, unplug, inspect brush roll, hose, and wand for obstructions.

Reset: Unplug vacuum for 30 minutes to reset thermal protector if overheated.

Service: 1-800-798-7398; www.sharkclean.com

Shark HV300BR Vacuum Cleaner Manual © - All Rights Reserved 2025