Shark HV300 Vacuum Cleaner Manual

The Shark HV300 is a powerful upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, swivel steering, and multiple cleaning modes for carpets and hard floors. It includes various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean brushroll, Handle with controls, Dust cup with release, Hose and wand, Cleaning attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
DuoClean Technology	Dual brushrolls for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Capacity Dust Cup	Easy-empty, bagless design
Swivel Steering	Maneuvers easily around furniture and obstacles
Cleaning Modes	Adjustable suction power for different surfaces
POWER Button	Turns vacuum on/off
Mode Selector	Switches between carpet and hard floor settings
Wand Release	Quickly detaches wand for above-floor cleaning
Attachment Holder	Stores tools on the vacuum for easy access

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Install wand: Insert wand into hose connector until secure.
Attach hose: Connect hose to the vacuum body and wand.
Mount attachments: Place crevice tool, dusting brush, and upholstery tool on holder.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll during installation.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select floor type: Use mode selector for carpet or hard floor setting.
Adjust suction: Use power dial for higher/lower suction as needed.
Begin cleaning: Press POWER button; push vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press release button; empty contents into trash; reinstall securely.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark HV300.
Technology: DuoClean with Anti-Allergen Complete Seal.
Power: Adjustable suction with multiple settings.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Filtration:Washable foam and felt filters.
Power Source: 120V AC, 60Hz.

Weight: 15 lbs.

Controls and Settings

Main controls located on handle. Front of vacuum: POWER button, Mode selector (Carpet/Hard Floor), Suction power dial.

Handle: POWER, Suction dial, Wand release button, Hose grip.

Cleaning Modes: Carpet mode (agitator brushroll on), Hard Floor mode (brushroll off). Suction: Adjustable via dial (Low/Medium/High). Filtration: Washable foam and felt filters. Maintenance: Dust cup release, Brushroll access door.

Using Attachments

For above-floor cleaning: Detach wand and connect desired tool.

Turn off vacuum and unplug from outlet.

Press wand release button to detach wand from vacuum body.

Select attachment: Insert crevice tool, dusting brush, or upholstery tool into wand end.

Plug in vacuum; turn on to use attachment.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet Mode: Activates brushroll for deep carpet cleaning.

Hard Floor Mode: Deactivates brushroll to prevent scattering debris.

Suction Control: Adjust dial for delicate rugs or high-pile carpets.

LED Lights: Automatically illuminate in dark areas.

Swivel Steering: Maneuver around furniture with ease.

WARNING! Do not use hard floor mode on carpets; may reduce cleaning effectiveness.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.

Clean filters monthly: Rinse foam and felt filters; air dry completely before reinstalling.

Check brushroll: Remove hair and debris; ensure free rotation.

Inspect hose and wand for clogs; clear if necessary.

Store in dry area; wrap cord around hooks.

CAUTION! Unplug before maintenance. Do not use damaged filters or brushroll.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC; all rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Vacuum won't turn on Power cord/outlet Check plug connection; try different outlet; ensure POWER button pressed.

Loss of suction Full dust cup/clog Empty dust cup; check hose, wand, and brushroll for blockages.

Brushroll not spinning Debris/hair wrap Turn off and unplug; remove debris from brushroll ends.

Vacuum overheats Clog/filter Check for clogs; clean filters; allow to cool for 60 minutes.

Unusual noise Foreign object Turn off immediately; check for objects in brushroll, hose, or wand.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com

Shark HV300 Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure POWER button pressed.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and brushroll for blockages.
Brushroll not spinning	Debris/hair wrap	Turn off and unplug; remove debris from brushroll ends.
Vacuum overheats	Clog/filter	Check for clogs; clean filters; allow to cool for 60 minutes.
Unusual noise	Foreign object	Turn off immediately; check for objects in brushroll, hose, or wand.