Shark FREESTYLE SV1110 Vacuum Cleaner Manual

The Shark FREESTYLE SV1110 is a lightweight, cordless stick vacuum cleaner featuring a self-cleaning brushroll, powerful suction, dual-surface cleaning capabilities, LED headlights, and a removable handheld pod. It is designed for quick cleanups on both carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lightweight stick body, Self-Cleaning Brushroll, LED headlights, Removable Handheld Pod, Wall-Mount Charging Dock, Washable Foam & Felt Filters.

Assembly & Setup

Unpack all components and inspect for damage.

1. Attach the handle: Insert the handle into the main body until it clicks into place.
2. Install the wall dock: Mount the charging dock on a wall using provided screws.
3. Charge the vacuum: Place the vacuum onto the dock; ensure the battery indicator lights up.
4. Attach cleaning tools: Connect the crevice tool or dusting brush to the handheld pod as needed.

WARNING! Ensure the vacuum is fully charged before first use. Keep the charging area dry.

First-Time Use

Fully charge the vacuum, then power on to begin cleaning.

1. Power on: Press the power button on the handle.
2. Select surface mode: Use the floor selector switch for carpets (I) or hard floors (II).
3. Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
4. Use handheld mode: Press the release button to detach the pod for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from the brushroll.

Specifications

• Model: FREESTYLE SV1110.
• Type: Cordless Stick Vacuum.
• Battery: Rechargeable Lithium-Ion.
• Runtime: Up to 30 minutes (varies with mode).
• Charging Time: Approximately 3.5 hours.
• Dust Cup Capacity: 0.5 dry quarts.
• Filters: Washable Foam & Felt Filters.
• Weight: 7.5 lbs.
• Included Tools: Crevice Tool, Dusting Brush.
• Power Source: 120V AC, 60Hz Charger.

Controls and Parts

Main Handle: POWER button, Battery Indicator LEDs, Handheld Release Button. Floor Selector Switch: Position I for carpets, II for hard floors. Brushroll Housing: Self-Cleaning Brushroll, LED Headlights.

Wall Dock: Charging contacts, Mounting bracket. Handheld Pod: Tool attachment port, Power button (on handle).

Operation: Press POWER to start/stop; use floor switch to adjust for surface; press release to convert to handheld. Maintenance: Empty dust cup after each use; clean filters monthly; check brushroll for obstructions.

Cleaning Modes

Stick Mode: For floors and large area rugs. Handheld Mode: For stairs, upholstery, and tight spaces.

1. Ensure vacuum is powered off before switching modes.
2. For stick mode, ensure the handle is fully attached and locked.
3. For handheld mode, press the release button and lift the pod away from the stick.
4. Attach tools directly to the handheld pod for targeted cleaning.

Tip: Use the crevice tool for corners and edges; use the dusting brush for delicate surfaces.

Emptying the Dust Cup

Empty the dust cup after each use to maintain suction.

1. Power off the vacuum and place it over a trash can.
2. Press the dust cup release button and lift the cup away from the body.
3. Hold the cup over the trash and press the bottom door release to open it.
4. Gently tap to remove debris. Close the door securely.
5. Reattach the dust cup to the vacuum until it clicks.

WARNING! Do not use the vacuum if the dust cup is not properly attached. Empty in a well-ventilated area.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Clean the filters: Remove foam and felt filters monthly; rinse with cold water and air dry for 24 hours.
2. Clear the brushroll: Turn off and unplug. Use scissors to cut away any wrapped hair or fibers.
3. Check for blockages: Inspect the air path from the dust cup to the nozzle.
4. Wipe exterior: Use a dry cloth to clean the vacuum body.

CAUTION! Do not use the vacuum without filters. Ensure all parts are completely dry before reassembly.

Battery & Charging

Use only the provided charger and wall dock.

• Charge fully before first use.
• Store and charge at room temperature.
• Battery indicator shows charge level: 3 lights (full), 2 lights (medium), 1 light (low), flashing (needs charge).
• If not using for extended periods, store with a 50% charge.

WARNING! Do not attempt to replace or disassemble the battery. Contact Shark Customer Service for battery issues.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com/support or contact 1-800-798-7398.

Troubleshooting

Reset: Turn off, remove from charger, and hold power button for 10 seconds.

Service: 1-800-798-7398; sharkclean.com/support