Shark EZ ROBOT SELF-EMPTY XL 900AE Series Vacuum Cleaner Manual

The Shark EZ ROBOT SELF-EMPTY XL 900AE Series is an advanced robotic vacuum cleaner featuring self-emptying technology, powerful suction with DuoClean PowerFins, Matrix Grid Navigation, and compatibility with the SharkClean app for smart home control. It includes a Self-Empty Base that holds up to 60 days of dirt, an anti-allergen complete seal, and a rechargeable battery. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Robot Vacuum, Self-Empty Base, Power Cord, Remote Control, Side Brushes, Filter, User Manual.

Unboxing & Contents

Carefully unpack and inspect all components. Place on a stable, level surface.

1. Remove the robot vacuum, Self-Empty Base, and accessories from the box.
2. Install side brushes: Align and press onto the slots on the bottom of the robot.
3. Position the Self-Empty Base: Place against a wall with at least 3 feet of clearance on each side and 5 feet in front.
4. Connect the Self-Empty Base power cord to an outlet.
5. Charge the robot: Place it on the base charging contacts; ensure power light is on.

WARNING! Keep the robot and base away from stairs, heat sources, and water. Do not place on unstable surfaces.

First-Time Setup

Power on the robot and base; follow initial setup prompts.

1. Initial Charge: Allow the robot to charge fully (approx. 4-6 hours) before first use.
2. Install the SharkClean App: Download from the App Store or Google Play.
3. Connect to Wi-Fi: Follow in-app instructions to connect the robot to your home network (2.4 GHz required).
4. Map Your Home: Start a cleaning cycle to allow the robot to create a map of your home.
5. Set Up No-Go Zones: Use the app or magnetic boundary strips to restrict access to certain areas.

CAUTION! Clear the floor of small objects, cords, and loose rugs before the first run.

Specifications

• Model Series: Shark EZ Robot Self-Empty XL 900AE.
• Navigation: Matrix Grid Navigation with smart sensors.
• Suction Power: High-performance motor with DuoClean brushrolls.
• Dust Bin Capacity: Robot: 0.5L; Self-Empty Base: 1.5L sealed bag.
• Battery: Rechargeable lithium-ion; runtime up to 90 minutes.
• Connectivity: Wi-Fi (2.4 GHz), SharkClean app, voice control.
• Filter: Washable high-efficiency filter.
• Power Source: 120V AC, 60Hz.
• Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Indicators

Access controls via the robot's buttons, remote, or app. Robot Top: CLEAN (Start/Pause), DOCK (Return to Base), SPOT (Spot Clean), Wi-Fi Indicator.

Remote: CLEAN, DOCK, SPOT, MODE (Eco/Normal/Max), SCHEDULE, EDGE (Edge Cleaning).

Self-Empty Base Indicators: Power (solid blue), Bag Full (red light), Error (flashing light). Robot Indicators: Battery (green/amber/red), Wi-Fi (blue/off), Error (flashing red). App Controls: Start/Pause, Schedule, Room Select, History, Settings.

Using the SharkClean App

Control and monitor your robot remotely.

1. Download and open the SharkClean app; create an account.
2. Add your robot: Follow in-app pairing instructions.
3. Features: View cleaning map, set schedules, create no-go zones, select specific rooms to clean, view cleaning history, receive notifications.
4. Voice Control: Link with Amazon Alexa or Google Assistant for hands-free commands.

Tip: Ensure your robot and phone are on the same Wi-Fi network for initial setup.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for customized cleaning.

1. Start Cleaning: Press CLEAN on robot or app; it will begin a full house clean.
2. Modes: Select Eco (quiet), Normal (balanced), or Max (deep clean) via remote or app.
3. Spot Clean: Press SPOT for intensive cleaning of a 3x3 foot area.
4. Edge Clean: Activates focused cleaning along walls and edges.
5. Scheduling: Use the app to set daily or weekly cleaning schedules for specific times.
6. Room Select: After mapping, choose specific rooms to clean via the app.
7. Recharge & Resume: If battery is low, robot returns to base, recharges, and resumes cleaning where it left off.

WARNING! Remove fragile items from the floor before cleaning. Keep pets and children away during operation.

Self-Empty Base Operation

The base automatically empties the robot's dust bin after each cleaning cycle.

1. Ensure the base is plugged in and the bag is properly installed.
2. After the robot docks, the base will activate and empty the contents into the sealed bag.
3. Bag Full Indicator: Red light on base signals when the bag needs replacement (approx. every 60 days).
4. Replace Bag: Open the front door of the base, remove the full bag, and insert a new Shark genuine bag.

CAUTION! Only use Shark genuine bags. Do not operate with a missing or full bag.

Maintenance & Cleaning

Regular maintenance ensures optimal performance. Unplug the base before maintenance.

• Empty Dust Bin: Remove and empty the robot's dust bin after each cycle (if not using self-empty).
• Clean Brushes: Remove brushrolls and side brushes monthly; clear hair and debris.
• Wash Filter: Rinse the filter with cold water every month; air dry completely for 24 hours before reinstalling.
• Clean Sensors: Wipe cliff sensors and charging contacts with a dry cloth.
• Clean Wheels: Remove any wrapped hair or debris from wheels.

CAUTION! Do not use the robot without the filter. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).

Troubleshooting

Reset: In app: Settings > Robot Settings > Reset Robot. Or hold buttons on robot.

Service: 1-800-798-7398; sharkclean.com