Shark EZ ROBOT RV9116ZXUS Vacuum Cleaner Manual

The Shark EZ ROBOT RV9116ZXUS is a self-emptying robot vacuum with Wi-Fi connectivity, home mapping, multi-surface cleaning, and a self-cleaning brushroll. It features Smart Sensor Navigation 2.0, a high-efficiency filter, and compatibility with the SharkClean app for scheduling and control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging Dock, Side Brushes, High-Efficiency Filter, Remote Control, Power Adapter.

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into a sealed bag
Smart Sensor Navigation 2.0	Uses sensors to map and navigate your home
Multi-Surface Cleaning	Adjusts suction for carpets and hard floors
Self-Cleaning Brushroll	Reduces hair wrap for pet owners
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
High-Efficiency Filter	Captures 99% of dust and allergens
Boundary Strips	Included to set no-go zones
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Spot Clean	Focuses cleaning on a concentrated area

Installation & Setup

Unpack and inspect all contents. Place base on a level surface against a wall.

Assemble the base: Connect power adapter to base and plug into wall outlet.
Prepare the robot: Install side brushes by pressing onto slots. Ensure filter is installed in dustbin.
Charge the robot: Place robot on charging contacts at base. Allow full charge (approx. 4 hours).
Clear the area: Remove small objects, cords, and loose rugs from floor.

WARNING! Keep base away from stairs or ledges. Ensure charging area is dry and free of obstructions.

First-Time Use

Power on robot; follow initial setup prompts.

Initial mapping run: Press CLEAN on robot or remote to start first cleaning for home mapping.
Set up Wi-Fi: Download SharkClean app, follow in-app instructions to connect robot to your network.
Name your rooms: Use app to label mapped rooms for targeted cleaning.
Set boundaries: Place boundary strips to block off areas you want the robot to avoid.

CAUTION! Do not pick up or move robot during initial mapping run.

Specifications

Model: Shark EZ ROBOT RV9116ZXUS.
Type: Self-Emptying Robot Vacuum.
Suction Power: Adjustable via app (Eco, Normal, Max).
Dustbin Capacity: Robot: 0.2 gallons; Base: 1.2 gallons (bagged).
Battery: Lithium-ion, up to 90 minutes runtime.
Connectivity: Wi-Fi 2.4 GHz, SharkClean app, Alexa, Google Assistant.
Filter: High-Efficiency, washable.
Navigation: Smart Sensor Navigation 2.0 with cliff detection.
Power Source: 120V AC, 60Hz.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access controls via Robot buttons, Remote, or SharkClean app. Robot Buttons: POWER, CLEAN, SPOT, DOCK.

Remote: POWER, CLEAN, SPOT, DOCK, SCHEDULE, MAX, ECO.

App Settings: Cleaning modes (Quiet, Normal, Max), Scheduling (daily, specific rooms), Room Select (clean specific mapped rooms), History (view cleaning reports), Notifications (bag full, error alerts). Maintenance reminders: Filter cleaning, brushroll check, side brush replacement.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Download SharkClean app from Apple App Store or Google Play Store.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot for 3 seconds until Wi-Fi light flashes.
Follow in-app prompts to connect robot to your network.
Name your robot and set preferences.

Tip: Ensure robot is near router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and spot cleaning.

Start cleaning: Press CLEAN on robot, remote, or app.
Select mode: Use app to choose Quiet, Normal, or Max suction.
Room selection: In app, select specific mapped rooms to clean.
Spot clean: Press SPOT to clean a 3x3 foot area.
Schedule: In app, set daily or weekly cleaning times for whole home or specific rooms.
Recharge & resume: Enabled by default; robot returns to dock if battery low, then resumes.
Voice control: Say "Alexa, ask Shark to start cleaning" or similar with Google Assistant.

WARNING! Do not use on wet surfaces. Pick up large debris before running.

Maintenance & Care

Regular maintenance ensures optimal performance.

Task	Frequency	Instructions
Empty robot dustbin	After each cleaning	Press bin release, empty into trash.
Replace base bag	When full indicator lights	Open base lid, remove full bag, insert new bag.
Clean filter	Every month	Tap to remove dust, rinse with water, air dry 24 hours.
Clean brushroll	Every week	Remove brushroll, clear hair and debris.
Clean sensors & charging contacts	Every month	Wipe with dry cloth.
Check side brushes	Every 3-6 months	Replace if worn or damaged.

CAUTION! Unplug base before maintenance. Do not use robot without filter installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com/support or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on charger; ensure contacts are clean.
Robot not connecting to Wi-Fi	Network/placement	Ensure 2.4 GHz network; move robot closer to router; restart robot.
Poor navigation	Dirty sensors/bright light	Clean sensors with dry cloth; avoid direct sunlight on sensors.
Suction power low	Full dustbin/clog	Empty robot dustbin; check for clogs in brushroll and airpath.
Self-empty base not working	Full bag/clog	Replace bag; check hose for obstructions.
Error beeps/lights	Various	Refer to app notification or manual error code chart.

Reset: Hold DOCK and SPOT for 10 seconds to reset Wi-Fi. Use app to reset map if needed.

Service: 1-800-798-7398; sharkclean.com/support