Shark EZ ROBOT RV9114A3US Vacuum Cleaner Manual

The Shark EZ ROBOT RV9114A3US is a self-emptying robot vacuum with Wi-Fi connectivity, home mapping, multi-surface cleaning, and a self-cleaning brushroll. It features a CleanBase™ Automatic Dirt Disposal that holds up to 30 days of dirt, smart sensors for navigation and obstacle avoidance, voice control compatibility, and the SharkClean app for scheduling and control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Emptying 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, CleanBase™ Automatic Dirt Disposal station, charging dock, side brushes, filter, remote control (if included), and power adapter.

Feature	Description
Self-Emptying Base	Automatically empties robot's dustbin into sealed bag
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Home Mapping	Creates smart map of your home for efficient cleaning
Multi-Surface Cleaning	Adjusts suction for carpets and hard floors
Self-Cleaning Brushroll	Reduces hair wrap for pet owners
Voice Control	Works with Alexa and Google Assistant
Boundary Strips	Virtual barriers to restrict cleaning areas
Auto-Recharge & Resume	Returns to dock to charge, then resumes cleaning
Dustbin Full Sensor	Alerts when dustbin needs emptying
HEPA Filtration	Traps dust and allergens

Installation & Setup

Unpack and inspect all contents. Place CleanBase™ on a level surface against a wall.

Assemble CleanBase™: Insert disposable bag into compartment until it clicks.
Charge the robot: Place robot on charging contacts at CleanBase™. Ensure power is connected.
Prepare your home: Clear floor of cords, small objects, and fragile items.
Install side brushes: Attach to bottom of robot by aligning and pressing down.

WARNING! Keep CleanBase™ away from stairs and heated surfaces. Ensure proper ventilation around dock.

First-Time Use

Fully charge robot before first cleaning (approx. 4-6 hours).

Power on: Press CLEAN button on robot or use app.
Initial mapping run: Allow robot to clean entire home to create map.
Set up Wi-Fi: Download SharkClean app and follow in-app instructions.
Name rooms: Use app to label rooms on the map for targeted cleaning.
Set schedules: Create cleaning schedules in app for automatic daily/weekly cleaning.

CAUTION! Do not pick up or move robot during initial mapping. Ensure cliff sensors are clean.

Specifications

Model: Shark EZ ROBOT RV9114A3US
Type: Self-emptying robot vacuum with CleanBase™
Dust Capacity: Up to 30 days (sealed bag in CleanBase™)
Suction Power: Adjustable for carpets and hard floors
Battery: Lithium-ion, auto-recharge
Connectivity: 2.4 GHz Wi-Fi, SharkClean app
Voice Control: Amazon Alexa, Google Assistant
Filtration: HEPA filter
Cleaning Modes: Auto, Spot, Room, Manual
Power Source: 120V AC, 60Hz

Controls and Settings

Robot Controls: CLEAN (start/pause), DOCK (return to base), SPOT (clean concentrated area). CleanBase™: POWER indicator, bag full indicator.

SharkClean App: Start/stop cleaning, select rooms, set schedules, view cleaning history, adjust suction, create no-go zones.

Settings: Suction power (Eco, Normal, Max), cleaning mode (Auto, Room, Spot), scheduling (daily, weekly), map management (save, edit, label rooms), voice control setup.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and smartphone.

Download "SharkClean" app from App Store or Google Play.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot for 3 seconds until Wi-Fi light flashes.
Follow in-app prompts to connect robot to your home network.
Name your robot and sync with home map.

Tip: Ensure robot is near router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for customized cleaning.

Auto Mode: Robot cleans entire mapped area using smart navigation.
Room Select: Choose specific rooms to clean via app.
Spot Cleaning: Robot spirals outward to clean a 3-foot diameter area.
Manual Control: Use app as joystick to drive robot manually.
Scheduling: Set daily or weekly cleaning schedules in app.
Boundary Setting: Use app to draw no-go zones or use physical boundary strips.
Voice Commands: "Alexa, ask Shark to start cleaning" or "Hey Google, tell Shark to clean kitchen."

WARNING! Do not use on wet surfaces. Pick up large debris before cleaning.

Maintenance & Emptying

Regular maintenance ensures optimal performance.

Empty Dustbin: Robot automatically empties into CleanBase™. Replace bag when indicator light turns red.
Clean Brushes: Remove and clean side brushes and self-cleaning brushroll weekly.
Clean Sensors: Wipe cliff sensors and charging contacts with dry cloth.
Filter Care: Tap out HEPA filter monthly; replace every 6-12 months.
Clean Wheels: Remove hair and debris from wheels.

Care & Cleaning

Unplug CleanBase™ before maintenance. Use dry cloth to clean exterior; no liquids.

CAUTION! Do not wash filter or brushes with water unless specified as washable. Keep away from moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device complies with Industry Canada license-exempt RSS standard(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts/misaligned	Clean charging contacts on robot and dock; ensure proper alignment.
Robot not connecting to Wi-Fi	Network/software	Ensure 2.4 GHz network; restart robot and router; reinstall app.
Poor cleaning performance	Full dustbin/clogged brushes	Empty dustbin; clean brushes and filter; check for blockages.
Robot getting stuck	Obstacles/cluttered floor	Clear floor of cords and small objects; use boundary strips.
CleanBase™ not emptying robot	Full bag/blockage	Replace bag; check hose for clogs; ensure robot is properly seated.
Map not saving	Robot moved/interrupted	Do not move robot during cleaning; run complete mapping cycle.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; sharkclean.com