Shark EZ ROBOT RV9113A1US Vacuum Cleaner Manual

The Shark EZ ROBOT RV9113A1US is a self-emptying robot vacuum with Wi-Fi connectivity, smart home integration, and a self-cleaning brushroll. It features a Clean Base™ Automatic Dirt Disposal that holds up to 30 days of dirt, Matrix™ Grid Navigation for efficient cleaning, and voice control compatibility with Amazon Alexa and Google Assistant. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Configuration 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi & App 7. Cleaning Modes and Scheduling 8. Maintenance and Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Clean Base™ Automatic Dirt Disposal, charging dock, dual side brushes, filter, and remote control.

Feature	Description
Clean Base™ Automatic Dirt Disposal	Self-empties dustbin; holds 30 days of dirt
Matrix™ Grid Navigation	Systematic cleaning with row-by-row coverage
Self-Cleaning Brushroll	Anti-hair wrap technology
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
Dual Side Brushes	For corner and edge cleaning
High-Efficiency Filter	Captures dust and allergens
Recharge & Resume	Automatically returns to dock to recharge and resumes cleaning
Boundary Strips	Virtual no-go zones (included)
Spot Clean	Intensive cleaning of a concentrated area

Unpacking and Setup

Unpack and inspect all contents. Place Clean Base™ on a level surface against a wall.

Install Clean Base™: Plug power cord into outlet and dock. Ensure area is clear (4 ft front, 2 ft sides).
Prepare robot: Remove protective films. Install side brushes by pressing onto tabs.
Charge robot: Place robot on charging contacts at Clean Base™. Initial charge takes about 6 hours.
Clear cleaning area: Pick up loose cords, small objects, and secure rug tassels.

WARNING! Keep dock and robot away from stairs and wet areas to prevent falls and damage.

First-Time Configuration

Power on robot; follow app prompts for setup.

Download SharkClean app: Available on iOS and Android.
Create account: Register with email.
Connect to Wi-Fi: Press and hold DOCK and SPOT buttons on robot until Wi-Fi light flashes. Follow in-app instructions.
Name your robot: Assign a unique name in app.
Test run: Start a cleaning cycle to ensure proper navigation.

CAUTION! Do not place Clean Base™ in direct sunlight or near heat sources.

Specifications

Model: RV9113A1US
Type: Self-Emptying Robot Vacuum
Dustbin Capacity: 0.2 gal (robot), 1.3 gal (Clean Base™ bag)
Run Time: Up to 90 minutes per charge
Charging Time: Approx. 6 hours (full)
Navigation: Matrix™ Grid Navigation with sensors
Connectivity: 2.4 GHz Wi-Fi only
Voice Control: Amazon Alexa, Google Assistant
Filter: Washable high-efficiency filter
Power Source: 120V AC, 60Hz

Controls and Indicators

Access controls via physical buttons, remote, or SharkClean app.

Robot Buttons: CLEAN (power/start), DOCK (return to base), SPOT (spot clean).

Clean Base™ Indicators: Power (solid blue), Status (flashing if bag full/error).

App Controls: Start/stop, schedule, select mode (Quiet, Normal, Max), view cleaning history, set no-go zones.

Remote: Directional arrows, CLEAN, DOCK, SPOT, mode selection.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Enable robot Wi-Fi mode: Hold DOCK + SPOT until light flashes.
Open app, tap "+" to add device.
Select your Wi-Fi network and enter password.
Wait for connection confirmation (solid blue light).

Tip: Ensure robot is close to router during setup. Disable VPN if connection fails.

Cleaning Modes and Scheduling

Supports multiple cleaning modes and scheduling via app.

Start cleaning: Press CLEAN on robot or app, or use voice command.
Modes: Quiet (low noise), Normal (balanced), Max (deep clean).
Spot Clean: Press SPOT for focused 2x2 ft area cleaning.
Schedule: In app, set daily/weekly cleaning times.
Boundary strips: Place physical strips to block off areas.
Recharge & Resume: Enabled by default; robot returns to charge and resumes where it left off.
Manual control: Use remote or app directional pad to steer.

WARNING! Do not pick up or move robot during cleaning cycle.

Maintenance and Care

Regular maintenance ensures optimal performance.

Task	Frequency	Instructions
Empty robot dustbin	After each cleaning	Press release button, empty into trash.
Replace Clean Base™ bag	When full indicator lights	Pull out old bag, insert new one.
Clean filter	Every month	Tap out dust, rinse with water, air dry 24 hrs.
Clean brushes	Every week	Remove brushroll and side brushes, clear debris.
Clean sensors and charging contacts	Every month	Wipe with dry cloth.
Check wheels for obstructions	Every month	Remove hair or string wrapped around wheels.

CAUTION! Unplug Clean Base™ before maintenance. Do not use damaged bags.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Ensure robot is properly seated on charger; wait for full charge.
Wi-Fi connection failed	Wrong network/weak signal	Use 2.4 GHz network; move robot closer to router; restart robot and app.
Robot stuck or lost	Obstacles/low light	Clear path; ensure room is well lit; use boundary strips.
Clean Base™ not emptying	Full bag/clog	Replace bag; check hose for blockages.
Poor suction	Full dustbin/dirty filter	Empty dustbin; clean or replace filter.
Error lights flashing	Brush stuck/wheel issue	Clear brushroll and wheels; restart robot.

Reset: Hold CLEAN and DOCK for 10 seconds to reset Wi-Fi settings.

Service: 1-888-228-5531; sharkclean.com/support