Shark EVOPOWER LC300SM Series Vacuum Cleaner Manual

The Shark EVOPOWER LC300SM Series is a high-performance cordless stick vacuum cleaner featuring a powerful digital motor, DuoClean PowerFins brushroll, Anti-Allergen Complete Seal technology, LED headlights, and a removable battery. It offers multiple cleaning modes, a versatile wand, and a self-cleaning brushroll. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main body with motor and dust cup, Removable battery, Charging dock, Wand, DuoClean PowerFins floor nozzle, Crevice tool, Upholstery tool, Duster brush.

FeatureDescription
Digital MotorHigh-torque, powerful suction for deep cleaning
DuoClean PowerFinsSelf-cleaning brushroll for hair and debris pickup
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates hidden dirt under furniture
Removable BatteryUp to 60 minutes of runtime; quick-charge capability
Multi-Surface CleaningAutomatically adjusts suction for carpets and hard floors
Wand Release ButtonQuickly detach wand for handheld use
Dust Cup Empty SystemOne-touch, hygienic emptying
Charging DockWall-mountable for convenient storage and charging
Self-Cleaning BrushrollReduces hair wrap for maintenance-free operation

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

  1. Insert the battery: Align battery with slot on main body until it clicks into place.
  2. Attach the wand: Insert wand into main body until it locks.
  3. Attach floor nozzle: Connect DuoClean nozzle to the wand until it clicks.
  4. Mount charging dock: Use included screws to mount dock on wall near outlet.
  5. Charge the vacuum: Place vacuum on dock; charging indicator will light up.

WARNING! Ensure vacuum is turned off during assembly. Keep fingers away from moving parts.

First-Time Use

Fully charge battery before first use (approx. 4 hours).

  1. Power on: Press POWER button on handle.
  2. Select mode: Use MODE button to cycle through Eco, Normal, and Boost settings.
  3. Begin cleaning: Push vacuum forward on floor; unit will automatically adjust suction.
  4. Empty dust cup: Press release button when full; hold over trash can.
  5. Switch to handheld: Press wand release button and attach desired tool.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Controls and Settings

Main controls located on handle and body.

Handle: POWER button, MODE selector (Eco/Normal/Boost), Wand release button.

Body: Battery release latch, Dust cup release button, Brushroll access button.

Modes: Eco (extended runtime, lower suction), Normal (balanced cleaning), Boost (max suction for deep cleaning). Indicators: Battery LED (green=charged, red=low, flashing=charging), Brushroll alert (flashes if clogged).

Cleaning Modes & Attachments

Use appropriate attachment for each surface.

  1. Hard floors: Use DuoClean nozzle in Normal mode.
  2. Carpets: Use Boost mode for deep cleaning.
  3. Above-floor cleaning: Detach wand; attach crevice tool, upholstery tool, or duster brush.
  4. Furniture: Use upholstery tool with gentle suction.
  5. Corners & edges: Crevice tool for tight spaces.

Tip: Regularly check and clean brushroll to maintain optimal performance.

Maintenance & Care

Regular maintenance ensures peak performance and longevity.

  1. Empty dust cup after each use.
  2. Clean filter monthly: Remove, tap out debris, rinse under cold water, air dry 24 hours.
  3. Clear brushroll: Press access button to remove nozzle; cut away wrapped hair/debris.
  4. Check for blockages: Inspect wand, hose, and nozzle if suction decreases.
  5. Store on charging dock to keep battery charged.

WARNING! Unplug charger and turn off vacuum before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not charged/insertedCharge battery fully; ensure it's properly clicked into place.
Reduced suctionFull dust cup/clogged filter/blockageEmpty dust cup; clean filter; check wand and nozzle for obstructions.
Brushroll not spinningHair/debris wrapTurn off, remove nozzle, clear brushroll of tangled material.
Battery not chargingDirty contacts/faulty dockClean battery and dock contacts with dry cloth; ensure dock is plugged in.
Vacuum turns off during useOverheating/low batteryAllow to cool for 45 minutes; recharge battery.

Reset: Remove battery for 10 seconds, then reinsert.

Service: 1-800-798-7398; www.sharkclean.com

Shark EVOPOWER LC300SM Series Vacuum Cleaner Manual © - All Rights Reserved 2025