Shark EVOPOWER LC200SM Series Vacuum Cleaner Manual

The Shark EVOPOWER LC200SM Series is a high-performance cordless vacuum cleaner featuring powerful suction, a lightweight design, multiple cleaning modes, a HEPA filtration system, LED headlights, a removable battery, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motor unit with HEPA filter, Removable battery, Charging dock, Crevice tool, Dusting brush, Upholstery tool, Multi-surface floor nozzle.

Feature	Description
Powerful Suction	EVOPOWER motor technology for deep cleaning
Cordless Design	Lightweight and maneuverable for whole-home cleaning
Removable Battery	Lithium-ion battery with up to 40 minutes runtime
HEPA Filtration	Captures 99.9% of dust and allergens
LED Headlights	Illuminates hidden dirt on floors and under furniture
Multiple Cleaning Modes	ECO, NORMAL, and BOOST modes for different surfaces
Washable Dust Cup	Easy-to-empty and clean
Wall-Mount Charging Dock	For convenient storage and charging
POWER Button	Turns vacuum on/off and cycles through modes
Battery Indicator	LED display shows remaining battery life

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert the handle into the main body until it clicks securely.
Install the battery: Slide the battery into the compartment until it locks.
Attach cleaning tool: Connect the floor nozzle or desired attachment to the wand.
Mount the charging dock: Secure to wall using included screws and anchors.
Charge the vacuum: Place vacuum on dock; initial charge takes 4 hours.

WARNING! Ensure all parts are securely connected before use. Do not force connections.

First-Time Use

Fully charge the vacuum before first use.

Power on: Press the POWER button; LED indicator will light up.
Select cleaning mode: Press POWER repeatedly to cycle through ECO, NORMAL, BOOST.
Begin cleaning: Use slow, overlapping passes for best results.
Empty dust cup: Press release button to remove and empty when full.
Recharge: Return vacuum to charging dock after use.

CAUTION! Do not use on wet surfaces or to pick up liquids.

Specifications

Model: EVOPOWER LC200SM Series.
Power Source: Rechargeable lithium-ion battery.
Runtime: Up to 40 minutes (ECO mode).
Charging Time: 4 hours for full charge.
Filtration: HEPA filter, washable.
Dust Cup Capacity: 0.7 liters.
Weight: 5.5 lbs (2.5 kg).
Noise Level: ≤75 dB.
Included Attachments: Crevice tool, dusting brush, upholstery tool, multi-surface floor nozzle.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle. POWER Button: Turns vacuum on/off, cycles through ECO, NORMAL, BOOST modes. Battery Indicator: 4 LED lights show charge level (25% per light).

Cleaning Modes: ECO for extended runtime on light dirt, NORMAL for everyday cleaning, BOOST for maximum suction on carpets and heavy dirt.

To check battery: Press battery indicator button. To reset filter indicator: Hold POWER and battery button for 3 seconds.

Attachments & Accessories

Use appropriate attachment for each cleaning task.

Multi-surface floor nozzle: For carpets and hard floors.
Crevice tool: For tight spaces, corners, and between cushions.
Dusting brush: For delicate surfaces, shelves, and blinds.
Upholstery tool: For sofas, chairs, and stairs.

Tip: Ensure attachment is clicked firmly into place before use.

Cleaning Modes

Optimize cleaning based on surface and dirt level.

ECO Mode: For light cleaning and extended battery life.
NORMAL Mode: Balanced cleaning for daily use.
BOOST Mode: Maximum suction for deep cleaning carpets.
To switch modes: Press POWER button while vacuum is running.
LED indicator: Shows current mode (Green=ECO, Blue=NORMAL, Red=BOOST).

WARNING! Do not run in BOOST mode continuously for more than 10 minutes to prevent overheating.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Clean filter monthly: Remove, tap out debris, rinse with cold water, air dry 24 hours.
Check brush roll: Remove hair and debris regularly.
Clean sensors and charging contacts with dry cloth.
Store in dry place, away from extreme temperatures.

CAUTION! Do not use vacuum without filter. Ensure filter is completely dry before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery not charged	Charge for 4 hours; ensure vacuum is properly docked.
Reduced suction	Full dust cup or clog	Empty dust cup; check hose and nozzle for blockages.
Battery drains quickly	Old battery or BOOST mode overuse	Use ECO mode; replace battery if older than 3 years.
Brush roll not spinning	Debris tangled	Turn off, unplug, and remove debris from brush roll.
Vacuum won't charge	Dirty contacts or faulty dock	Clean charging contacts; ensure dock is properly powered.

Reset: Remove battery for 30 seconds, then reinsert.

Service: 1-800-798-7398; www.sharkclean.com