Shark EVOPOWER CS601PH Series Vacuum Cleaner Manual

The Shark EVOPOWER CS601PH Series is a powerful cordless stick vacuum cleaner featuring a lightweight design, EVOPOWER brushroll technology for deep carpet cleaning, DuoClean floor nozzle for hard floors and carpets, Anti-Allergen Complete Seal with HEPA filter, LED headlights, multiple cleaning modes, and a removable battery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, DuoClean floor nozzle, EVOPOWER brushroll, Crevice tool, Dusting brush, Upholstery tool, Charging dock, and HEPA filter.

Assembly & Setup

Unpack and inspect all contents. Ensure all parts are present.

1. Attach the handle: Insert the handle into the main body until it clicks securely.
2. Attach the floor nozzle: Align the nozzle with the vacuum body and push until it locks.
3. Install the battery: Insert the battery into the slot on the vacuum until it clicks.
4. Charge the vacuum: Place the vacuum on the charging dock or plug the charger directly into the vacuum.
5. Attach accessories: Store crevice tool, dusting brush, and upholstery tool on the onboard caddy.

WARNING! Do not use the vacuum if any parts are damaged. Ensure all connections are secure before operation.

First-Time Use

Fully charge the vacuum before first use.

1. Power on: Press the power button located on the handle.
2. Select cleaning mode: Use the mode button to cycle through Eco (for longer runtime), Normal (for everyday cleaning), and Boost (for maximum suction on carpets).
3. Begin cleaning: Push the vacuum forward on the floor. The brushroll will engage automatically.
4. Use attachments: Detach the floor nozzle and attach desired tools for above-floor cleaning.
5. Empty the dust cup: Press the release button to remove the dust cup and empty contents into trash.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model Series: EVOPOWER CS601PH.
• Type: Cordless Stick Vacuum.
• Power Source: Rechargeable Lithium-ion Battery.
• Voltage: 25.2V.
• Run Time: Up to 60 minutes (Eco mode), 30 minutes (Normal), 15 minutes (Boost).
• Charging Time: Approximately 4 hours for full charge.
• Filtration: Anti-Allergen Complete Seal with HEPA Filter.
• Dust Cup Capacity: 0.7 quarts.
• Weight: 7.5 lbs.
• Included Tools: Crevice Tool, Dusting Brush, Upholstery Tool.

Controls and Modes

Main controls located on the handle.

Power Button: Turns vacuum on/off. Mode Button: Cycles through Eco, Normal, Boost. Brushroll On/Off: Button to disable brushroll for hard floors. Battery Indicator: LED lights show remaining charge.

Cleaning Modes: Eco (extended runtime, lower suction), Normal (balanced cleaning), Boost (maximum suction for deep cleaning). Brushroll Control: Can be turned off for delicate rugs or to suction hard debris. LED Headlights: Automatically turn on when vacuum is powered.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

1. DuoClean Floor Nozzle: For carpets and hard floors. Automatically adjusts.
2. Crevice Tool: For tight spaces, corners, and along edges.
3. Dusting Brush: For delicate surfaces, blinds, shelves, and electronics.
4. Upholstery Tool: For sofas, chairs, stairs, and car interiors.

Tip: Ensure the vacuum is turned off before changing attachments.

Cleaning Operations

Optimize cleaning for different surfaces.

1. Hard Floors: Use Normal or Eco mode. Ensure brushroll is on for agitation.
2. Carpets & Rugs: Use Boost mode for deep cleaning. For delicate rugs, turn brushroll off.
3. Above-Floor Cleaning: Detach floor nozzle, attach desired tool, and use handheld mode.
4. Emptying Dust Cup: Hold over trash, press release latch, and empty. Do not overfill.
5. Clearing Clogs: If suction reduces, turn off vacuum, disconnect nozzle, and check hose and inlet for blockages.

WARNING! Do not vacuum wet spills, large objects, or hot ashes. Do not use on wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty Dust Cup: After each use or when full.
2. Clean Filters: Rinse HEPA filter and pre-motor filter with cold water every 3 months. Air dry completely for 24 hours before reinstalling.
3. Clean Brushroll: Regularly remove hair and debris wrapped around brushroll. Use scissors if necessary.
4. Check for Blockages: Inspect hose, nozzle, and inlet periodically.
5. Wipe Exterior: Use a dry or damp cloth. Do not use harsh chemicals.

CAUTION! Ensure all parts are completely dry before reassembling and using the vacuum.

Battery & Charging

Use only the provided charger and battery.

1. Charging: Place vacuum on dock or plug charger directly. Battery indicator will flash while charging.
2. Battery Care: For longest life, store in a cool, dry place. Avoid complete discharge.
3. Battery Replacement: Press the battery release button to remove. Insert new battery until it clicks.
4. Storage: If not using for extended periods, store with battery at 50% charge.

WARNING! Do not expose battery to fire, water, or extreme temperatures. Do not use damaged batteries.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Reset: Turn vacuum off and on. Remove and reinsert battery if issues persist.

Service: 1-800-798-7398; sharkclean.com