Shark EURO-PRO SV7729 Vacuum Cleaner Manual

The Shark EURO-PRO SV7729 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brush roll, multiple height adjustments, a large-capacity dust cup, HEPA filtration, a telescoping wand, and various attachments for above-floor cleaning. Powered by a standard 120V AC outlet. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Motorized brush roll, Telescoping wand, Dust cup with HEPA filter, Crevice tool, Upholstery tool, Dusting brush.

FeatureDescription
Motorized Brush RollDeep cleans carpets and agitates embedded dirt
Height AdjustmentMultiple settings for different carpet pile heights and hard floors
Large Capacity Dust CupEasy-to-empty, bagless design
HEPA Filtration SystemTraps 99.9% of dust and allergens
Telescoping WandExtends for ceiling and high-reach cleaning
Crevice ToolFor tight spaces and corners
Upholstery ToolGentle cleaning for furniture and curtains
Dusting BrushSoft bristles for delicate surfaces
ON/OFF SwitchPowers the vacuum on and off
Brush Roll On/OffDisengages brush roll for hard floor cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

  1. Attach the handle: Align the handle with the body and secure with provided screws.
  2. Install the telescoping wand: Insert into the wand holder until it clicks.
  3. Attach cleaning tools: Store tools on onboard caddy or attach to wand as needed.
  4. Plug into a standard 120V AC power outlet.

WARNING! Ensure all parts are securely fastened before use. Keep fingers away from brush roll during assembly.

First-Time Use

Before first use, perform a quick check and setup.

  1. Check height setting: Adjust to match your floor type (low for bare floors, high for thick carpets).
  2. Empty dust cup: Ensure it is empty and filter is properly seated.
  3. Power on: Press the ON/OFF switch; listen for normal motor sound.
  4. Test brush roll: Engage/disengage to ensure proper function.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Ensure cord is fully unwound from storage.

Specifications

Controls and Settings

Main controls located on the handle and body.

Handle: ON/OFF switch, Brush Roll On/Off button, Height adjustment lever.

Settings: Height adjustment (multiple settings for carpet/floor), Brush Roll On/Off (for carpets vs. hard floors), Suction power (single speed on this model). For above-floor cleaning: Attach wand and tool, brush roll automatically disengages.

Using Attachments

For above-floor cleaning: stairs, furniture, ceilings, blinds.

  1. Turn vacuum off and unplug from outlet.
  2. Detach the hose from the dock (if applicable).
  3. Connect desired tool (crevice, upholstery, dusting brush) to the wand or hose end.
  4. Plug in, turn on, and begin cleaning.

Tip: For best suction, ensure attachments are clicked securely into place.

Cleaning Modes

Designed for carpets, hard floors, and above-floor surfaces.

  1. Carpet Mode: Set height adjustment to match pile. Ensure brush roll is ON.
  2. Hard Floor Mode: Set to lowest height setting. Turn brush roll OFF to prevent scattering debris.
  3. Above-Floor Mode: Use telescoping wand with attachments. Brush roll automatically disengages.

WARNING! Always turn off and unplug before changing modes or attachments.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

  1. Empty Dust Cup: Press release button, remove cup, empty into trash. Do not overfill.
  2. Clean Filters: Remove HEPA filter and pre-motor filter monthly. Rinse with cold water, air dry completely for 24 hours before reinstalling.
  3. Check Brush Roll: Regularly remove hair and string wrapped around brush roll. Use scissors if necessary.
  4. Inspect Hose & Wand: Clear any blockages.

CAUTION! Never use vacuum without filters installed. Ensure all parts are completely dry before reassembly.

Regulatory Information

This appliance complies with relevant safety standards. Copyright © [Year] SharkNinja Operating LLC. EURO-PRO and Shark are registered trademarks. For customer service, support, or to purchase accessories, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower outlet, cord, switchCheck outlet; ensure plug is secure; check ON/OFF switch.
Loss of suctionFull dust cup, clogged filter or hoseEmpty dust cup; check and clean filters; clear hose/wand blockage.
Brush roll not spinningObstruction, belt, settingTurn off and unplug. Remove debris from brush roll; check if brush roll is set to OFF for hard floors.
Vacuum is overheatingClogged filter, full dust cupTurn off and let cool. Empty dust cup and clean filters. Check for blockages.
Unusual noiseForeign object in brush roll or hoseTurn off and unplug. Inspect brush roll chamber and hose for obstructions.

Reset: If motor overheats, it may have a thermal cutoff. Unplug, let cool for 60 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com

Shark EURO-PRO SV7729 Vacuum Cleaner Manual © - All Rights Reserved 2025