Shark EP923F Vacuum Cleaner Manual

The Shark EP923F is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large dust cup capacity, swivel steering for maneuverability, multiple cleaning modes for carpets and hard floors, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with DuoClean brushroll, Handle with controls, Dust cup with release, Power cord, Attachments (crevice tool, dusting brush, upholstery tool).

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach handle: Insert handle into main body until it clicks into place.
2. Install dust cup: Ensure dust cup is properly seated and locked.
3. Attach hose and wand: Connect hose to vacuum body and wand to hose.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug in vacuum; turn on power.

1. Select cleaning mode: Use handle control to choose Carpet, Hard Floor, or Bare Floor.
2. Adjust height: For carpets, ensure brushroll is at correct height for optimal cleaning.
3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
4. Use attachments: For above-floor cleaning, detach wand and attach desired tool.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark EP923F.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Power: High-performance motor with adjustable suction.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Filters: Washable pre-motor and post-motor filters.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 15 lbs.
• Power Source: 120V AC, 60Hz.

Controls and Settings

Handle controls: Power button, Mode selector (Carpet/Hard Floor/Bare Floor).

Indicator Lights: LED headlights, Filter check indicator.

Cleaning Modes: Carpet mode for deep cleaning, Hard Floor for sealed surfaces, Bare Floor for delicate floors. Suction Control: Adjustable via mode selector. Brushroll On/Off: Automatically adjusts based on mode.

Using Attachments

For above-floor cleaning: Detach wand and attach tools.

1. Turn off vacuum and unplug before changing attachments.
2. Crevice tool: For tight spaces, corners, and edges.
3. Dusting brush: For delicate surfaces, shelves, and blinds.
4. Upholstery tool: For sofas, chairs, and stairs.
5. Reattach wand: Ensure it clicks into place securely.

Tip: Store attachments on vacuum or in provided caddy for easy access.

Cleaning Modes

Select mode based on floor type.

1. Carpet Mode: Activates brushroll for deep carpet cleaning.
2. Hard Floor Mode: Adjusts brushroll for sealed hard surfaces.
3. Bare Floor Mode: Lifts brushroll to protect delicate floors.
4. Manual adjustment: Use handle control to switch modes as needed.

WARNING! Do not use carpet mode on bare floors; may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full, press release button and empty into trash.
2. Clean filters: Remove and wash pre-motor and post-motor filters monthly.
3. Check brushroll: Remove debris and hair regularly.
4. Inspect hose and attachments: Clear any blockages.

CAUTION! Unplug vacuum before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; www.sharkclean.com