Shark EP750ST Vacuum Cleaner Manual

The Shark EP750ST is a powerful upright vacuum cleaner with advanced swivel steering, multi-surface brushroll, lift-away capability, HEPA filtration, and anti-allergen complete seal technology. It features multiple cleaning modes, a large dust cup, LED headlights, and various attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, lift-away pod, swivel steering handle, multi-surface brushroll, HEPA filter, dust cup, crevice tool, dusting brush, upholstery tool, and power cord.

Feature	Description
Swivel Steering	360-degree maneuverability for easy navigation
Lift-Away Pod	Detachable canister for above-floor cleaning
Multi-Surface Brushroll	Automatically adjusts for carpets and hard floors
HEPA Filtration	Captures 99.9% of dust and allergens
Anti-Allergen Complete Seal	Prevents allergens from escaping during vacuuming
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, no-touch dirt disposal
POWER/SURFACE Switch	Selects cleaning mode (Carpet/Hard Floor)
BRUSHROLL ON/OFF	Enables/disables brushroll rotation
POWER Cord Wrap	Integrated cord storage hooks

Assembly Instructions

Unpack and inspect all components. Assemble on a flat surface.

Attach handle: Align handle with upright body until it clicks into place.
Install hose: Connect hose to lift-away pod and secure with locking mechanism.
Attach wand: Insert extension wand into hose until it locks.
Attach tools: Store crevice tool, dusting brush, and upholstery tool on dock.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Setup

Plug in vacuum; perform initial check.

Check brushroll: Ensure it rotates freely and is free of obstructions.
Install filters: Insert HEPA filter and pre-motor filter as indicated.
Test suction: Turn on POWER switch to verify operation.
Adjust height: Set floor selector to appropriate surface (carpet/hard floor).
Test attachments: Connect each tool to ensure proper fit.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll during operation.

Specifications

Model: Shark EP750ST.
Power: 120V AC, 60Hz, 12 Amps.
Suction Power: Advanced cyclonic suction technology.
Filtration: HEPA filter with anti-allergen complete seal.
Cord Length: 30 feet.
Dust Cup Capacity: 1.5 dry quarts.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.
Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Main controls located on handle and body. Handle: POWER/SURFACE switch, BRUSHROLL ON/OFF button. Body: Dust cup release, lift-away release, hose release.

Cleaning Modes: Carpet Mode (brushroll active), Hard Floor Mode (brushroll off/suction only), Above Floor Mode (lift-away pod with attachments).

Settings: Floor selector adjusts brushroll height for carpets. Suction control automatically adjusts based on floor type. LED lights turn on automatically when vacuum is powered.

Using Attachments

Attachments for specialized cleaning: Crevice tool, dusting brush, upholstery tool.

Detach hose: Press hose release button on lift-away pod.
Connect wand: Insert extension wand into hose end.
Attach tool: Click desired tool onto wand end.
Select mode: Use above-floor mode for attachments.
Clean: Move tool over surfaces using back-and-forth motion.

Tip: For delicate surfaces, use dusting brush with gentle strokes.

Cleaning Modes

Three primary cleaning modes for different surfaces.

Upright Mode: For carpets and large floor areas. Use POWER/SURFACE switch to select carpet or hard floor.
Lift-Away Mode: Press release button to detach pod. Use for stairs, furniture, and above-floor cleaning.
Handheld Mode: Remove hose and attach tool directly for spot cleaning.
Brushroll Control: Turn brushroll off for delicate rugs or hard floors.
Suction Power: Automatically adjusts; no manual control needed.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when cup is full.
Clean filters: Remove and tap HEPA filter monthly; wash pre-motor filter every 3 months.
Clear brushroll: Cut away wrapped hair/fibers with scissors (unplug first).
Check hose: Remove clogs using long object.
Inspect cord: Look for damage; replace if frayed.

CAUTION! Unplug vacuum before all maintenance. Allow filters to dry completely before reinstalling.

Safety Information

Read all instructions before use. Keep away from children. Do not use outdoors or on wet surfaces. Do not pick up flammable materials. Always turn off and unplug before servicing.

WARNING! Risk of electric shock. Do not immerse in water. Use only Shark-branded replacement parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and brushroll for blockages.
Brushroll not spinning	Obstruction/overheat	Clear hair/debris; wait 45 minutes if overheated.
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; check circuit breaker.
Unusual noise	Foreign object	Turn off immediately; inspect brushroll and hose for objects.
Dust escaping	Filter not installed	Ensure HEPA and pre-motor filters are properly seated.

Reset: Unplug for 60 seconds; plug back in to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com