Shark EP733W Vacuum Cleaner Manual

The Shark EP733W is a powerful upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a swivel steering handle, and a large-capacity dust cup. It is designed for deep cleaning on both carpets and hard floors, capturing dust and allergens. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean brush roll, Anti-Allergen Complete Seal filtration, LED headlights, swivel steering, large dust cup, handle controls, and accessory storage.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Slide wand into handle until locked.
3. Attach hose: Connect hose to wand and body ports.
4. Install accessories: Store crevice tool and upholstery brush in caddy.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; turn on power switch.

1. Select floor type: Use floor selector switch for carpet or hard floor.
2. Adjust suction: Use handle controls for desired suction level.
3. Engage brush roll: Press brush roll on/off button for carpet cleaning.
4. Begin cleaning: Push vacuum forward and back in overlapping strokes.
5. Empty dust cup: Press release button when full; dispose of debris.

CAUTION! Keep hair, cords, and small objects away from brush roll.

Specifications

• Model: Shark EP733W.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Filtration: HEPA filter; captures 99.9% of allergens.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Weight: 15 lbs.
• Attachments: Crevice tool, upholstery brush, pet multi-tool.
• Warranty: 5-year limited warranty.

Controls and Settings

Handle controls: Power switch, brush roll on/off, suction control. Body controls: Floor selector, dust cup release, wand release.

Settings: Carpet mode (brush roll on), Hard floor mode (brush roll off), Suction control (Low/High). Accessories: Use wand for above-floor cleaning; attach tools for crevices, upholstery.

LED lights: Automatically turn on when vacuum is powered. Cord wrap: Wrap cord around rear hooks for storage.

Cleaning Modes & Attachments

Use appropriate mode and attachments for different surfaces.

1. Carpets: Set floor selector to carpet; brush roll on for deep cleaning.
2. Hard floors: Set floor selector to hard floor; brush roll off to prevent scattering.
3. Above-floor cleaning: Detach wand; attach crevice tool for tight spaces.
4. Upholstery: Use upholstery brush for furniture and stairs.
5. Pet hair: Use pet multi-tool for removing pet hair from carpets and furniture.

Tip: Regularly check brush roll for tangles; clean as needed.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty after each use.
2. Clean filters: Rinse HEPA filter every 3 months; air dry completely.
3. Check brush roll: Remove hair and debris; cut tangled fibers with scissors.
4. Inspect hose: Clear clogs using long object; ensure airflow.
5. Store properly: Wrap cord; store in dry area.

WARNING! Unplug vacuum before maintenance. Do not use wet filters.

Storage & Handling

Store in cool, dry place. Use cord wrap; detach wand if needed.

CAUTION! Do not store with wet filters; avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com