Shark EP710 Vacuum Cleaner Manual

The Shark EP710 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features advanced suction technology, a HEPA filtration system, multiple cleaning modes, LED headlights, a swivel steering mechanism, and a variety of attachments for above-floor cleaning. Below are key sections covering safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motorized brush roll, HEPA filter, Dust cup, Handle with controls, Swivel head, LED headlights, Attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
Motorized brush roll	Deep cleans carpets and agitates embedded dirt
HEPA filtration system	Captures 99.9% of dust and allergens
Swivel steering	Provides maneuverability around furniture and obstacles
LED headlights	Illuminates dark areas under furniture
Multiple cleaning modes	Carpet, Hard Floor, and Bare Floor settings
Large capacity dust cup	Easy-empty container with one-touch release
Adjustable handle	Folds for compact storage
Attachment holder	Built-in storage for tools on vacuum body
Power cord	25-foot retractable cord with cord wrap
Wand release	Quick-release for above-floor cleaning

Assembly & Setup

Unpack all parts and inspect for damage. Assemble following steps.

Attach handle: Insert handle into main body until it clicks into place.
Install dust cup: Slide dust cup into slot until it locks.
Attach hose: Connect hose to vacuum body and wand.
Install HEPA filter: Remove filter from packaging and insert into filter compartment.
Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brush roll during operation.

First-Time Use

Before first use, charge battery (if cordless model) or plug in corded model.

Select floor type: Use mode selector switch for carpet, hard floor, or bare floor.
Adjust suction: Use suction control dial for delicate rugs or high-pile carpets.
Test attachments: Connect crevice tool or dusting brush for above-floor cleaning.
Empty dust cup: Check dust cup level and empty if full before starting.

CAUTION! Do not vacuum wet surfaces, large objects, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Model: Shark EP710 Upright Vacuum.
Power Source: 120V AC, 60Hz (corded).
Suction Power: Adjustable up to 200 AW.
Filtration: HEPA filter, washable.
Cord Length: 25 feet retractable.
Dust Cup Capacity: 1.5 liters.
Weight: 15 lbs.
Noise Level: ≤75 dB.
Warranty: 5-year limited warranty.
Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Located on handle: Power switch, Suction control dial, Mode selector (Carpet/Hard Floor/Bare Floor), Brush roll on/off.

Indicator Lights: Filter alert, Brush roll jam, Full dust cup.

Suction Control: Adjust for different floor types. Mode Selector: Choose setting for optimal cleaning. Brush Roll Switch: Turn off for hard floors to prevent scattering debris. Handle Release: Button to fold handle for storage. Dust Cup Release: Lever to empty container.

Using Attachments

Attachments stored on vacuum body: Crevice tool, Dusting brush, Upholstery tool, Extension wand.

Turn off vacuum and unplug.
Remove wand: Press wand release button.
Attach tool: Insert tool into wand or hose end.
Select suction setting: Lower suction for delicate surfaces.
Clean above-floor areas: Use tools for furniture, stairs, ceilings.

Tip: Use dusting brush for blinds and shelves; crevice tool for tight spaces.

Cleaning Modes

Three modes for different surfaces.

Carpet Mode: Activates motorized brush roll for deep cleaning.
Hard Floor Mode: Reduces brush roll speed for sealed floors.
Bare Floor Mode: Turns off brush roll; uses suction only.
Manual Mode: Override with suction control dial.
Spot Clean: Use attachment for concentrated cleaning.

WARNING! Do not use carpet mode on bare floors; may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use; press release lever.
Clean filter: Remove HEPA filter monthly; rinse with water, air dry 24 hours.
Check brush roll: Remove hair and debris weekly.
Inspect hose: Clear clogs with long object.
Wipe exterior: Use damp cloth; no harsh chemicals.

CAUTION! Unplug before maintenance. Do not operate without filter.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. ETL listed; meets safety standards. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. Dispose of according to local electronic waste regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and brush roll for blockages.
Brush roll not spinning	Jam/overheat	Turn off; remove debris from brush roll; wait 30 minutes if overheated.
Vacuum shuts off	Filter clog/overheat	Clean filter; allow to cool; check for obstructions.
Unusual noise	Foreign object	Turn off; inspect brush roll, hose, and dust cup for objects.
LED lights not working	Power connection	Ensure vacuum is plugged in; check outlet; reset circuit breaker.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com