Shark EP708 Vacuum Cleaner Manual

The Shark EP708 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features advanced suction technology, a motorized brushroll, multiple height adjustments, a large-capacity dust cup, HEPA filtration, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized brushroll, Suction control, Large-capacity dust cup with HEPA filter, Handle with controls, Hose and wand, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Suction Control	Adjustable for different floor types
Large-Capacity Dust Cup	Easy-to-empty, bagless design
HEPA Filtration	Traps 99.9% of dust and allergens
Handle Controls	Power switch, brushroll on/off, suction adjustment
Hose and Wand	For above-floor cleaning
Crevice Tool	Cleans tight spaces and corners
Upholstery Tool	Gentle cleaning for furniture and curtains
Dusting Brush	Soft bristles for delicate surfaces
Height Adjustment	Multiple settings for various carpet pile heights

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Align handle with main body and secure with provided screws.
Install wand: Insert wand into hose connector until it clicks.
Attach hose: Connect hose to vacuum body and wand.
Install tools: Store attachments on onboard caddy or handle.
Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Keep hands clear of moving parts.

First-Time Use

Before first use, ensure all filters are installed correctly.

Check filters: Ensure HEPA filter and pre-motor filter are in place.
Adjust height: Set brushroll height appropriate for your floor type.
Power on: Plug in, turn power switch to ON.
Select mode: Use suction control for carpets or hard floors.
Begin cleaning: Push vacuum forward and back in overlapping strokes.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model: Shark EP708 Upright Vacuum.
Power: 120V AC, 60Hz, 12 Amps.
Suction Power: Advanced cyclonic suction technology.
Filtration: HEPA filter captures 99.9% of dust and allergens.
Dust Cup Capacity: 1.5 liters.
Cord Length: 25 feet.
Weight: 15 lbs.
Warranty: 5-year limited warranty.
Attachments Included: Crevice tool, upholstery tool, dusting brush.

Controls and Settings

Handle Controls: Power switch, Brushroll on/off, Suction control dial.

Power Switch: Turns vacuum on and off. Brushroll On/Off: Activates/deactivates motorized brushroll for hard floors or delicate rugs. Suction Control: Adjusts suction power (High for carpets, Low for hard floors). Height Adjustment Lever: Located near floor nozzle; adjust for carpet pile height.

LED Indicators: Power on, Brushroll active, Full dust cup alert.

Using Attachments

For above-floor cleaning: detach wand and hose, select appropriate tool.

Turn off vacuum and unplug from outlet.
Detach wand from vacuum body.
Attach desired tool to end of wand or hose.
Plug in vacuum and turn on.
Use tool on upholstery, stairs, ceilings, or tight spaces.

Tip: Store attachments on vacuum caddy for easy access.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Check brushroll monthly: Remove tangled hair or fibers.
Inspect hose and wand: Clear any blockages.
Wipe exterior: Use dry cloth to clean vacuum body.
Store properly: Wind cord around cord hooks; store in dry area.

WARNING! Always unplug vacuum before performing any maintenance.

Emptying the Dust Cup

Empty dust cup when full or after each use for best suction.

Turn off and unplug vacuum.
Press dust cup release button.
Remove dust cup from vacuum body.
Hold over trash can; press bottom release to open door.
Tap gently to remove debris.
Close door and reattach dust cup until it clicks.

CAUTION! Do not overfill dust cup. Empty outdoors if allergic to dust.

Filter Care

Clean filters regularly to maintain suction and air quality.

Pre-motor filter: Remove every 3 months; rinse with cold water; air dry 24 hours.
HEPA filter: Remove every 6-12 months; tap gently to remove dust; do not wash.
Check filter seals: Ensure proper seating to prevent air leaks.

Note: Do not operate vacuum without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; clear hose blockage.
Brushroll not spinning	Tangled debris, belt issue	Turn off, unplug, remove debris; check belt for wear.
Vacuum won't turn on	Power cord, outlet, switch	Check power cord connection; test outlet; ensure switch is ON.
Unusual noise	Foreign object in brushroll or hose	Turn off immediately; inspect brushroll and hose for obstructions.
Overheating	Clogged filters, blocked airflow	Clean filters; check for blockages; let vacuum cool for 30 minutes.

Reset: Unplug vacuum for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com