Shark EP662 Vacuum Cleaner Manual

The Shark EP662 is a powerful upright vacuum cleaner featuring a multi-surface brushroll, advanced swivel steering, Lift-Away functionality for portable cleaning, HEPA filtration, and multiple cleaning modes. It includes various attachments for above-floor cleaning, a large dust cup with easy-empty system, and is designed for residential use. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Assembly 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away pod, motorized floor nozzle, wand, crevice tool, dusting brush, upholstery tool, and power cord.

Feature	Description
Multi-Surface Brushroll	Automatically adjusts between carpets and hard floors
Lift-Away Functionality	Detachable pod for portable cleaning above floors
Advanced Swivel Steering	Maneuvers easily around furniture and obstacles
HEPA Filtration System	Captures 99.9% of dust and allergens
Large Dust Cup	Easy-empty system with no-touch disposal
Cleaning Modes	Carpet, Hard Floor, and Bare Floor settings
Power Cord	25-foot retractable cord for extended reach
Attachments	Crevice tool, dusting brush, upholstery tool included
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disables brushroll for delicate surfaces

Unpacking and Assembly

Unpack and inspect all contents. Assemble on a flat surface.

Attach wand: Insert wand into upright body until it clicks into place.
Connect floor nozzle: Align nozzle with wand connector and push until secure.
Install attachments: Store crevice tool, dusting brush, and upholstery tool on dock.
Unwrap power cord: Fully extend cord from cord wrap.

WARNING! Vacuum is heavy; lift with care to avoid back injury. Ensure all connections are secure before use.

First-Time Setup

Plug into electrical outlet; prepare for first use.

Check filters: Ensure both pre-motor and post-motor filters are installed.
Adjust height setting: Set floor selector to appropriate surface (Carpet/Hard Floor).
Test suction: Turn on power switch to verify operation.
Practice Lift-Away: Detach pod by pressing release button to familiarize with portable mode.

CAUTION! Ensure vacuum is unplugged during assembly and filter checks.

Specifications

Model: Shark EP662 Upright Vacuum.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet retractable.
Dust Cup Capacity: 1.5 dry quarts.
Filtration: HEPA filter with anti-allergen complete seal.
Cleaning Path: 12-inch wide nozzle.
Weight: 15.2 lbs.
Attachments: Crevice tool, dusting brush, upholstery tool.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Brushroll on/off button. Body: Floor selector switch, Lift-Away release button, Cord rewind pedal.

Settings: Floor selector (Carpet/Hard Floor), Suction control (High/Low for delicate rugs), Brushroll on/off (for hard floors or drapes).

LED indicators: Power on, Brushroll active, Full dust cup alert. Use settings to optimize cleaning for different surfaces.

Using Attachments

For above-floor cleaning: Use Lift-Away mode with attachments.

Detach pod: Press Lift-Away release button and lift pod from dock.
Connect wand: Extend wand from pod if needed.
Choose attachment: Attach crevice tool, dusting brush, or upholstery tool to wand end.
Clean: Turn on power switch; guide tool over surfaces.

Tip: Use dusting brush for blinds and shelves; crevice tool for tight spaces; upholstery tool for furniture.

Cleaning Modes

Supports multiple cleaning configurations.

Upright Mode: For floor cleaning with motorized brushroll.
Lift-Away Mode: Detach pod for stairs, furniture, and above-floor areas.
Handheld Mode: Remove wand and use pod with short hose for quick cleanups.
Bare Floor Setting: Turn off brushroll to prevent scattering debris.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; hold over trash; push bottom opener.
Clean filters: Rinse pre-motor and post-motor filters monthly; air dry 24 hours.
Clear brushroll: Turn off and unplug; remove nozzle; cut away hair and fibers.
Check blockages: Inspect hose, wand, and nozzle for clogs if suction reduces.

CAUTION! Always unplug vacuum before performing maintenance.

Care & Storage

Unplug and cool before storing. Wrap cord securely; store in dry area.

CAUTION! Do not store with wet filters; avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power outlet/cord	Check outlet; ensure cord is plugged in; inspect for damage.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Obstruction/setting	Clear brushroll of debris; ensure Brushroll is set to ON.
Vacuum overheats	Clogged filters	Clean or replace filters; allow vacuum to cool for 60 minutes.
Unusual noise	Foreign object	Turn off and unplug; inspect brushroll and hose for obstructions.

Reset: Unplug for 60 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com