Shark EP661C Vacuum Cleaner Manual

The Shark EP661C is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brush roll, multiple suction settings, a large-capacity dust cup, HEPA filtration, swivel steering for maneuverability, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Motorized brush roll, Suction control, Large dust cup with quick-release, HEPA filter, Swivel steering handle, Hose with wand, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
Motorized brush roll	Deep cleans carpets and agitates embedded dirt
Suction control dial	Adjusts power for different floor types (carpet/hard floor)
Large dust cup	Holds debris; easy-empty mechanism
HEPA filtration	Traps 99.9% of dust and allergens
Swivel steering	Provides tight turning around furniture
Quick-release hose	For above-floor cleaning with attachments
Crevice tool	Cleans tight spaces and corners
Upholstery tool	Gentle cleaning for furniture and stairs
Dusting brush	Soft bristles for shelves and delicate surfaces
Power button	Turns vacuum on/off

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into base until it clicks securely.
Install hose: Connect hose to port on back of vacuum; ensure it locks.
Attach wand: Insert wand into hose end; twist to lock.
Mount attachments: Store crevice tool, upholstery tool, and dusting brush on provided clips.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before cleaning, perform initial setup.

Check filters: Ensure HEPA and pre-motor filters are properly seated.
Adjust height: Set brush roll height appropriate for floor type (carpet/hard floor).
Select suction: Turn dial to desired setting (Low for hard floors, High for carpets).
Power on: Press power button; vacuum will start.
Test attachments: Connect tools to wand for above-floor cleaning.

CAUTION! Keep cord clear of brush roll. Do not vacuum large objects or liquids.

Specifications

Model: Shark EP661C Upright Vacuum.
Power: 120V, 60Hz, 12 Amps.
Dust Cup Capacity: 1.5 quarts.
Filtration: HEPA filter + foam pre-motor filter.
Cord Length: 25 feet.
Attachments: Crevice tool, upholstery tool, dusting brush.
Brush Roll: Motorized, anti-hair wrap technology.
Weight: 15 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power button, Suction control dial, Hose release button.

Body: Brush roll on/off switch, Dust cup release, Height adjustment lever.

Settings: Suction (Low/Medium/High), Brush roll (On/Off for delicate rugs), Height (Low for carpets, High for hard floors).

Using Attachments

For above-floor cleaning: furniture, stairs, ceilings, tight spaces.

Turn off vacuum and unplug.
Remove wand from hose.
Attach desired tool to wand end.
Plug in, turn on, and clean.
Switch tools as needed; store on clips when done.

Tip: Use upholstery tool for curtains and car interiors; crevice tool for baseboards.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup when full or after each use.
Check brush roll monthly for tangled hair/debris; cut away with scissors if needed.
Inspect hose for clogs; remove obstructions.
Wipe exterior with damp cloth; avoid water near electrical parts.

WARNING! Unplug before any maintenance. Do not immerse in water.

Emptying the Dust Cup

Empty when debris reaches MAX line.

Turn off and unplug vacuum.
Press dust cup release button; lift cup out.
Hold over trash; press bottom latch to open door.
Shake gently to empty.
Close door, reinsert cup until it clicks.

CAUTION! Empty outdoors if possible to reduce dust. Avoid touching filter during emptying.

Filter Care

Filters require regular cleaning for maximum suction.

HEPA Filter: Rinse under cold water every 3 months; air dry 24 hours before reinstalling.

Pre-motor Foam Filter: Wash monthly; air dry completely.

Note: Do not use vacuum without filters. Replace HEPA filter annually or when damaged.

Safety Information

Read all instructions before use. Keep away from children. Do not use near flammable liquids. Do not pick up sharp objects, matches, or ashes. Avoid vacuuming cords or loose clothing. Unplug when not in use. For support, visit sharkclean.com or call 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check hose for blockages.
Brush roll not spinning	Tangled debris/switch off	Turn off, unplug, remove debris from brush roll; ensure brush roll switch is ON.
Vacuum won't turn on	Power cord/outlet issue	Check plug connection; try different outlet; inspect cord for damage.
Unusual noise	Obstruction in hose or brush roll	Turn off, unplug, inspect hose and brush roll for foreign objects.
Dust cup not seating	Misaligned or full filter	Remove and reinsert; ensure filter is clean and properly placed.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com