Shark EP661 Vacuum Cleaner Manual

The Shark EP661 is a powerful upright vacuum cleaner designed for deep carpet and hard floor cleaning. It features a Lift-Away canister for portable cleaning above the floor, a HEPA filter system for allergen capture, multiple brush rolls for different surfaces, a large dust cup capacity, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with motorized brush roll, Lift-Away canister, HEPA filter, dust cup, crevice tool, dusting brush, upholstery tool, and power cord.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into upright body until it clicks into place.
2. Install wand: Insert wand into hose connector until secure.
3. Attach hose: Connect hose to canister port.
4. Install filter: Place HEPA filter into filter compartment.
5. Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow initial setup steps.

1. Select surface setting: Adjust height dial for carpet or hard floor.
2. Turn on power: Press power switch to ON position.
3. Test brush roll: Engage brush roll for carpets; disengage for hard floors.
4. Empty dust cup: Check dust cup level before and after use.

CAUTION! Keep vacuum upright on stable surface during operation.

Specifications

• Model: Shark EP661.
• Type: Upright with Lift-Away canister.
• Filtration: HEPA filter system.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Access controls on handle and body. Handle: Power switch, brush roll switch. Body: Height adjustment dial, wand release button.

Settings: Power ON/OFF, brush roll ON/OFF, height adjustment (1-5 for carpets, bare floor setting).

Operation: Use power switch to start/stop. Adjust height for carpet pile. Use brush roll switch to toggle brush for different surfaces. Press wand release to detach wand for attachments.

Using Attachments

Attachments: Crevice tool, dusting brush, upholstery tool.

1. Detach wand: Press wand release button and remove wand.
2. Connect attachment: Insert desired tool into wand end.
3. Select mode: Use Lift-Away canister for above-floor cleaning.
4. Clean: Guide tool over surfaces; empty dust cup as needed.

Tip: Ensure vacuum is off when changing attachments.

Cleaning Modes

Supports upright and portable cleaning.

1. Upright mode: Use for floor cleaning with brush roll engaged.
2. Lift-Away mode: Detach canister for stairs, furniture, ceilings.
3. Hard floor mode: Disable brush roll and adjust height to bare floor.
4. Carpet mode: Enable brush roll and set appropriate height.
5. Attachment mode: Use tools for detailed cleaning.

WARNING! Do not use on wet surfaces. Keep hair and strings away from brush roll.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty after each use.
2. Clean filter: Remove and tap HEPA filter monthly; rinse if washable (air dry completely).
3. Check brush roll: Remove debris from brush roll regularly.
4. Inspect hose: Clear clogs if suction decreases.
5. Store properly: Wrap cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Safety Information

Read all instructions before use. Keep away from children. Do not use near water. Do not pick up hot ashes or flammable materials.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com