Shark EP604 Vacuum Cleaner Manual

The Shark EP604 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brush roll, multiple suction settings, a large-capacity dust cup, HEPA filtration, LED headlights, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with motorized brush roll, Dust Cup with HEPA filter, Handle with controls, Power cord, LED headlights, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install dust cup: Slide dust cup into place until it locks.
3. Insert filter: Place HEPA filter into filter compartment.
4. Attach hose: Connect hose to port on front of vacuum.
5. Store attachments: Hang tools on provided hooks.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in power cord; select appropriate settings.

1. Select floor type: Use suction control for carpets (high) or hard floors (low).
2. Turn on brush roll: Engage for carpets; disengage for hard floors.
3. Begin vacuuming: Push vacuum forward and back in overlapping strokes.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Keep cord away from brush roll. Do not vacuum large objects.

Specifications

• Model: Shark EP604 Upright Vacuum.
• Power: 120V, 60Hz, 12 Amps.
• Suction Power: Adjustable via suction control dial.
• Dust Cup Capacity: 1.5 liters.
• Filtration: HEPA filter, washable.
• Cord Length: 25 feet.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle. Power Switch: Turns vacuum on/off. Suction Control: Adjusts suction power (High for carpets, Low for hard floors). Brush Roll Switch: Engages/disengages motorized brush roll. Handle Release: Allows vacuum to recline.

LED Indicators: Lights indicate power on and brush roll engagement.

Settings: Use high suction for deep carpet cleaning; low suction for delicate rugs and hard floors. Disengage brush roll on hard floors to prevent scattering debris.

Using Attachments

Attach tools to hose for above-floor cleaning.

1. Turn off vacuum and unplug.
2. Remove hose from dock.
3. Connect desired tool to hose end.
4. Plug in vacuum and turn on.
5. Clean upholstery, ceilings, corners, etc.

Tip: Use crevice tool for tight spaces; dusting brush for delicate surfaces.

Cleaning Modes

Supports carpet, hard floor, and above-floor cleaning.

1. Carpet mode: Engage brush roll; set suction to High.
2. Hard floor mode: Disengage brush roll; set suction to Low.
3. Above-floor mode: Use attachments with hose.
4. Spot cleaning: Use hose with appropriate tool for small areas.

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use or when full.
2. Clean filter: Rinse HEPA filter monthly; air dry completely.
3. Check brush roll: Remove hair and debris regularly.
4. Inspect hose: Clear clogs if suction decreases.
5. Store properly: Wrap cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Safety Information

Read all instructions before use. Keep away from children. Do not use near water. Do not vacuum flammable materials. Unplug when not in use.

WARNING! Risk of electric shock. Do not use with damaged cord or plug.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com