Shark EP602RF Vacuum Cleaner Manual

The Shark EP602RF is a versatile cordless stick vacuum cleaner with powerful suction, a rechargeable lithium-ion battery, multiple cleaning modes, HEPA filtration, LED headlights, and a lightweight, maneuverable design. It includes a motorized brush roll for carpets, a crevice tool, dusting brush, and a wall-mounted charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, motorized floor nozzle, rechargeable battery, wall-mounted charging dock, crevice tool, dusting brush, and HEPA filter.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach wand: Insert wand into vacuum body until it clicks.
2. Attach floor nozzle: Connect nozzle to wand until it clicks securely.
3. Install accessories: Clip crevice tool and dusting brush onto dock.
4. Mount charging dock: Secure to wall using provided screws and anchors.
5. Charge battery: Place vacuum onto dock; charge fully before first use (approx. 4 hours).

WARNING! Ensure dock is securely mounted to prevent falling. Use correct wall anchors for your wall type.

First-Time Use

Fully charge the vacuum before initial operation.

1. Power on: Press Power button; LED indicator will illuminate.
2. Select mode: Press Power button repeatedly to cycle through Eco, Normal, and Max suction modes.
3. Begin cleaning: Push vacuum forward on floor; motorized brush roll engages automatically on carpets.
4. Use attachments: Detach wand to use crevice tool or dusting brush for above-floor cleaning.
5. Empty dust cup: Press release button and empty contents into trash after each use.

CAUTION! Do not use on wet surfaces. Keep hair, strings, and cords away from brush roll.

Specifications

• Model: Shark EP602RF.
• Type: Cordless stick vacuum with handheld capability.
• Battery: Rechargeable lithium-ion, 22.2V.
• Run Time: Up to 40 minutes (Eco mode), 20 minutes (Max mode).
• Charge Time: Approximately 4 hours for full charge.
• Filtration: HEPA filter, washable.
• Dust Cup Capacity: 0.7 liters.
• Weight: 6.8 lbs (with floor nozzle attached).
• Included Accessories: Motorized floor nozzle, crevice tool, dusting brush, charging dock.
• Warranty: 5-year limited warranty (see manual for details).

Controls and Settings

Main controls located on vacuum handle and body.

Power Button: Turns vacuum on/off; cycles through Eco (low), Normal (medium), and Max (high) suction modes. Battery Indicator: 3 LED lights show charge level (green = high, amber = medium, red = low). Brush Roll Switch: On floor nozzle to turn brush roll on/off (off for hard floors, on for carpets). Wand Release Button: Detaches wand for handheld cleaning. Dust Cup Release Button: Opens bottom of dust cup for emptying.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

1. Motorized Floor Nozzle: For carpets and hard floors; brush roll removes embedded dirt.
2. Crevice Tool: For tight spaces like between cushions, along edges, and in corners.
3. Dusting Brush: For delicate surfaces like blinds, lampshades, and keyboards.
4. Charging Dock: Stores vacuum and charges battery; includes hooks for tools.

Tip: Always turn off vacuum before changing attachments.

Cleaning Modes & Techniques

Optimize cleaning based on surface and debris type.

1. Eco Mode: For light cleaning and extended run time (up to 40 min).
2. Normal Mode: For everyday cleaning on mixed surfaces (up to 30 min).
3. Max Mode: For deep cleaning and high-pile carpets (up to 20 min).
4. Hard Floors: Turn off brush roll to prevent scattering debris.
5. Carpets: Use brush roll on; make slow, overlapping passes.
6. Above-Floor Cleaning: Detach wand; attach crevice tool or dusting brush.
7. Under Furniture: LED headlights illuminate hidden areas.

WARNING! Do not vacuum up large objects, liquids, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty Dust Cup: After each use; press release button and empty into trash.
2. Clean Filter: Remove HEPA filter every month; rinse under cold water, air dry 24 hours before reinstalling.
3. Clear Brush Roll: Regularly remove hair and fibers wrapped around brush roll; use scissors if necessary.
4. Check for Blockages: If suction decreases, check wand, nozzle, and dust cup for clogs.
5. Battery Care: Store vacuum on charging dock when not in use; avoid extreme temperatures.

CAUTION! Do not use vacuum without filter. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. This product is protected by patents and design registrations. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Reset: Remove battery for 10 minutes, then reinstall.

Service: 1-800-798-7398; www.sharkclean.com