Shark EP600NF Vacuum Cleaner Manual

The Shark EP600NF is a versatile upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes, LED headlights, a large-capacity dust cup, and specialized attachments for floors, carpets, and above-floor cleaning. It includes a motorized brush roll, crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, motorized floor nozzle, wand, hose, dust cup with HEPA filter, and accessory tools.

Feature	Description
Powerful Suction	High-performance motor for deep cleaning
HEPA Filtration	Captures 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Motorized Brush Roll	Automatically adjusts between carpets and hard floors
Large Dust Cup	Easy-to-empty, no bags required
Crevice Tool	For tight spaces and corners
Dusting Brush	Gentle cleaning for delicate surfaces
Upholstery Tool	For sofas, chairs, and stairs
On-Board Storage	Holds tools for easy access
Adjustable Handle	Comfortable cleaning at different heights

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach the wand: Insert into the vacuum body until it clicks.
Connect the hose: Attach to the wand and body ports.
Install floor nozzle: Slide onto the wand until secure.
Mount accessories: Store tools on the onboard caddy.
Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Power on vacuum; select appropriate cleaning mode.

Check filters: Ensure HEPA and pre-motor filters are installed.
Empty dust cup: Confirm it is empty before use.
Select surface setting: Use dial on floor nozzle for carpets or hard floors.
Begin cleaning: Move vacuum in slow, overlapping passes.
Use attachments: Switch to above-floor tools as needed.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Avoid pulling by the cord.

Specifications

Model: Shark EP600NF.
Power: 120V, 60Hz, 12 Amps.
Suction Power: Adjustable via settings.
Filtration: HEPA filter, washable pre-motor filter.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Weight: 15 lbs.
Noise Level: ≤75 dB.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, suction control slider, wand release button.

Floor Nozzle: Surface dial (Carpet/Hard Floor), brush roll on/off switch, LED lights.

Settings: Suction power (High/Medium/Low), brush roll activation, surface type selection. Use power switch for on/off; suction control to adjust airflow; wand release to detach for above-floor cleaning.

Using Attachments

Attach tools to wand or hose for specialized cleaning.

Detach wand: Press release button and pull from body.
Connect tool: Insert into wand or hose end.
Crevice tool: For edges, corners, and between cushions.
Dusting brush: For shelves, blinds, and electronics.
Upholstery tool: For furniture and stairs.

Tip: Ensure connections are secure to maintain suction.

Cleaning Modes

Adjust settings based on surface and debris type.

Carpet mode: Activates motorized brush roll for deep cleaning.
Hard floor mode: Deactivates brush roll to prevent scattering debris.
Above-floor mode: Use wand and attachments for furniture and ceilings.
High suction: For thick carpets or heavy dirt.
Low suction: For delicate rugs or hard floors.

WARNING! Do not use carpet mode on hard floors without rugs; may cause damage.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: When full or after each use.
Clean filters: Rinse HEPA and pre-motor filters monthly; air dry 24 hours.
Clear brush roll: Remove hair and threads regularly.
Check for blockages: Inspect hose, wand, and nozzle if suction decreases.
Inspect cord: For damage; do not use if frayed.

CAUTION! Unplug vacuum before maintenance. Do not operate with wet filters.

Care & Storage

Store in a cool, dry place. Keep away from heat sources.

Wrap cord around cord hooks. Ensure dust cup is empty and filters are dry before storage.

CAUTION! Do not store with wet filters; may cause mold or odor.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brush roll not spinning	Obstruction or belt	Clear debris from brush roll; inspect belt for wear.
Vacuum shuts off	Overheating or full filter	Allow to cool; clean or replace filters.
LED lights not working	Connection or bulb	Ensure nozzle is attached; contact support if faulty.
Unusual noise	Foreign object in motor or brush	Turn off, unplug, and inspect for obstructions.

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-798-7398; www.sharkclean.com