Shark EP600LN Vacuum Cleaner Manual

The Shark EP600LN is a versatile upright vacuum cleaner with powerful suction, advanced swivel steering, a HEPA filtration system, multiple cleaning modes for carpets and hard floors, a detachable canister for portable cleaning, LED headlights, and a variety of specialized attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body with motorized brush roll, detachable pod, swivel steering handle, HEPA filter, dust cup, and accessory storage.

Feature	Description
Motorized Brush Roll	Deep cleans carpets and agitates embedded dirt
Swivel Steering	Provides maneuverability around furniture and obstacles
HEPA Filtration System	Captures 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Detachable Pod	Converts to a portable canister for above-floor cleaning
Multi-Surface Settings	Adjustable for carpets, hard floors, and area rugs
Large Capacity Dust Cup	Easy-empty bin with one-touch release
Accessory Storage	Built-in caddy for crevice tool, upholstery tool, and dusting brush
Power Cord	25-foot retractable cord with cord wrap
Washable Filters	Main and post-motor filters are reusable

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat surface.

Attach handle: Align handle with upright body until it clicks into place.
Install hose: Connect hose to the front of the vacuum body and secure.
Attach accessories: Store crevice tool, upholstery tool, and dusting brush in built-in caddy.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brush roll during assembly.

First-Time Use

Before first use, fully charge if applicable (check model), or plug in directly.

Select surface setting: Use dial on handle to choose CARPET, HARD FLOOR, or AREA RUG.
Adjust height: For carpets, ensure brush roll contacts floor; for hard floors, raise slightly.
Turn on: Press power button on handle; LED lights will illuminate.
Begin cleaning: Push vacuum forward and back in overlapping strokes.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Model: Shark EP600LN Upright Vacuum.
Power Source: 120V AC, 60Hz, corded.
Cord Length: 25 feet retractable.
Filtration: HEPA filter, washable foam and felt filters.
Dust Cup Capacity: 1.5 dry quarts.
Cleaning Path Width: 12 inches.
Weight: 14.5 lbs.
Attachments Included: Crevice tool, upholstery tool, dusting brush.
Warranty: 5-year limited warranty.

Controls and Settings

Handle controls: Power button, surface mode dial (Carpet/Hard Floor/Area Rug), brush roll on/off switch.

Pod Controls: Release button to detach pod, suction control slider, accessory port for tools.

Settings: Adjust suction power via slider on pod. Use brush roll on/off for delicate rugs or hard floors. LED lights activate automatically when powered on.

Using Attachments

Detach pod for above-floor cleaning: Press release button, lift pod off upright body.

Select tool: Choose crevice tool for tight spaces, upholstery tool for furniture, dusting brush for surfaces.
Connect: Insert tool into accessory port on hose or pod.
Adjust suction: Use slider on pod for higher/lower suction as needed.
Clean: Move tool over surface; empty dust cup when full.

Tip: For best results, clear area of large debris before using attachments.

Cleaning Modes

Three primary modes for different surfaces.

Carpet Mode: Brush roll on, maximum suction. Use for medium to high-pile carpets.
Hard Floor Mode: Brush roll off or raised. Use for wood, tile, laminate to avoid scattering debris.
Area Rug Mode: Brush roll on, reduced suction. Use for delicate rugs and low-pile carpets.

WARNING! Do not use carpet mode on hard floors as it may cause damage. Always turn off vacuum before changing modes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove cup, empty into trash. Do not overfill.
Clean filters: Remove foam and felt filters every month, rinse with cold water, air dry 24 hours before reinstalling.
Clear brush roll: Turn off and unplug. Use scissors to cut away hair and fibers wrapped around roll.
Check for blockages: Inspect hose, wand, and accessories if suction decreases.

CAUTION! Unplug vacuum before maintenance. Never use without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; clear hose blockage.
Brush roll not spinning	Obstruction, belt damage	Turn off and unplug; clear debris from brush roll; inspect belt.
Vacuum won't turn on	Power cord not plugged in, outlet issue	Ensure cord is securely plugged into working outlet.
LED lights not working	Bulb issue, power connection	Check power; if under warranty, contact support.
Unusual noise	Foreign object in brush roll or hose	Turn off immediately; inspect brush roll and hose for obstructions.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com