Shark EP600 Vacuum Cleaner Manual

The Shark EP600 is a powerful upright vacuum cleaner featuring advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, swivel steering for maneuverability, multiple cleaning modes, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, handle, DuoClean floor nozzle, dust cup, hose, wand, and accessory attachments.

FeatureDescription
DuoClean TechnologyCombines bristle brush and soft roller for debris on all floor types
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Large Capacity Dust CupEasy-to-empty, bagless design
Swivel SteeringProvides excellent maneuverability around obstacles
Cleaning ModesHard Floor, Carpet, and Bare Floor settings
Power ButtonTurns vacuum on/off
Brushroll ControlEngages/disengages brushroll for delicate rugs
Handle ReleaseAllows vacuum to recline for under furniture cleaning
Accessory StorageIntegrated caddy for storing attachments on the vacuum

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

  1. Attach the handle: Align the handle with the main body and push down until it clicks into place.
  2. Install the floor nozzle: Connect the nozzle to the bottom of the vacuum until it locks securely.
  3. Attach the hose and wand: Connect the wand to the hose inlet, then attach the hose to the back of the vacuum.
  4. Plug into a standard 120V AC power outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all parts are securely connected and the dust cup is empty.

  1. Select cleaning mode: Use the floor selector switch (Hard Floor/Carpet) based on your surface.
  2. Power on: Press the power button on the handle.
  3. Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
  4. Empty dust cup: Press the release button to remove and empty the cup after use or when full.

CAUTION! Do not vacuum large, hard objects or liquids. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

Controls and Settings

Main controls located on the handle and body. Handle: Power button, brushroll on/off switch. Body: Floor selector switch, handle release, dust cup release.

Settings: Hard Floor mode (for tile, wood), Carpet mode (for low to medium pile), Bare Floor mode (disengages brushroll).

Accessory use: Detach wand and attach tools for above-floor cleaning. LED lights: Automatically illuminate when vacuum is powered on.

Using Attachments

For above-floor cleaning: detach the wand and hose from the vacuum body.

  1. Select the desired attachment (crevice tool, dusting brush, etc.).
  2. Connect it to the end of the wand or directly to the hose.
  3. Power on the vacuum and begin cleaning.
  4. To switch back to floor cleaning, reattach the wand and hose to the vacuum body.

Tip: Store attachments on the integrated caddy for easy access.

Cleaning Modes

Optimize cleaning for different surfaces.

  1. Hard Floor Mode: Use on tile, hardwood, laminate. Engages both brushrolls.
  2. Carpet Mode: Use on low to medium pile carpets. Provides deeper agitation.
  3. Bare Floor Mode: Disengages the brushroll for delicate rugs or to prevent scattering debris.
  4. Brushroll On/Off: Use the switch on the handle to manually turn the brushroll on or off as needed.

WARNING! Do not use the brushroll on delicate, fringe, or tasseled rugs. Always test in an inconspicuous area first.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

  1. Empty dust cup after each use or when full.
  2. Check and clean the brushroll regularly to remove hair and fibers.
  3. Wash foam and felt filters every 3 months (air dry completely before reinstalling).
  4. Replace the HEPA filter every 12-18 months, or as needed.
  5. Inspect the hose and wand for clogs if suction power decreases.

CAUTION! Always unplug the vacuum before performing any maintenance. Do not use the vacuum without filters installed.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. All rights reserved. SHARK is a registered trademark of SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord not plugged inEnsure vacuum is plugged into a working outlet.
Loss of suctionFull dust cup or clogEmpty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinningBrushroll engaged for bare floors or cloggedSwitch to carpet mode; clean hair and debris from brushroll.
Vacuum is difficult to pushHeight setting too low for carpetAdjust floor selector to a higher setting for thicker carpet.
Unusual noiseForeign object in brushroll or motor areaTurn off and unplug vacuum; inspect and remove any obstructions.

Reset: Unplug vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com

Shark EP600 Vacuum Cleaner Manual © - All Rights Reserved 2025