Shark EP4535C 31 Vacuum Cleaner Manual

The Shark EP4535C 31 is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister mode for portable cleaning, a HEPA filter system, a motorized brushroll for carpets, and various attachments for above-floor cleaning. It is designed for residential use on multiple surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with handle, Lift-Away pod, dust cup, HEPA filter, motorized brushroll, crevice tool, dusting brush, upholstery tool, and wand.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into upright body until it clicks securely.
2. Install wand: Insert wand into socket on the back of the vacuum.
3. Attach hose: Connect hose to the port on the Lift-Away pod.
4. Attach floor nozzle: Ensure motorized brushroll is properly seated and clicks into place.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Before first use, ensure all filters are installed correctly.

1. Check filters: Ensure HEPA filter and pre-motor filter are in place.
2. Select mode: Choose upright mode for floors or Lift-Away mode for above-floor cleaning.
3. Adjust height: For carpets, set appropriate height setting on floor nozzle.
4. Turn on: Press power switch; select brushroll on/off as needed.
5. Empty dust cup: After use, press release button to empty cup into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark EP4535C 31.
• Type: Upright with Lift-Away canister.
• Filtration: HEPA filter system.
• Dust Cup Capacity: 1.5 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool, wand.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off button, suction control slider.

Body: Lift-Away release button, dust cup release, height adjustment lever.

Upright Mode: For floor cleaning. Lift-Away Mode: Press release button to detach pod for portable cleaning. Brushroll Control: Turn off for hard floors to prevent scattering debris. Suction Control: Adjust for delicate rugs or high-pile carpets. Height Adjustment: Multiple settings for different carpet types.

Using Attachments

Attach tools to wand or hose for above-floor cleaning.

1. Detach wand from back of vacuum.
2. Choose tool: Crevice tool for edges; dusting brush for shelves; upholstery tool for furniture.
3. Connect tool to end of wand or directly to hose.
4. Use in Lift-Away mode for maneuverability.

Tip: Ensure vacuum is on and suction is adequate for the attachment.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use or when full.
2. Clean filters: Rinse HEPA filter and pre-motor filter monthly under cold water; air dry completely for 24 hours before reinstalling.
3. Clear brushroll: Remove hair and debris from brushroll regularly; press release tabs to access.
4. Check hose and attachments for clogs.
5. Inspect cord for damage.

WARNING! Always unplug vacuum before maintenance. Do not operate with wet filters.

Storage

Store in a cool, dry place.

1. Wind cord around cord hooks.
2. Store attachments on vacuum or in provided caddy.
3. Ensure vacuum is clean and dry before storage.
4. Store upright to prevent damage.

CAUTION! Do not store near heat sources or in damp areas.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com