Shark EP045 Vacuum Cleaner Manual

The Shark EP045 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features advanced suction technology, a HEPA filtration system, multiple cleaning modes, LED headlights, a large-capacity dust cup, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized brush roll, HEPA filter, LED headlights, Dust cup with easy-empty mechanism, Hose and wand assembly, Multiple cleaning attachments.

Feature	Description
Motorized Brush Roll	Deep cleans carpets and agitates embedded dirt
HEPA Filtration System	Captures 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	0.8-gallon capacity with one-touch emptying
Cleaning Modes	Carpet, Hard Floor, and Area Rug settings
Attachments Included	Crevice tool, dusting brush, upholstery tool
Power Switch	Turns vacuum on/off
Brush Roll On/Off	Disengages brush roll for hard floors
Suction Control	Adjusts suction power for different surfaces
Wand Release	Quickly detaches wand for above-floor cleaning

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into body until it clicks securely.
Install wand: Insert wand into hose connection until locked.
Attach hose: Connect hose to vacuum body and wand.
Install filters: Place HEPA filter and pre-motor filter as indicated.
Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before first use, fully charge if cordless model, or plug in for corded model.

Select cleaning mode: Use dial to choose Carpet, Hard Floor, or Area Rug.
Adjust height: Set appropriate carpet height if adjustable.
Turn on: Press power switch; LED lights will illuminate.
Begin cleaning: Push vacuum forward and back in overlapping strokes.
Empty dust cup: Press release button and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll.

Specifications

Model: Shark EP045 Upright Vacuum.
Power Source: 120V AC, 60Hz (corded).
Suction Power: Advanced cyclonic suction technology.
Filtration: HEPA filter with anti-allergen seal.
Dust Cup Capacity: 0.8 gallons (3 liters).
Cord Length: 25 feet.
Weight: 15 lbs.
Warranty: 5-year limited warranty.
Operating Noise: ≤75 dB.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power switch, Suction control slider, Brush roll on/off button.

Body Controls: Carpet height adjustment dial, Dust cup release button, Wand release pedal.

Settings: Carpet mode (default), Hard Floor mode (brush roll off), Area Rug mode (medium suction). LED indicators show power status and filter maintenance reminders.

Using Attachments

Attachments stored on vacuum body. For above-floor cleaning:

Detach wand: Press wand release pedal and pull wand out.
Choose attachment: Connect crevice tool, dusting brush, or upholstery tool to wand.
Clean: Use attachment for tight spaces, furniture, or ceilings.
Reattach: Return wand to storage position after use.

Tip: Ensure attachments click securely into place before use.

Cleaning Modes

Three primary cleaning modes for different surfaces.

Carpet Mode: Brush roll on, maximum suction for deep cleaning.
Hard Floor Mode: Brush roll off, suction reduced to prevent scattering debris.
Area Rug Mode: Brush roll on, medium suction to prevent rug movement.

To switch modes: Turn dial on vacuum body to desired setting. LED indicator will show active mode.

WARNING! Do not use carpet mode on hard floors; may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Clean filters monthly: Tap out debris; wash with cold water if washable.
Check brush roll weekly: Remove tangled hair or fibers.
Inspect hose for clogs if suction decreases.
Store in dry, cool place.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinserting.

Safety Information

Read all instructions before use. Keep away from children.

Do not use near water or wet surfaces.
Do not vacuum hot ashes or sharp objects.
Do not block suction inlet or hose.
Use only Shark-branded filters and accessories.
Disconnect plug before servicing.

WARNING! Risk of electric shock. Do not use if cord or plug is damaged.

Regulatory Information

FCC Part 15 Compliant. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose and inlet for blockages.
Brush roll not spinning	Tangled debris or belt	Turn off and unplug; clear brush roll; check belt.
Vacuum won't turn on	Power cord or outlet issue	Check plug connection; try different outlet; inspect cord.
Unusual noise	Foreign object in brush roll or motor	Turn off immediately; remove object; check for damage.
Overheating	Clogged filter or blocked airflow	Clean filters; ensure all airways are clear; let cool.

Reset: Unplug for 30 minutes to reset thermal protection.

Service: 1-800-798-7398; www.sharkclean.com