Shark EP035T2 Vacuum Cleaner Manual

The Shark EP035T2 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brushroll, advanced swivel steering, a large-capacity dust cup, HEPA filtration, multiple cleaning modes, and specialized attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, Swivel steering handle, Large-capacity dust cup with quick-release, HEPA filter, Carpet/Floor selector, On-board attachment holder, Power cord with wrap hooks.

Assembly & Setup

Unpack all components and inspect for damage.

1. Attach handle: Insert handle into vacuum body until it clicks into place.
2. Install wand: Insert wand into handle socket and push until secure.
3. Attach hose: Connect hose to vacuum front port; ensure tight fit.
4. Mount attachments: Place crevice tool and upholstery brush in on-board holders.
5. Install filters: Place pre-motor and HEPA filters in their compartments.

WARNING! Ensure vacuum is unplugged during assembly. Check all connections are secure before use.

First-Time Use

Prepare vacuum for initial cleaning session.

1. Check filters: Ensure both filters are properly installed and clean.
2. Select floor type: Set Carpet/Floor selector to appropriate position.
3. Plug in: Connect power cord to electrical outlet.
4. Turn on: Press power switch; adjust settings as needed.
5. Test attachments: Try each attachment to ensure proper connection.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark EP035T2 Upright Vacuum Cleaner.
• Power: 120V, 60Hz, 10A motor.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Filtration: HEPA filter with anti-allergen seal.
• Cleaning Modes: Carpet, Hard Floor, Above-Floor.
• Attachments: Crevice tool, Upholstery brush, Dusting brush.
• Weight: 15 pounds.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and vacuum body.

Handle Controls: Power switch, Brushroll on/off button, Wand release button.

Vacuum Body: Carpet/Floor selector dial, Dust cup release button, Hose release latch.

Settings: Carpet mode (brushroll engaged), Hard Floor mode (brushroll disengaged), Above-Floor mode (wand and attachments). Adjust suction power via carpet height setting. Use brushroll on/off to protect delicate rugs and hard floors.

Using Cleaning Attachments

For above-floor cleaning: furniture, stairs, ceilings, tight spaces.

1. Detach wand: Press wand release button and pull wand from handle.
2. Choose attachment: Select crevice tool, upholstery brush, or dusting brush.
3. Connect: Insert attachment into wand end until click.
4. Clean: Use appropriate technique for each surface.
5. Return: Reattach wand and store attachments when finished.

Tip: Clear hose of obstructions before attaching tools for optimal suction.

Cleaning Modes & Techniques

Optimize cleaning for different surfaces.

1. Carpets: Set selector to appropriate pile height; use slow, overlapping passes.
2. Hard floors: Disengage brushroll; use smooth, back-and-forth motions.
3. Area rugs: Test brushroll on corner first; use low pile setting.
4. Edges: Use crevice tool along baseboards and corners.
5. Upholstery: Use upholstery brush with gentle strokes.
6. Above floor: Use wand and attachments for ceilings, blinds, shelves.
7. Stairs: Detach hose and use appropriate attachment.

WARNING! Do not vacuum wet surfaces, liquids, or sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when cup is 2/3 full. Clean filters: Rinse pre-motor filter monthly; replace HEPA filter every 6-12 months. Check brushroll: Remove tangled hair and debris regularly. Inspect hose: Clear obstructions with long, flexible object. Store properly: Wrap cord, empty dust cup, store in dry area.

CAUTION! Unplug vacuum before all maintenance. Allow filters to dry completely before reinstalling.

Safety Information

Read all instructions before use.

• Use only as described in manual.
• Do not use outdoors or on wet surfaces.
• Do not pick up burning materials or toxic liquids.
• Keep hair, loose clothing, fingers away from openings.
• Turn off and unplug before servicing.
• Use only Shark-branded filters and parts.
• Do not use with damaged cord or plug.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. All rights reserved. SHARK is a registered trademark of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com